Riverside Performance Engines
Family-owned. Hardworking. Engine obsessed. Arkansas’ go-to machine shop since ’77. Your vision. Our engine.
📍 Little Rock | 📞 501-372-0985
02/25/2026
Behind every great engine rebuild is a team working together, every step of the way. It takes collaboration, attention to detail, and a shared commitment to excellence to deliver results you can trust.
When our team combines experience and a passion for what we do, the outcome is always the same: high-quality work that lasts!🤝⚙️
This cylinder head got a much-needed refresh and machine work. It’s cleaned up and ready to run. 🔥
performanceengines enginebuilders precisionmachining arkansasengines littlerockar
02/19/2026
Classic on the outside. All business under the hood. 🔥
Precision engine work, start to finish.
performanceengines shoplife arkansasengines littlerockar
02/16/2026
Did you know we offer more than precision engine machining? 👏With our in-house lift and full-service capabilities, we’re able to support engine work from removal to final install — no bouncing between shops required.
And now, we’re offering basic mechanical services too, including oil changes, brakes, tire rotations, and more. Whether you need routine maintenance or a full rebuild, we’ve got you covered.
We service & rebuild:
✅ Natural gas engines
✅ Diesel engines
✅ Automotive engines
✅ Agricultural engines
✅ High Performance engines
Riverside Performance Engines. Built to last.
📞 501.372.0985
📍 Little Rock, Arkansas + beyond
02/13/2026
We’ve torn down enough engines to know this: 👇
Most failures start small. A contaminant you can’t see. A surface that wasn’t protected. A detail that didn’t seem important at the time.
That’s why “clean” has to mean more than just looking good. Controlled environments, attention to detail, and disciplined assembly processes are what protect those tolerances and give an engine a fighting chance at a long life. 🔥
Questions about clean-room assembly? Let’s talk!
02/12/2026
By the time an engine gets here, it’s already been through a lot.
➡️Heat cycles. Miles. Hard work.
This cylinder head came in showing the story — carbon buildup, worn sealing surfaces, and lost efficiency.
Our job is to erase that wear and bring everything back into spec — down to thousandths of an inch. That precision comes from decades at the machine, not trial and error.
Arkansas’ home for real, precise engine work.
📞 501.372.0985
📍 Little Rock, Arkansas + beyond
📩 DM us if you need engine services
02/10/2026
Choosing Riverside means choosing top-notch quality from engine specialists with 50+ years of experience 👏
We know that for many of you, your livelihood depends on an engine you can count on — and we don’t take that lightly. Whether that’s keeping the roads hot and the country running, chasing a little speed after a long week, or simply getting the family to dinner… a vehicle you can depend on matters.
We specialize in:
🔩Diesel engines
🔩Automotive engines
🔩High Performance engines
🔩Natural gas engines
🔩Agricultural engines
Arkansas’ home for real, precise engine work.
📞 501.372.0985
📍 Little Rock, Arkansas + beyond
📩 DM us if you need engine services
02/05/2026
If it has an engine… there’s a good chance we work on it 😏⚙️ From automotive to agricultural industries — we’ve got you covered.
Arkansas’ home for real, precise engine work.
📞 501.372.0985
📍 Little Rock, Arkansas + beyond
📩 DM us if you need engine services
The part everyone relies on, but no one thinks about… until an engine fails.
It works quietly, cycle after cycle, deep inside the engine — taking the load, absorbing the stress, and holding everything together long before any failure is visible from the outside.
When it’s right, you’ll never notice it. When it’s wrong, everything else pays the price.
That’s why we don’t guess.
We measure.
We balance.
We blueprint.
Because real performance isn’t just about horsepower — it’s about consistency, reliability, and the precision behind the details you’ll never see once the engine is sealed. 🔩
Trust the build you can’t see. Riverside Performance Engines. 🔥🤝
01/27/2026
Tear down an engine with us. The work BEFORE the rebuild 🔩➡️
This is where we slow down. We check and measure everything so there are no surprises later. We don’t guess, we don’t rush it, and we don’t hand it off — we take the time to do it right the first time. 👏
Because we do it all — in-house. 💪 From raw parts to finished builds, every step happens right here.
Machining. Measuring. Assembly. Final checks. Handled by the same hands that take pride in the result. This is what “done right” looks like. 🔧⚙️
Click here to claim your Sponsored Listing.
Category
Contact the business
Address
1224 E 28th Street
Little Rock, AR
72206
Opening Hours
| Monday | 7am - 4pm |
| Tuesday | 7am - 4pm |
| Wednesday | 7am - 4pm |
| Thursday | 7am - 4pm |
| Friday | 7am - 4pm |