Penn Autos / Andy Frost Racing Transmissions

The yellow Vauxhall has now gone back to it's happy customer.
We got Pro Street UK to deliver it back to him, and they made a fantastic job of that.
We highly recommend them for any covered transport you need in the UK.
Give them a shout and tell them we told you to call....

It's been a while since we posted on here, but that is because we are always busy with work!
Amongst all the other normal work we get plenty of classics in for various work, and a lot of it is major work. We don't just do transmissions on the classics. Engine work, carb and ignition tuning, exhausts, brakes and plenty more.
Here's a couple of the ones we had to do work on. The Buick is the one we had a couple of years back, this time for complete heads refurbished, and fit an Aldan suspension system and new wheels. As before the customer drove the car home (in biblical rain) but was very happy with how it now performed.
The Galaxie was in for a trans overhaul, and he drove home happy too.
The Vauxhall needed a lot of small and large jobs, like engine/trans out and cure engine oil leaks, new ignition system and carb, new fuel system from tank to carb, wiring, exhaust and suspension work. That is almost ready to go back to the customer after it has an MOT.
Have a good weekend folks.

Christmas is almost upon us, so we would like to take the opportunity to thank our customers past and present for their continued support, and hope that you all have a merry xmas with your friends and loved ones, and wishing you all the best for the new year.
See you in 2026!

As i've said before (on the Buick post) we haven't got the room at work to do major welding jobs anymore. This neat little Honda Type R came in and failed the MOT on the inner sills (amongst other things..) and the owner wanted it to be done properly.
So we hooked up with Clifton Rain Limited to do this job properly for us. They didn't disappoint! They kept us up to date with pictures and tried to keep within the budget discussed at the beginning, but as there was more work than anticipated it went over a little, but not much considering the extra work done.
We found them very professional in all aspects and would recommend them if you want a job done correctly, whether it's a repair, or full blown fabrication/restoration.
These guys have deep roots in Hot rodding and as such can undertake pretty much most fabrication jobs.
If you need some fab work give them a call and tell them Penn Autos sent you....

For sale.
Gear vendors overdrive with TH400 adaptor. Fits the popular short shaft (not the 4wd one). Has done a couple of 100 miles from new, and 8 passes down the track in a Supra.
Get yourself the best overdrive you can buy for a paltry £1600 ono plus delivery. Can deliver to UK and Europe but anywhere else will be expensive. Leave me a message on here if you are interested.
Note: please don't waste my time if you don't want it. Genuine buyers only...

Sorry for anyone who had a message from a woman on their review/message to us. Unless it's me personally who replies then please ignore it and report the offending person.

Sometimes a job comes in for a couple of things and then you find it requires major surgery after someone bodged it badly.
This is one of these jobs. Pics below.
PS, don't call me to do this type of work! I'm just showing you that i can fabricate, but i have no desire to do this amount of fabbing. I have enough on RV1 to last a lifetime!

It's been a massively busy 2023 at Penn Autos with 100's of jobs successfully undertaken. With that said all the staff are taking a well deserved break from today.
Which leaves us to wish all of our customers past, present and future a merry xmas and a wonderful new year celebration.
See you in 2024!
Frosty.

The C2 Corvette we did lots of work on last year is up for sale. The owner is looking for £85k for the car. It is a superb example of the marque. 327ci small block Chevy, TH350 trans, Wilwood vented discs and 4 pot calipers on the front, interior reworked. Top notch inside and out.
Contact us on here, or at the shop for info.

Another vehicle ready for the drive home! The car came in on 5 cylinders and with 1st gear only! It also came with dual quads, and whilst they look great, when they are 60 years old they don't work so great.
So not only did it have a trans/converter overhaul, inc making the kickdown work (important), it also had a new air to oil trans cooler, radiator upgrade and a new single spreadbore carb that not only makes the engine work as it should, it allows a modicum of mpg when at light throttle. Of course when those big secondaries come on it uses a lot more fuel, but goes as well as it probably ever did!
I'm looking forward to the surprise on the owners face when i give the ole nailhead a bit of throttle on the test drive......