ENCY Software

From digital geometry to a 21-foot public sculpture.

INFINITY, a landmark sculpture by Volkan Alkanoglu, was fabricated by BEK Milling Solution using robotic milling, EPS machining, fiberglass craftsmanship, and ENCY Robot.

For a sculpture this complex, the challenge was not just scale.

It was control.

→ preserve the artist’s digital geometry
→ generate robotic toolpaths
→ simulate robot motion before production
→ reduce uncertainty on the shop floor
→ support accurate large-scale fabrication

Robotic milling created the precise foundation.
Human craftsmanship brought the final surface, structure, and finish to life.

A workflow where software, robot, material, and craft work together.

📎 Contributor: BEK Milling Solution

👉 Read the full case: encycam.com

In ENCY Hyper, the on-screen robot is not just an animation.

As Ilnar Galiullin explains, ENCY Hyper reads the real robot’s joint angles in real time and renders what the robot is actually doing — measured from the machine, not simply predicted by software.

Why does this matter?

→ Programming by demonstration
For tasks like machine tending, the operator can physically show the robot where to pick parts and how to place them.

→ Safety and control
If the real robot and the digital twin start to disagree, ENCY Hyper can detect that something is wrong and stop the robot before it makes an incorrect move.

A digital twin should not only simulate reality.
It should stay connected to it.

📎 Contributor: Ilnar Galiullin, Senior Software Developer at ENCY

Manual painting is hard to keep consistent.

At FEIMEC 2026, COMAC demonstrated a collaborative robot painting workflow — precise, repeatable, and easier on the operator.

With ENCY Robot, painting automation can be prepared before ex*****on:

→ toolpath calculation
→ full robotic cell simulation
→ collision and reach-zone checks
→ robot kinematics control
→ painting process testing on PC

Less manual strain.
Less waste.
More consistent results.

What is your biggest challenge in industrial painting today?

📎 Contributor: ,

This project shows a different side of industrial robot programming.

In Peru, MECANOS AUTOMATION S.A.C. used ENCY Robot to generate contour trajectories for a Yaskawa GP12 robot, recreating the portrait of Miguel Grau.

The value here is not only the visual result.
It shows how offline robot programming can be applied to complex contour-based motion with better control before ex*****on.

With ENCY Robot, users can manage:

• contour toolpath generation
• robot kinematics
• full robotic cell simulation
• collision and reach-zone verification
• postprocessing and control program check

A creative application — built on the same workflow principles used in industrial robotic machining, cutting, welding, polishing, and sculpture/stone applications.

📎 Contributor: MECANOS AUTOMATION S.A.C.

Complex parts are not only about cutting time.

This EN AW-7075 workpiece — 100 × 275 × 305 mm — requires a multi-operation workflow: first-side machining, fixture positioning, and roughing from the next setup.

For jobs like this, CAM workflow control becomes critical.

With ENCY, manufacturers can manage:

• machine-aware toolpath calculation
• stock tracking between operations
• simulation before machining
• 3+2 and 5-axis strategies for complex geometry

The current production time, including fixture preparation, is around 50 hours — a good reminder that precision machining starts long before the first cut.

📎 Contributor:

The ENCY 3.0 premiere will take place at ENCY World Conference 2026 in Limassol, Cyprus.

The official launch will follow at IMTS 2026 in Chicago.

See you at ENCY World Conference 2026 — register now:
https://encycam.com/ency-world-2026/

ENCY World Conference 2026 will be intense, inspiring, and — as always — very human.

And here’s a funny coincidence:

both ENCY and Sting are going 3.0 this year.

The ENCY 3.0 premiere will take place at ENCY World 2026 in Cyprus — and the official launch will follow at IMTS 2026 in Chicago.

▶️ Don’t miss ENCY World Conference 2026 in Cyprus — register now:
https://encycam.com/ency-world-2026/

ENCY World Conference 2026 now has a new ticket category: Digital Insider Pass.

Can’t join us in Cyprus in person?
You can still stay close to the key moments.

The pass gives you access to:

→ key session recordings
→ selected presentations
→ private Zoom with ENCY leadership
→ and more digital materials from the conference

A new way to be part of ENCY World — from anywhere.

▶️ Don’t miss ENCY World Conference 2026 in Cyprus — register now:
https://encycam.com/ency-world-2026/

For those who want to go even deeper — Day 5 of ENCY World Conference 2026 offers an exclusive visit to our R&D center in Paphos.

A chance to see where ENCY ideas, technologies, and future developments are built.

▶️ Don’t miss ENCY World Conference 2026 in Cyprus — register now:
https://encycam.com/ency-world-2026/