Future Design Controls

Need powerful performance at a price that doesn’t hurt?

The 300 Series include 3 Inputs as standard and up to 4 control outputs plus communications to meet a variety or temperature & process control requirements with a standard 3-year Warranty.

Configure P/N:
https://store.futuredesigncontrols.com/Product/s/pRvvAZ/300-Series-High-Performance-Single-Loop-Controls?active=Configure

Landing Page:
https://www.futuredesigncontrols.com/300.htm

Your input matters! Check out some of the new features that are now standard because of what our customers asked to be added.

Reach out to let us know what YOU need in your application.
[email protected]

Making your life easier! The R22's ease of installation and small form factor make it a must. Hundreds in stock and ready to ship!

https://www.futuredesigncontrols.com/C-Series.htm

Give us a shout to learn more about the PR Series from Future Design Controls

[email protected]



https://www.futuredesigncontrols.com/PR_Series_Paperless_Recorders.htm

Future Design Controls has released a PC Configurator for the MCT Series.

The program replicates the look and feel of the configuration mode on the MCT and allows users to build new configurations, edit existing ones as well as the creation and editing of Ramp / Soak Profiles.

This tool is free to download and can be found on the website under Resources > Software Downloads > MCTA PC CONFIG UTILITY RELEASE V1.0.0

“If it works it's obsolete” – Marshall McLuhan

At Future Design Controls, development is never complete!

We strive to listen carefully to our customers and work towards product development that best fits their application requirements.
Send us your ‘Wish List’ of functions and we will take a look. ([email protected])

Below you can learn about some of the recent additions that are now standard in the MCT4.

PC-Based Configurator
Easy-to-Use
Same Layout as on the MCT4
· Build new configurations and export
· Export configurations and edit on PC
· Build & Edit Ramp/Soak Programs


Scheduled Program Start
Start a Ramp/Soak Profile at a specified date & time
· Load Profile to Run
· Choose the T.O.D. Option
· Select Date & Time to Run
· Press Start
· Choose Step to Start (Default Step1)
· Program Status will Display with TOD Shown

Setpoint Ramp Rate
Single Set Point Ramping for Loops
· Ramp in units per minute
· Ramp in units per hour


Setpoint 2 w/ Event Input
Enabled in Loop Configurations (via EI)

Settings:
ACTUAL: Setpoint 2 will be used as the loop SP, overriding current SP or program SP.

DEVIATION: Setpoint 2 will be an offset to the current loop SP.


Countdown Timer w/ Event Output
Enable this function in the OEM Configuration
· Icon Displays at Top Right Corner of Home Screen
· Coincides with Event 1 Option
· Tap Icon & Enter Desired Cycle Time
· Press Start and Event Output 1 Turns On
· Once Time Completes, Even Output Turns Off

https://youtu.be/9YZfrVVfe8k

Online Store - Future Design Controls https://store.futuredesigncontrols.comFuture design controls has released an online store for the convenience of our customers.The store includes a product c...