Lava-forge
Share
Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Lava-forge, Hardware shop, 321 San Roque Drive, Walnut, CA.
We make gas burner forge & furnace by ourselves.We sell them by ourselves,so the price is the lowest and quality is good.Any questions please contact [email protected]
04/29/2024
This is the extra large casting sand mold I designed. available on ebay and amazon.Welcome to discuss.
03/28/2023
03/28/2023
Iron flower is a large-scale traditional fireworks which is cultural performance technique founded by ancient Chinese craftsmen in the process of casting utensils.
Do you want to buy one gas metal melting furnace?
Gas Metal Melting Furnace is used to melt copper, gold, silver, copper, aluminum, zinc, tin and other metals with melting points below 1300 ° C. Suitable for most fuels, liquefied gas，LPG, natural gas, propane, etc.
Many other people's single burner furnace has a problem, the flame can only heat one side of crucible strongly ,especially if you use a 10KG big size crucible, the flame can only reach to 1/3 or 1/2 wall of the crucible, the opposite side has no flame. So we often saw that some part of metal in crucible has been melted, but some other part is not yet. It means you need longer time and more gas to melt whole pot of metal, my dual burner solved this problem by heating 2 sides of crucible at the same time, it can save 50% time and 20% gas cost. As we know, 40%--70% gas energy is actually escaping in heating process, that is big waste . So if you melt fast, you save more propane cost.
08/02/2022
Forge Body: 19 Gauge (1mm) Stainless Steel Sheet, No need oil painting,highly resistant to corrosion.
Dual gas burner( stainless steel made,see the photo for the dimension)
Forge external dimension: 6” (H) x 6” (W) x 16” (L) (16cm x 16cm x 40cm) .
Forge internal dimension: 4” (H) x 4” (W) x 16” (L) . Height with Brick : 3” (7cm)
30 PSI adjustable regulator, 5 ft (1.5 m) long gas hose.
Interior lined with 1 inch thick ceramic wool and refractory brick.
Weight: 16 LB (7.5 kg).
Instruction manual included.
07/22/2022
Outer diameter ( O.D.) 2" air choke ( the 3 way tee with 2 mouth ) will attract maximum air flow into tube ,
it is self adjusting and drafts the proper amount of air based on gas pressure , with a proper gas tuned to produce higher BTU with less propane , this design is more efficient and saves propane cost .But if you want to adjust air flow or flame , it is easy to cut an aluminum cans by yourself to block part of mouth on the tee.
* The feed tube is 8" ( 20cm ) long ,3/4'' thread , outer diameter ( O.D.) is 1" . The flame cone on the bottom is 1-15/16"(48.5mm) O.D. wide. So you can open 1'' hole in your forge or furnace ( push in tube first, then screw the flame cone with tube inside forge), or open 2'' hole ( push the flame cone into forge)
Click here to claim your Sponsored Listing.
Category
Contact the business
Telephone
Address
321 San Roque Drive
Walnut, CA
91789