Pick 2 Performance & Racing LLC

He did it!!! 🎉
1st place overall in his first race season!

We couldn’t be prouder of this little dude and his crew of buddies who’ve been showing up and putting in the work.

He’d like to give a special shoutout to his sponsors:
• Mom & Dad (💸😆)
• for keeping his race bike running flawlessly!

Making some headway on this TA Aluminum block today.

I have been getting the suspension and brakes dialed in on this C5Z. I installed Pfadt poly control arm bushings, QA1 coilovers and Wilwood Aero 6 brakes.

I am just getting started with messing around with some Turbo Buick configuration files for the Holley pro dash. I did not create these files, I am just modifying them for a car build I am currently working on.

I searched the Internet for a Holley pro dash bench harness. I couldn't find one, so I made one myself for loading configurations before installing into the car. Also, I finished up today by doing some maintenance on a 2nd gen Viper.

I finished up Goodguys Autocross Lone Star Nationals by winning 1st place for the sports car class! It sure wasn't easy to keep the #1 spot for 2 days. This car is a workhorse and I couldn't be happier! I have taken some second and third place finishes before, but this one was earned!
Also, Camden got his first taste of Nitro while we were there!

I got a couple of videos edited from LS Fest East 2025. 3S Challenge and Autocross from NCM Motorsports Park.

A few photos from LS Fest east 2025. We ran both cars in the Grand Champion class which included 4 days of racing, including drag racing, 2 days of autocross and 3S challenge. Both cars ran all events without a hiccup! It was a blast and I am already looking forward to the next event!

I ran into a problem lately where a Holley Terminator X Max ECU lost its 5V reference which provides voltage for oil, fuel, map, and tps sensors. Luckily the car still ran, poorly though and I was able to chase it down to the ECU being the culprit. I installed a new ECU flashed in the old tune and the car fired right up. I have heard of failed ecu's but this is the first one I have seen.

I just finished up installing a cam package on this LS swapped C3 Corvette. I pulled the engine and gave it the full treatment with new lifters, trays, one piece pushrods, springs, seals and a rocker trunnion upgrade. Then finished up by tuning the Holley Terminator X EFI.