CNC Routing CAPE TOWN

A Wall concrete casting Name Mould done end dusted for
Talbot Developments
Project for a Centre in Muizenberg

Another First

An intricate spice rack made from just 3 pieces of ACM (Aluminum Composite Material)

It took time to design and do it "FISRT TIME RIGHT"

Skorsie Kerwer
Proto Tipe no. 1

We see people like to compare
CNC Routing vs Laser Cutting
on Closed Cell Foam
You can clearly see in the photo that you can pocket out with a CNC Router.
Therefor you can achieve a cleaner and neater finish that can be cisible if you compare the pictures
With a Laser you can only cut through, Laminate layers afterwards and can not Pocket out an area

Bridge Concrete stencils
Used for bridge Numbering that is casted into the bridge structure

RECEPTION DESK out of Birch PLY

Home Buyer: I want a house built after 1980.
Me: Actually, you don't.
Let me explain.
Newer isn't always better, and this picture sums it up pretty well. The quality of modern lumber is simply far inferior to the quality of lumber they were using to build homes in the early and mid-20th century. Wood quality began dropping on a serious scale in the 1980s due to old-growth timber being almost completely depleted.
Most wood used today is grown very fast - not only can you visibly see the difference in quality, but the newer lumber is more prone to rotting due to a lack of heartwood. Slow growth wood yields much more heartwood, which is the longest lasting part of the tree, whereas sap wood (new growth wood) will rot very quickly. Modern lumber is also a lot more prone to termite damage as it is softer and easier to consume whereas old lumber is extremely resinous and naturally termite resistant. A good rule - as long as the plumbing and electric has been updated, a well-built home from the mid-20th century is a better investment and will likely outlast a newer build.
Clarification: Yes, these two pieces of lumber come from two different trees. The expert in the attached article is not comparing the lumber of the same tree over time. He is comparing the lumber that was commonly used to build houses 75 years ago versus the lumber commonly used to build houses today