Pro Polymer Source Tulsa

🚨🔥 DON’T WATCH FROM THE SIDELINES — GET IN THE ROOM! 🔥🚨

We’re getting CLOSE to our Advanced Concrete Overlay Training at Pro Polymer Source Tulsa!

📅 September 23–24
$600 Per Person
⏰ 8:30 AM – 4:00 PM BOTH DAYS

This is your opportunity to spend TWO FULL DAYS HANDS-ON learning from:

🔥 Shawn Dennison — recognized across the United States for his advanced overlay installation skills, creativity, and craftsmanship.

🔥 Tim Couse — Co-Owner & Training Director of Durável, bringing years of system knowledge and real-world installation experience.

We’re talking:

💥 Advanced Overlay Techniques
💥 Vertical Systems
💥 Custom Floor Demonstrations
💥 Hands-On Installation
💥 Real-World Tips & Techniques

YOU WANT TO BE THE BEST? LEARN FROM SOME OF THE BEST.

Don’t be the contractor who sees the pictures AFTER the class and wishes you had been there.

👉 GET IN THE ROOM. GET HANDS-ON. ELEVATE YOUR CRAFT.

🥐 Breakfast provided BOTH days
🍽️ Lunch provided BOTH days
📍 Pro Polymer Source Tulsa
📞 918-419-2724

🚨 LIMITED SPOTS AVAILABLE — CALL TODAY TO RESERVE YOURS!

🔥 Feature Product: Endurable Concrete Armor 🔥

Easy application — T-bar or magic trowel, thick or thin.
Unmatched bond strength (1000+ PSI) and extreme durability.
Use it as a clear coat, broadcast system, or add color.

Fast dry times. Low VOC. Built to perform.

Prime it. Top it. Trust it.

For more information stop in or give us a call:

📞 918-419-2724
📍 802 W 1st Street, Tulsa, OK

💡 Don’t let the 28-day myth cost you a job.

Just because concrete is 28 days old doesn’t mean it’s ready to coat. Moisture can still be trapped in the slab, and rushing it can lead to coating failure.

👉 Always test for moisture and make sure the slab is truly dry before applying any system.

Need help or the right products to handle it? We’ve got you covered.

🚨🔥 TULSA — THIS IS ONE YOU DON’T WANT TO MISS! 🔥🚨

September 23–24 | 8:30 AM–4:00 PM

We’re bringing Shaun Denison and Tim Couse to Pro Polymer Source Tulsa for TWO DAYS of advanced, hands-on concrete overlay training!

💥 Shaun Denison — recognized across the country for his advanced overlay installation skills and craftsmanship.

💥 Tim Couse — Co-Owner & Training Director of Durável and an expert in taking these systems from product knowledge to real-world installation.

This isn’t a class where you sit around and watch.

YOU’RE GETTING HANDS-ON.

🔥 Advanced Overlay Systems
🔥 Vertical Systems
🔥 Custom Floor Demonstrations
🔥 Advanced Installation Techniques
🔥 Real-World Tips & Tricks
🔥 Direct Access to Shaun & Tim

If you want to separate yourself from the competition and take your craftsmanship to another level, THIS IS THE ROOM YOU WANT TO BE IN.

🥐 Breakfast provided BOTH days
🍽️ Lunch provided BOTH days
⏰ 8:30 AM–4:00 PM
📍 Pro Polymer Source Tulsa
📞 BZ - 682-651-7717 or office 918-419-2724

⚠️ SPOTS ARE LIMITED!

Don’t wait until the class is full and wish you had signed up.

🔥 INVEST IN YOUR CRAFT. ELEVATE YOUR SKILLS. GET IN THE ROOM. 🔥

🔥 CONTRACTOR SPOTLIGHT — CUTTING EDGE DECORATIVE CONCRETE COATINGS! 🔥

Today we’re showing off another great transformation by Cutting Edge Decorative Concrete Coatings!

This project started as basic concrete that needed some attention, including crack repair and proper preparation. Bill and the Cutting Edge team transformed it into a clean, professional-looking floor using:

🔸 Polymer Nation F-00 Tinted Epoxy
🔸 Wombat Flake
🔸 Polymer Nation F-61 Polyaspartic Top Coat

The difference a professionally installed coating system can make is incredible! 💪

🏠 Ready to transform the concrete at your home or facility?
Give Bill at Cutting Edge Decorative Concrete Coatings a call:
📞 918-617-3423

🛠️ Contractors — for all your tooling, coatings, and concrete preparation needs, Pro Polymer Source Tulsa has you covered!

📞 918-419-2724
📍 802 W. 1st Street, Tulsa, OK

Great products. Great contractors. Great results.

After

HAPPY LABOR DAY FROM PRO POLYMER SOURCE TULSA!

Today we celebrate the hardworking men and women who build, create, install, and keep our communities moving forward every single day.

To all of our contractors, customers, partners, and friends — THANK YOU for your hard work, dedication, and craftsmanship. We’re proud to work alongside you and support the people who continue to raise the bar in our industry. 💪

🔸 We are CLOSED today in observance of Labor Day.
🔸 We’ll be back OPEN tomorrow at 7:30 AM, ready to help with your next project!

Enjoy the day with your family and friends, stay safe, and take a well-deserved break!

From all of us at Pro Polymer Source Tulsa — Happy Labor Day! 🇺🇸

📍 802 W. 1st Street, Tulsa, OK
📞 918-419-2724

PEOPLE. PRODUCTS. KNOWLEDGE. BUILDING A STRONGER TOMORROW.

📢 LABOR DAY HOURS REMINDER

The Pro Polymer Source Tulsa Team would like to remind everyone that we will be closing at 12:00 PM on Friday, September 4th and will be closed Monday, September 7th in observance of Labor Day.

We wish everyone a safe and healthy Labor Day weekend and look forward to helping you again when we reopen Tuesday, September 8th at 7:30 AM!

If you need materials for an upcoming job, please let us know early in the week so our team can help get your products and orders ready before the holiday weekend.

Thank you for your continued support!

— The PPST Team

📍 802 W. 1st Street, Tulsa, OK
📞 918-419-2724