Juggernaut USA
4840 Van Gordon Street, Unit 300, Wheat Ridge 80033
We help turn your ride into an off-road beast! We install lift kits, bumpers, light bars and much more!
Need a tune? Maybe some advice? Message us with any questions.
11/03/2026
Here is a Cedric’s gen2 speed3 that we tuned remotely for him.
I we made a shocking
718 whp and 512 wtq
I have always said the CorkSport cst6 would show 700 whp one day.
Video is in the comments (don’t mind the quality)
Sp63 2.5l
Cst6
Cs stand alone fuel system
Cs 4 inch intake
Cm850 twin disc
Cs em
Cs tb
Cobb fmic
Damond stage3 occ
If you have a build you want help with, need tuning, or need someone to do the mechanical work for you. Choose PD Tuning and send us a message to get started.
Jaden dropped off his super clean gen2 speed 3 for maintenance and let us do what we do best.
93& E30 mix tunes
365/346 on pump 93
412/386 on E30
Pnp intake manifold
Cs exhaust manifold
BNR s4 turbo
Cobb FMIC
Cobb catted DP
CS 4 inch intake
TIAL BOV
3 Inch CBE
DM stage 3 cc setup w/PCV
3 port EBCS
Bosch 3 bar map sensor.
Hpfp
Stock engine and stock fuel system currently but I am sure the customer is gearing up for port injection.
09/21/2026
Connors car came in for diag due to odd issues.
Rough start
Lumpy idle
Misfires
Timing codes
Valvetrain noise
The further we dug the more issues we found until we found the nail in the coffin. Enjoy the pictures because this kind of stuff is the reason why we suggest letting experienced people help you with your builds.
This engine was assembled wrong and unfortunately for the owner he was sold something unaware of the issues the previous owner created.
I trust a stock engine more than most self assembled (built) engines at this point.
Stick with the mazdaspeed engine builders or ask us who we prefer.
Carlos dropped his gen1 off with a slew of parts from his old speed.
We usually do not take customer supplied parts because of the headaches. (This car proved why)
We still returned him a banger on a STOCK ENGINE. **Customer requested we exceed the factory limitations. We advised against it and the customer assumed all responsibility**
Stock engine
Jmfab IM
6port injection
Full race em
Custom fmic w tr8 core
Gtx3071r ewg
Htp 4 inch intake
Act 6 puck clutch
Cs 3.5 inch downpipe
Cp-e cbe
Tuned by me on pump 93 and e48
413/389 on pump 93
500/443 on e48
Got spinny drank on the dyno today after resolving an oil pump failure that almost made me build another engine.
New turbo dropped in (bnr s5) and added port injection so I can run full e85.
Pics in the comment of the goodies.
565/506
Built engine w stock valvetrain
Bnr s5 iwg
Damond 3.5 inch intake
damondmotorsports pi adapter
Revamp Motorsports wire tuck
PD Tuning Returnless pi w ethanol kit
PD Tuning cleaned and flow tested injectors
Ported stock intake manifold with all emissions components intact.
Some exhaust manifold that flowed decent.
Luk 10-64 clutch with fidanza flywheel (stock)
Reece brought his car in with mechanical issue that were repaired by us.
After that we threw it on the dyno and started tuning.
93 octane 476/418
E48 642/518
Built engine w/ valvetrain
Pulsar 6262 .63 ar hotside
Speed performance pi with double pump
2000 cc injectors
Custom exhaust manifold
4 inch intake
Very proud of this young man and I know he will be back for more power soon.
08/27/2026
Sold sold sold sold sold
Bnr s4 turbo for sale
New center section was installed by me.
This was in my car for 4k miles and I recently upgraded to an s5. So I put a new center section in it due to oil pressure concerns (engine).
Everything in the pictures is included and should be ready to drop in.
08/08/2026
Evan C. Hotto dropped his engine off with a spin rod bearing.
We swapped in an Overspeed Motorsports stage 1 engine bnrs4 and some more goodies to compliment his already modified car.
Full Koni/ eibach/ cs/ spc suspension was also added to help with the increase in power.
Gen2 speed3
OS stage 1 engine
Bnr s4 v5
Damond 3.5 inch intake
Stock manifolds
Act 6 puck
Tr8 intercooler
Damond catch cans
Damond pmm and rmm (street)
Corksport catted 3 inch downpipe/cbe
Cs 3.5 bar map sensor
Grimmspeed 3 port EBCS
Pd tuning cleaned and flow tested injectors
Once break in was completed we started the process of tuning.
371/380 on pump gas
397/392 on an e 30 mix
Dyno video will be in the comments.
07/20/2026
It’s Monday 🙄😑 We got this stock engine pulled on a gen2 speed 3 up next is a full build on stock fuel system.
Jordan Keefover stage 1
BNR Supercars, LLC bnr s4
Advanced Clutch 6 puck
Damond Motorsports intake, stage 3 catch can,engine mounts
CorkSport Performance tbe
Treadstone Performance Eng. tr8 fmic
Tuning will be completed with COBB Tuning ap v3
If you have maintenance or just need diag completed for your mazdaspeed 3/6 we do it all.
07/02/2026
Cyrus brought his BNR S3v5 MS3 in for a dyno tune
346/357 on 93 octane
392/409 on e30
This turbo hits hard and in our opinion what should have came on all mazdaspeeds. We are running deals on dyno tuning through the month of August. Pm us for scheduling.
4840 Van Gordon Street, Unit 300, Wheat Ridge 80033
We help turn your ride into an off-road beast! We install lift kits, bumpers, light bars and much more!
4509 Harlan Street, Wheat Ridge 80033
We are a family owed business that repairs and enhances your Hot Rod, Muscle Car, and Original Car.
11925 W I70 Frontage Road N #450, Wheat Ridge 80033
High Altitude Trucks is a shop in Colorado. We specialize in customizing and maintaining your truck!
4300 Kipling Street Unit A, Wheat Ridge 80033
Window Tint, PPF, Ceramic Coating, Vinyl Wraps. Wheat Ridge, CO. 415+ Five Star Google Reviews
4586 Holland Street, Wheat Ridge 80033
We specialize in 92-96 4th Generation Honda Prelude performance parts and upgrades.
Be the first to know and let us send you an email when PD Tuning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.
We will notify you when anything happens in Wheat Ridge.
Save businesses and follow local categories.
Complete the verification to continue.