Alpine Panelbeaters Ltd

Hi Everyone, we are looking for the following to join our team.
ADDITIONAL PANELBEATER/FABRICATOR NEEDED FOR AVONDALE WORKSHOP
Are you looking for work or a job with flexible working hours? We are looking for another experienced fabricator/panelbe**er to join the team! We mainly specialize in Pre 1990 vehicles.
The Role
- Carry out structural repairs to a high standard. All structural repairs and welding to be carried out according to manufacturer's specifications and industry standards
- Metal Fabrication- making up of patch panels
-Welding of patch panels and body panels and other small repairs.
- Apply Rust treatment and under seal
-General refinishing work
-Assembly work
Ideally you will have a current I- Car welding Certificate or similar is an advantage
-Proven experience as a panelbe**er/ metal fabrication
-Strong knowledge of structural repair techniques
-Excellent attention to detail and commitment to quality
If you are passionate about older vehicles and have the skills call us for a chat. Phone Mark on 09 820 2299

Something new is operating out our factory space for all you open wheel dirt races 😉

Hi Everyone, due to increased work we are looking for the following to join our team.

ADDITIONAL PANELBEATER/FABRICATOR NEEDED FOR AVONDALE WORKSHOP

Are you looking for work or a job with flexible working hours? We are looking for another experienced fabricator/panelbe**er to join the team! We mainly specialize in Pre 1990 vehicles.

The Role
- Carry out structural repairs to a high standard. All structural repairs and welding to be carried out according to manufacturer's specifications and industry standards
- Metal Fabrication- making up of patch panels
-Welding of patch panels and body panels and other small repairs.
- Apply Rust treatment and under seal
-General refinishing work
-Assembly work

Ideally you will have a current I- Car welding Certificate or similar is an advantage
-Proven experience as a panelbe**er/ metal fabrication
-Strong knowledge of structural repair techniques
-Excellent attention to detail and commitment to quality
If you are passionate about older vehicles and have the skills call us for a chat. Phone Mark on 09 820 2299

Long Established West Auckland panel shop is looking for an experienced fabricator/panel be**er to join the team. Flexible hours available.

THE ROLE
- Carry out structural repairs to a high standard. All structural repairs and welding to be carried out according to manufacturer's specification and industry standards.
-Metal fabrication- making up of patch panels
-Welding of patch panels and body panels and other small rust repairs
-Apply rust treatment and under seal
- General refinishing work
- Reassembly work

MUST HAVE:
-Current I-Car welding certificate or similar welding cert
-Proven experience as a panel be**er/metal fabrication
-Strong knowledge of structural repair techniques
-Excellent attention to detail and commitment to high quality
-Great communication skills
-Eligible to work in New Zealand

If you are passionate about older vehicles and have the skills listed send through your CV.
Email [email protected]

SOLD We have a Used English Wheeling Machine for sale. Model EWM 71 . Good working condition selling as is a spare and no longer have the space . Great machines we used these in our Metal Shaping Courses. See attached photos. Sale price $600 inc GST. Pick up is required. Message me or send an email to [email protected] if you are interested.

SOLD GONE TO A GOOD HOME👍
Wooden beams as used in the metal room training courses, no longer needed they are 1400 long $50 each
Pickup 8/2 Lansford Crescent Avondale

UPDATE:
Announcing the re-branding of Western Machinery as TradeZone Avondale.
Come along to meet the team, check out our product range and grab a bite to eat from the BBQ.
We look forward to seeing you at 6 Fremlin Place, Avondale
Wednesday 8th February 7.30am to 9.30am

Insurance Job Repair and Paint- 1925 Delage

Recently we have completed repairs and paint on the bonnet tops and sides damaged by a fire in the engine bay The bonnet needed to be separated into 4 pieces, stripped down to bare metal for the repairs. The Bonnet tops were distorted by the heat and required some straightening out, before finishing work and paint work. Some before and after photos.

Stock clearance!

See our Trade Me listing for the last 3 piece set of round leather sand bags- sand filled.

Cheers Mark.

ROUND LEATHER BAGS- SANDFILLED | Trade Me Motors SET OF 3 ROUND LEATHER BAGS; 0150mm, 0254mm, 0356mm Thick grain leather bag prefilled with sand.

ENGLISH WHEELING MACHINE- THIS HAS BEEN SOLD!

We have a used English Wheel EMW-71 to sell. This was used in our Metal shaping courses and is no longer needed. In good used condition. See photos.
You will have to be able to pick up from our Shop, due to the weight and size. Sell price $480 including GST. If you are interested please send me a message or email to [email protected]. Cheers Mark.

Purchased from the Machinery House description below:

1 x EWM-71 - English Wheel
1.2mm Mild Steel Capacity
710mm Throat Depth
Overview
The EWM-71 English wheel is designed to allow craftsmen to form smooth curves from flat sheets of metal. They are mainly used in car, motorcycle, aviation and racing car construction or restoration where sheet metal panels need to have compound curves formed.

The operator passes the sheet metal between the anvil wheel and the rolling wheel. This process stretches the material and causes it to become thinner. As the material stretches, it forms a convex surface over the anvil wheel.

This heavy duty steel fabricated machine has a large 710mm throat which allows a capacity of 1.2mm for mild steel and 1.6mm for Copper and Aluminium.

Supplied with a 203mm diameter x 50mm wide top rolling wheel and 50, 76, 101, 152, 203, 254mm radius dies & 1 x flat die.

The machine weighs 62kg and has provisions to be easily secured to floor.
Features
• 710mm throat capacity
• Mild steel capacity 1.2mm
• Copper & Aluminum capacity 1.6mm
• Top anvil Ø203 x 50mm
• Includes 50, 76, 101, 152, 203, 254mm radius dies & 1 x flat die
• All dies are heat treated to minimise wear