OMEGA Tech Store

RFID Arduino Kit
--------------------------------------------------------------------
RFID Learning Suite is the entry to the master suite upgrades, updates place mainly in:
1.1602 I2C 1602 replaced the screen to control it more convenient,
2.New RFID module and RFID keychain and white card,
3. Added DS1302 clock module,
4. New of the sound detection module,
5.New temperature and humidity module,
6. New water level detection module,
7. Added 4 * 4 keypad module
8. New of 8 * 8 dot matrix module
Package Included:
1 X UNO Board
1 X USB Cable
1 X Jump Cable
1 X Breadboard
5 X LED Light
1 Pack Resistor
1 X Female to male dupond line
1 X Potentiometer
1 X Buzzer
1 X 74HC595
1 X Infrared receiver
1 X LM35
1 X Flame Sensor
1 X Ball Switch
1 X Photoresistor
1 X Key button
1 X Remote control
1 X 4-digit display tube
1 X 8*8 Dot matrix module
1 X 1-digit display tube
1 X Stepper motor driver board
1 X Stepper motor1 X Stepper motor
1 X 9g Servo
1 X IIC 1602 LCD
1 X XY joystick module
1 X Temperature module
1 X Water test module
1 X RFID Module
1 X RFID keychain
1 X RFID White card
1 X Sound Module
1 X Relay Module
1 X Clock Module
1 X 4*4 Key board
1 X RGB 3 color module
1 X 9V battery Snap
--------------------------------------------
السعر:
7500 DA
--------------------
خدمة التوصيل الى جميع الولايات متوفرة
----------------------------
0663807362

GAOMON M10K Graphic Tablet for Drawing/Art Digital/Architecture/Engineering Student with 8192 Levels

Description:
PASSIVE PEN--A battery-free stylus which adopts the most advanced passive technology at present.This environment-friendly pen is economical but also high-end, can be used directly without battery or charging, avoiding battery leakage and low power. Made of matte plastic and tapers gradually from the tip to the top. Easily grip and will not go out of your hand while drawing.

8192 LEVEL PEN PRESSURE--With 8192 high levels pressure sensitivity, it provides more accurate and responsive pen-cursor movement, makes your drawing smooth and natural line.

EXPRESS KEYS--1 Touch Ring (zoom in/out and roll)+1 Round Key(shift zoom and roll)+10 Express Keys(could be set into any shortcuts that you want).ACTIVE AREA -10*6.25 inches, optimum size for painting, handwriting, playing games and animation design. Aspect ratio is 16:9, matching the most of monitors. High-level Parameter-Report Rate: 250 PPS; Resolution: 5080LPI; Pen Reading Height: 10mm.
LEFT/RIGHT HAND MODEL)--Support the left/right hand model on driver.

easy to shift modes in GAOMON driver. Please remember to make the tablet upside down after changing model.
OS SUPPORT--Windows 7/8/8.1/10, MAC10.10 or later. PAINT SOFTWARE SUPPORT--Photoshop CC,Krita, Illustrator CC,SAI2,Illustrator CS4, SketchBookPro, FireAlpaca, OpenCanvas6, Manga Studio and so on.

السعر: 25000دج
0663 80 73 62
توفر خدمة التوصيل الى جميع الولايات

RFID Arduino Kit
--------------------------------------------------------------------
RFID Learning Suite is the entry to the master suite upgrades, updates place mainly in:

1.1602 I2C 1602 replaced the screen to control it more convenient,
2.New RFID module and RFID keychain and white card,
3. Added DS1302 clock module,
4. New of the sound detection module,
5.New temperature and humidity module,
6. New water level detection module,
7. Added 4 * 4 keypad module
8. New of 8 * 8 dot matrix module

Package Included:
1 X UNO Board
1 X USB Cable
1 X Jump Cable
1 X Breadboard
5 X LED Light
1 Pack Resistor
1 X Female to male dupond line
1 X Potentiometer
1 X Buzzer
1 X 74HC595
1 X Infrared receiver
1 X LM35
1 X Flame Sensor
1 X Ball Switch
1 X Photoresistor
1 X Key button
1 X Remote control
1 X 4-digit display tube
1 X 8*8 Dot matrix module
1 X 1-digit display tube
1 X Stepper motor driver board
1 X Stepper motor1 X Stepper motor
1 X 9g Servo
1 X IIC 1602 LCD
1 X XY joystick module
1 X Temperature module
1 X Water test module
1 X RFID Module
1 X RFID keychain
1 X RFID White card
1 X Sound Module
1 X Relay Module
1 X Clock Module
1 X 4*4 Key board
1 X RGB 3 color module
1 X 9V battery Snap
--------------------------------------------

السعر:
7500 DA
--------------------
خدمة التوصيل الى جميع الولايات متوفرة
----------------------------
0663807362

09/10/2023
بعض من الالكترونيات المتوفرة حاليا مع إمكانية توفير الكترونيات أخرى حسب الطلب
0663807362
إمكانية التوصيل إلى جميع الولايات

Voltage Sensor Module
is a precise low-cost sensor for measuring voltage. It is based on the principle of resistive voltage divider design.

