BUILT with FOAM

Question for the installers who form their own drypack shower floors - Would you use a phone app with the following features?

After entering the perimeter measurements, drain location, and desired perimeter height you'd get the following information;

1- The app tells you if you can have a level perimeter as is.
2- If you can't have a level perimeter you can drag the point drain across your phone screen with your finger until it turns from red to green indicating a level perimeter is now possible.
3- The app tells you the measurements of the new drain location so you can see of there are joists in the way.
4- If you cannot have a level perimeter it tells you how much and where to adjust the perimeter to stay within the required 2% to 4% slope.
5- Tells you how much drypack you need for bonded or unbonded drypack both as bagged or loose sand + cement.
6- Works for both point drains and linear drains.
7- Tells you the minimum perimeter height for curbless showers.

I've already filed for the patent ;)

We're always looking to improve our methods to make your lives easier.

Built With Foam FloFX square flanges with a perfect fit.

Free education courtesy of the NTCA & QEP

⏰ TOMORROW, join Hector Martinez as he discusses QEP’s new GPTP product line. This free webinar will cover:
✨The proper handling and maneuvering of large format tiles using QEP's Gauged Porcelain Tile Panel Solutions
✨Cutting options
✨Proper technique
Register at https://bit.ly/4noHS1j