Alpine Van Works

This is the face of pure EXCITEMENT 🤩

We’re soft launching our brand new website tomorrow — and we couldn’t wait to celebrate with you.

Reese is especially fired up because we’re kicking things off with some BIG savings:
✨ 15% OFF all AVW-branded products
✨ 10% OFF the rest of the site
(some exclusions apply)

Get ready to explore, shop, and score some deals — see you tomorrow 🚐💨

BACK IN-STOCK 💁🏼‍♀️

Our Dual-Fold Single Bench-To-Bed Seat is the perfect choice for vans and RVs with limited space. The single 20” chair flips forward creating a bed in conjunction with the front swivel seat. L-track mounting brackets provide easy installation and secure placement. With its car seat restraints and 3-point harness, as well as a cubby for storage in the aluminum seat base, this seat offers essential features for comfort, safety, and convenience.

While the seat or base has not been pull tested to any DOT standards (because it is cost prohibitive), the seat base and mounting were designed by an engineer with a baby on the way and it was designed to withstand at least 8,000lb pull test. Please note that RV’s are not held to DOT standards for seating partially because of their weight and the momentum that creates.

𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒:
•Mounting Hardware
•(2) 40-inch Pieces of Recessed Fl**ge L-Track
•Uwin Quick Release Seat Lockers (Optional Add-On)
•Aluminum Seat Base with Storage Cubby
•CRS Hooks (Carseat Hooks)
•3pt Harness (Seatbelt)
•High-End Faux Leather Upholstery

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

𝐈𝐧𝐬𝐮𝐥𝐚𝐭𝐞𝐝 𝐅𝐥𝐨𝐨𝐫 𝐊𝐢𝐭 ⚒️ 🧰

A turnkey flooring system that simultaneously insulates and sound deadens with an easy-to-install black powder coated steel trim package. The system glues down so you will never deal with rust issues under your rig or squeaking from screws through your floor.

This floor system uses 1” Coosa Board Fiber Reinforced Foam that is rot free, nearly half the weight of plywood with 3x the insulation properties (R3), sound deadening, dimensionally stable and cnc cut to your floor.

Our new and improved trim package includes a step extension so you can extend your cabinets past the C pillar. This step allows for a 25” entry at the sliding door. It also has a small cubby in the step extension for smaller items like sunscreen, bugspray, flashlight, etc.

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

Looking for a game-changer in your van’s interior?

We now carry CVC swivel seat kits that are perfect for transforming your van’s seating arrangement.

These seats are made-in-the-USA, DOT & FMVSS compliant. You’ll find seats for Sprinter, Transit & ANY cargo van!

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

NEW PRODUCT RELEASE:

The AVW Insulated Cab Curtain is made with dual-layer reflective/blackout fabric. The design allows you to capture the extra 12 square feet in the cab, so you can include your swivel seats in your living space. The curtain can be deployed when the seats are forward or backward.

The reflective fabric is reversible so that in the summer you can have the the reflective side out to keep your van cool and in the winter point it in to keep that radiant heat trapped inside.

This curtain is a must have for anyone planning on urban camping in their van! The curtain simply ties back to stay out of the way when not in use.

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

.essential soft storage is great for storing just about anything!

Find it on our website!

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

𝐏𝐑𝐄-𝐁𝐋𝐀𝐂𝐊 𝐅𝐑𝐈𝐃𝐀𝐘 𝐀𝐍𝐍𝐎𝐔𝐍𝐂𝐄𝐌𝐄𝐍𝐓!!!

Our refined, lightweight, versatile, interior paneling kits that go together in less than a day, for both TRANSIT & SPRINTER will be 15% off Black Friday thru Cyber Monday!

If you are ready to make your purchase now or you have questions to finalize your decision send us a DM or an email to Amanda - [email protected]

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

Alpaca Cargo Plates are flying off the shelf and freeing up roof and rear door space on vans across the nation. Toss your or your shovel and axe up and out of the way so you keep that valuable roof space for stargazing.

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

The Alpaca Cargo Plate™️ 𝐍𝐎𝐖 𝐀𝐕𝐀𝐈𝐋𝐀𝐁𝐋𝐄 𝐅𝐎𝐑 𝐓𝐑𝐀𝐍𝐒𝐈𝐓 is a revolutionary new way to free up your back doors and roof rack on just about any van! This plate bolts onto the roof without the need for a roof rack or any holes drilled! Two stainless steel glue down fasteners and marine epoxy are sent with the kit to mount the plate with only two hours of cure time and you are ready to load within 24 hours!

Got Maxtrax floating around your van? Get them up and out of reach when combining them with the Maxtrax mounting pins and you can mount (4) Maxtrax on one plate.

You can also mount Rotopax, Axe, Shovel, Hi-Lift Jack, or just about anything else to the multiple mounting locations.

The magnetic lower mounts have rubber covering them so you are not scratching the side of the van and there are no holes drilled anywhere! The entire thing mounts with just (2) bolts and goes in - in a matter of minutes!

𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓

Attention Ford Transit Owners!

Our best selling cargo plate which was previously only available to Sprinter owners is now available for Ford Transit!

Don’t take up precious roof space with Maxtrax and Rotopax.
Sling it on the side with our no-holes-drilled Alpaca Plate!

Pricing and website update coming soon! Check back next week!
𝑻𝒉𝒆 𝑫𝑰𝒀 𝑪𝒆𝒏𝒕𝒆𝒓