Voltage Detection Sensor Module Features & Specifications
- Input Voltage: 0 to 25V
- Voltage Detection Range: 0.02445 to 25
- Analog Voltage Resolution: 0.00489V
- Needs no external components
- Easy to use with Microcontrollers
- Small, cheap and easily available
- Dimensions: 4 × 3 × 2 cm

السعر = 200 دج
توفر خدمة التوصيل الى جميع الولايات مع امكانية الدفع عند الاستلام
0663807362

Hall Water Flow Sensor Flowmeter Water Control 1-30L/min 2.0MPa
Description:
This product mainly used for water testing, water cooling system
High amplitude ≥ 4.6V
Low amplitude ≤ 0.5V
Electric strength 1250V/min
Insulation resistance ≥ 100MΩ
Hydrostatic pressure testing ≤ 2.0Mpa
Application:
Water heaters, credit card machines, water vending machine, flow measurement device.

السعر = 1300 دج

0663807362
التوصيل الى جميع الولايات مع الدفع عند الاستلام

Infrared Wireless Remote Control Receiver Module Kit for Arduino High quality
Features:
100% Brand new and high quality! Ideal for Arduino DIY project 17-key IR remote control(1*CR2025 battery, included) Infrared remote control receiving module can receive standard 38 KHZ modulation signals, by means of programming for Arduino, the remote control signal decoding operation can be realized, which can produce all kinds of remote control robots and interactive work.
Specifications:
Battery:1*CR2025 Button batteries (Included)
Color: Black
Size:87*40mm
Package Includes:
1 x Wireless controller
1 x IR sensor
1 x set wires

السعر = 400 دج

0663807362
التوصيل متوفر الى جميع الولايات

High Sensitivity Sound Microphone Sensor Detection Module
Specifications:
Size: 32mm*17mm*8mm(length*width*height)
Main chip: LM393, Electret condenser microphone
Working voltage: DC 4-6V
Signal output indication
Single channel signal output
The output effective signal is low level
When there is sound, outputs low level and the signal light
Can be used for Acoustic control light , give sound and light alarm working with Photosensitive sensor ,and sound control, sound detect Circuit board output switch quantity
Note: The Maximum induction distance is 0.5M

السعر = 250 دج

0663807362
0793996353
امكانية التوصيل الى جميع الولايات مع الدفع عند الاستلام

DS18B20 Stainless steel waterproof 18b20 cable temperature probe temperature sensor
Pluggable terminal waterproof DS18B20 temperature sensor can be used in many places, such as soil temperature detection, hot water tank temperature control, waterproof DS18B20 temperature sensor must also be connected to a pull-up resistor can be used, for which we designed the converter to send use.
Specifications:
Temperature sensor supply voltage: 3.0V ~ 5.5V
Temperature sensor resolution: 9 to 12 adjustable resolution
Temperature range: -55 ~ +125 ° (lead can only withstand the highest temperature of 85 degrees)
Temperature Sensor Output Lead: Yellow (DATA) Red (VCC) and Black (GND)
Adapter Cables: DATA, VCC, BLK,
Suitable platform: for Arduino and Raspberry Pi

السعر = 900 دج/ 2متر
السعر = 750 دج/ 1متر

0663807362
امكانية التوصيل الى جميع الولايات مع الدفع عند الاستلام

DHT-11 Digital Temperature and Humidity Temperature Sensor
The DHT11 digital temperature and humidity sensor is a temperature and humidity composite sensor with a calibrated digital signal output. It uses dedicated digital module acquisition technology and temperature and humidity sensing technology to ensure high reliability and excellent long-term stability. The sensor consists of a resistive wet sensor and an NTC temperature sensor connected to a high performance 8-bit microcontroller. Therefore, the product has the advantages of excellent quality, ultra-fast response, strong anti-interference ability and high cost performance. Each DHT11 sensor is calibrated in an extremely accurate humidity calibration chamber. The calibration coefficients are stored in the OTP memory as a program, and these calibration coefficients are called internally during the processing of the detection signal. The single-wire serial interface makes system integration easy and fast. Ultra-small size, extremely low power consumption, and signal transmission distances of up to 20 meters make it the best choice for even the most demanding applications. The product is available in a 4-pin single-row lead package.
Product Features:
Relative humidity and temperature measurement
All calibration, digital output
Excellent long-term stability
No extra parts required
Extra long signal transmission distance
Ultra low energy consumption
4-pin mounting
Completely interchangeable

السعر = 550 دج

0663807362
امكانية التوصيل الى جميع الولايات مع الدفع عند الاستلام