Snow Performance

For legal reasons, we're talking about water-methanol.

For performance reasons, you already knew that.

Snow Performance tees are available now!

Cooler, denser air starts with better nozzle placement.

The Snow Performance Throttle Body Spacer Injection Plate gives your 3.5L EcoBoost F-150 a clean, secure way to mount up to 2 Hyper-Sonic water-methanol nozzles directly between the throttle body and the intake manifold.

Designed for easy fitment and proper nozzle positioning, this plate includes the injection plate, O-ring seal, required installation hardware, and fitment instructions for the Ford F-150 3.5L EcoBoost.

Cool the charge. Clean up the install. Put your nozzles exactly where they need to be.

The Snow Performance V-Band Water/Meth Ring mounts in-line with your cold-side charge piping using V-band-style couplers, giving you a clean and secure way to add water/meth injection without drilling into your existing piping. Each billet aluminum ring features four 1/8" NPT ports spaced every 90 degrees, giving you flexible nozzle placement for your setup.

Available in 2.5", 3", 3.5", and 4".

Upgrade your charge pipe setup with Snow Performance.

Your boosted HEMI deserves cooler, denser air and smarter fuel support.

The Snow Performance Stage 2.5 Water-Methanol Injection System is engineered specifically for forced-induction Dodge Challenger and Charger 5.7L, 6.1L, and 6.4L applications, giving your setup the cooling, control, and octane support needed to make power more efficiently.

Featuring a custom throttle body spacer injection plate, braided stainless line, 4AN fittings, dual hypersonic nozzles, and Snow’s 300 PSI UHO pump, this system is built for clean installation and reliable delivery.

The included VC-50 controller works as both a 52mm boost gauge and progressive water-methanol controller, adjusting injection based on boost pressure while displaying boost, injection percentage, low level, prime function, second-stage activation, and fault codes directly on the 7-color OLED screen.

Cooler air. Better control. More confidence under boost.

Upgrade your forced-induction HEMI with Snow Performance.

Add +50-70 HP while helping keep intake air temps under control.

Snow Performance Universal Stage 2.5 Boost Cooler is built for turbocharged and supercharged applications that need more than a basic on/off water-methanol system. Using the VC-50 progressive controller, the system increases water-methanol delivery as boost pressure rises, giving your engine the cooling and octane support it needs when it's working the hardest.

With intake air temperature reductions of up to 100°F and up to 25 points of octane improvement with proper tuning, the SNO-210 is a proven upgrade for making more power, improving consistency, and adding control under boost.

Upgrade your boosted setup with the Snow Performance SNO-210 Stage 2.5 Boost Cooler.

Behind every flag is a story of service, courage, and sacrifice.

This Memorial Day, we remember the heroes who gave everything for this country and honor the legacy they left behind.

With gratitude and respect, we will be closed on Monday, the 25th.

The Snow Performance Stage 3 Boost Cooler uses both boost pressure and fuel injector pulse width to build a true two-dimensional water-methanol injection map. Instead of relying solely on boost, the controller can adjust delivery based on how hard the engine is actually working, giving forced-induction EFI setups more accurate fluid control across a wider range.

That means cooler intake temps, increased octane, lower EGTs, and more consistent performance when the engine needs it most. The controller also mounts cleanly on the steering column or dash and functions as a boost gauge, water-meth controller, and fuel system monitor in one.

Up to 100°F intake temp reduction. Up to 25 points of octane increase. Smarter control for serious boosted setups.

When Power Matters, Trust Snow Performance.

Know when your water-methanol supply is getting low before it becomes a problem.

The Snow Performance Low Level Sensor is designed to work with any water-methanol reservoir and alerts you from inside the cab when the fluid level drops too low. It includes a voltage-based tank level switch, sealing grommet, yellow LED, and instructions for a clean install.

A simple upgrade that adds confidence, protection, and awareness to any water-methanol system.

When Power Matters, Trust Snow Performance.

Cooler air. More octane. Better control under boost.

The Snow Performance Stage 2.5 Water-Methanol System is built for forced-induction 2014+ Corvette and 2016+ Camaro 6.2L applications, giving LT-based builds a cleaner way to add charge cooling and octane support without a complicated install.

This system uses a vehicle-specific throttle-body spacer injection plate, a braided stainless line, and 4AN fittings for a clean, reliable setup.

The VC-50 progressive controller reads boost pressure and adjusts injection as boost increases, helping deliver the right amount of water-methanol across the power curve instead of simply switching the pump on at full output.

With up to 25 points of octane increase, reduced intake temps, and a 52mm gauge-style controller that displays boost, injection percentage, low-level warning, fault codes, and more, this system is a strong upgrade for boosted Corvette and Camaro owners looking for better cooling, added knock resistance, and more consistent performance.

When Power Matters, Trust Snow Performance.