CHS Automotive Machine Shop

Engine work starts with getting the vehicle properly set up.

From engine removal and auto repair at 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻 to engine machining and repair at 𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽, every step matters.

𝗧𝘄𝗼 𝘀𝗵𝗼𝗽𝘀. 𝗢𝗻𝗲 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗽𝗿𝗼𝗰𝗲𝘀𝘀.

AutomotiveRepair EngineWork CarRestoration AutomotiveService DaytonaAutoRestoration CHSMachineShop

Small details. Serious results. 🔧

From transmission and electrical service to precision machining and restoration, the right work starts with a careful inspection and ends with confidence on the road.

𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽 × 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻

Built right. Restored right. Done right.

AutoElectrical EngineMachining PrecisionMachining AutomotiveRepair ClassicCars CarRestoration AutomotivePerformance

It comes in. We check it over. Then we get to work.

Daytona Auto Restoration × CHS Machine Shop

From 𝗲𝗻𝗴𝗶𝗻𝗲 𝘀𝗲𝗿𝘃𝗶𝗰𝗲, 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝗶𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻, 𝗮𝗻𝗱 𝗴𝗲𝗻𝗲𝗿𝗮𝗹 𝗮𝘂𝘁𝗼𝗺𝗼𝘁𝗶𝘃𝗲 𝗿𝗲𝗽𝗮𝗶𝗿 𝘁𝗼 𝗲𝗻𝗴𝗶𝗻𝗲 𝗺𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴, 𝗰𝘆𝗹𝗶𝗻𝗱𝗲𝗿 𝗵𝗲𝗮𝗱 𝘄𝗼𝗿𝗸, 𝗰𝗿𝗮𝗻𝗸𝘀𝗵𝗮𝗳𝘁 𝘀𝗲𝗿𝘃𝗶𝗰𝗲𝘀, 𝗮𝗻𝗱 𝗽𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗺𝗲𝗮𝘀𝘂𝗿𝗲𝗺𝗲𝗻𝘁, our shops handle the work from service bay to machine shop.

𝗧𝘄𝗼 𝘀𝗵𝗼𝗽𝘀. 𝗢𝗻𝗲 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱.

MachineShop CylinderHead Crankshaft AutomotiveMachining AutoRestoration PerformanceEngines AutomotiveService

Where does real engine performance begin?

It starts with the right work behind the scenes.

From precision machining and engine building at 𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽 to expert automotive service and restoration at 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻, every component, measurement, and detail matters.

𝗕𝘂𝗶𝗹𝘁 𝘄𝗶𝘁𝗵 𝗽𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻. 𝗙𝗶𝗻𝗶𝘀𝗵𝗲𝗱 𝘄𝗶𝘁𝗵 𝗽𝘂𝗿𝗽𝗼𝘀𝗲.

🔧 Engine Machining
⚙️ Performance Engine Building
🛠️ Engine & Auto Service
🚗 Restoration & Repair

𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽 × 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻

EngineMachining AutoRestoration AutomotiveRepair MachineShop EnginePerformance Automotive CarRestoration BuiltNotBought BuiltToPerform

A clean component is the starting point for a proper rebuild.

Here, we're removing surface buildup and burrs to prepare the component for inspection and assembly.

At 𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽, the process includes cleaning, preparation, measurement, machining, and engine rebuilding.

And when the vehicle moves beyond the machine shop, 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻 handles the electrical, diagnostics, repairs, and service work.

CHS Machine Shop × Daytona Auto Restoration

Machining • Engine Rebuilds • Performance
Electrical • Diagnostics • Repairs

EngineMachining AutoRestoration AutomotiveRepair

Line boring an engine block starts with proper inspection, setup, and measurement.

CHS Machine Shop handles engine block machining, crankshaft work, cylinder heads, connecting rods, engine assembly, resurfacing, specialty repair, and testing.

Daytona Auto Restoration handles the vehicle side, including engine service, transmission, exhaust, electrical, A/C, and maintenance.

𝗡𝗲𝗲𝗱 𝗺𝗮𝗰𝗵𝗶𝗻𝗲 𝘄𝗼𝗿𝗸 𝗼𝗿 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝘀𝗲𝗿𝘃𝗶𝗰𝗲? 𝗚𝗲𝘁 𝗶𝗻 𝘁𝗼𝘂𝗰𝗵 𝘄𝗶𝘁𝗵 𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽 𝗼𝗿 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻.

CylinderHeads Crankshaft AutomotiveMachining EngineBuild AutoRestoration DaytonaAutoRestoration CHSMachineShop

𝗪𝗵𝗮𝘁’𝘀 𝗵𝗮𝗽𝗽𝗲𝗻𝗶𝗻𝗴:
A crankshaft journal is being precisely ground and checked for proper size and runout.

𝗪𝗵𝘆 𝘄𝗲 𝗱𝗼 𝗶𝘁:
Accurate journal dimensions and proper runout are critical for correct bearing clearance, smooth rotation, and reliable engine operation.

CHS Machine Shop provides 𝗰𝗿𝗮𝗻𝗸𝘀𝗵𝗮𝗳𝘁 𝗴𝗿𝗶𝗻𝗱𝗶𝗻𝗴, 𝗺𝗲𝗮𝘀𝘂𝗿𝗲𝗺𝗲𝗻𝘁, 𝗶𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻, 𝗮𝗻𝗱 𝗲𝗻𝗴𝗶𝗻𝗲 𝗺𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝘀𝗲𝗿𝘃𝗶𝗰𝗲𝘀 to restore components to specification.

CHS Machine Shop × Daytona Auto Restoration

𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻 𝗳𝗶𝗿𝘀𝘁. 𝗧𝗲𝗮𝗿𝗱𝗼𝘄𝗻 𝘀𝗲𝗰𝗼𝗻𝗱.

Getting underneath, checking the components, breaking loose the hardware, and working through the exhaust system step by step.

No shortcuts. Just proper access, inspection, and teardown.

𝗖𝗛𝗦 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗦𝗵𝗼𝗽 × 𝗗𝗮𝘆𝘁𝗼𝗻𝗮 𝗔𝘂𝘁𝗼 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻

Undercarriage AutomotiveRepair ClassicCars AutoShop Machinist AutomotiveRestoration

A connecting rod can look perfectly fine and still have a big-end bore that needs attention.

Connecting rod reconditioning starts with inspection and measurement, followed by resizing, honing, and final verification of the bore.

𝗠𝗲𝗮𝘀𝘂𝗿𝗲 𝗶𝘁. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗶𝘁. 𝗛𝗼𝗻𝗲 𝗶𝘁. 𝗠𝗲𝗮𝘀𝘂𝗿𝗲 𝗶𝘁 𝗮𝗴𝗮𝗶𝗻.

That’s the work behind getting a connecting rod back to specification.