SysTech Design Inc

As a proud supplier of Donaldson Torit products, we are excited to announce the latest additions to their selection of dust collection equipment! These new designs include the Donaldson DLMC G2 Baghouse Dust Collector, Donaldson 2-Cartridge Downflo Evolution Pre-assembled Dust Collector, and the Donaldson Torit Fume Hood. Visit our blog to learn more about each product.
https://www.systech-design.com/new-dust-collection-products-from-donaldson-torit/

SysTech selects and installs dust collectors for ventilation projects that require 100 CFM to those exceeding 100,000 CFM. Projects might be for product recovery, nuisance dust control, health issue particulate removal, or handling combustible dust.
The accompanying photo is of a recent small but significant zirconium dust collection project where a 500 CFM Donaldson Torit DFO 3-3 cartridge dust collector was applied for product recovery. The unit included an abrasion-resistant inlet, a 25-gallon collection drum, a 5 HP fan, and a VFD control panel.
https://www.systech-design.com/industrial-dust-collection/

During summer, clients usually exhaust heated air accumulating in the upper rafters and high ceilings with a bank of rooftop exhaust fans. During this period, fans are inspected, and the maintenance guys fix issues that need addressing. If not serviced regularly, the rooftop fans go down, and ventilation systems are compromised. It gets hot!

Unfortunately, most roof-mounted fans follow the “out of sight, out of mind” idiom. Unless a fan shuts down, going onto the roof is inconvenient, and servicing fans by disassembly them is often avoided as long as possible.

Installing heavy-duty long-life fans is the first step to extend the interval for hot weather rooftop repairs. And suppose your exhausted airstream is contaminated with particulate that builds up on the fan wheels (which subsequently go out of balance). In that case, the second step is reducing the required time when fan service is necessary.

Should either of these maintenance scenarios ring a bell, consider the Hartzell Air Movement “Swing-out Design” for roof exhausters. These fans are heavy-duty and easily serviced when you need to go up on the roof. The complete drive and fan wheel assemble unlatches from the housing, swings out, and the fan internals are readily serviced and cleaned.

https://www.systech-design.com/industrial-ventilation/industrial-fans-blowers/axial-fans/

Industrial fume extraction arms help capture dust, smoke and fumes. SysTech has more than just multiple arm options. We offer complete exhaust systems packages. These packages can be shipped to a job site and are backed by a remote support application group. The application group either walks clients through the system installation or recommends an installation contractor to complete the project. SysTech arms are often the center point (along with a cartridge dust collector) for complete weld smoke exhaust systems in technical training schools, metalworking shops, and assembly line operations.

https://www.systech-design.com/industrial-ventilation/air-filtration-systems/extraction-arms/

Get ready for summer with SysTech!

Ventilation for large facilities such as warehouses and manufacturing plants are a big concern for management. Opening bays, doors, and windows are not guaranteed to reduce heat loads in a building.

But SysTech is here to help! SysTech combines roof and wall fans to exhaust interior, heated air and bring in fresh, cooler outside air.

The physical location of these fans, as well as other factors, must be evaluated before a design is completed and installation begins.

Learn more here: systech-design.com/industrial-ventilation/ventilation-for-large-industrial-facilities/

On a long-term basis, we offer clients with preventative maintenance packages that assure equipment is operating at peak performance and downtime and crisis situations are minimized.
Contact us today!
(800) 456-9460

At SysTech Design we supply and install dust collection systems which require explosion isolation when handling combustible dust. Explosion isolation flap valves on the inlet and outlet duct are part of most dust collection systems.

Sometimes clients want to duplicate an existing equipment manufacturer and we used BOSS VigiFlap isolation flap valves on a food processing application. We work hard to make sure we always meet our customers’ needs.

Call us now! (800) 456-9460.

Learn more here: https://www.systech-design.com/industrial-ventilation/explosion-protection-systems/explosion-isolation/

Fans are the “heart” of all industrial ventilation systems and these “air movers” are essential for proper building ventilation, heating & cooling of space, process machinery exhaust, pneumatic conveying, and vacuum collection systems. SysTech is experienced in developing industrial noise control solutions for a wide range of industrial environments. Call SysTech to discuss your industrial fan & blower needs.
Contact Us Today! (800) 456-9460

SysTech has the experience and products to achieve regulatory (OSHA) and/or municipal compliance with noise regulations and ordinances.
Contact us today!
(800) 456-9460

Happy Holidays from the SysTech family to yours!

To find the best and most cost-effective noise attenuation approach, we’ll perform a qualitative and quantitative analysis of the problem.
Contact us today!
(800) 456-9460

Downdraft tables and benches are ideal for single-operator dust and fume control applications. The workbenches are mobile and have a self-contained dust filtration system. Custom benches are designed to control the direction of capture airflow based on the size and surface materials of the workpiece as well as the necessary filtration efficiency in removing captured particulate.

Custom Downdraft Tables and Benches - SysTech Design Inc. Facebook Twitter linkedin