Fluid Management Systems
Founded 1985, Fluid Management Systems, Inc. designs, manufactures, and supports analytical instrume Founded in 1985, Fluid Management Systems, Inc.
designs, manufactures, and supports analytical instruments used by scientists to perform extraction, cleanup, fractionation and concentration of samples prior to chemical analysis. Some of the industries that rely on our sample preparation systems are, …
Automated sample preparation systems from FMS are designed to replace outdated, labor-intensive techniques that hinder laboratory productivity.
04/03/2018
New Semi Automated Solid Phase Extraction for Drinking Water and Waste Water Samples
EZSpe™
Easy to Operate
No Computers or Electronics to fail or maintain
Fast
The fastest sample processing available for SPE cartridges
Run up to six samples simultaneously
Vacuum for fast loading of large volume samples
Reliable
No Downtime, the simple design of the EZSpe System eliminates this with no electronic dispensing pump or valves
Low Cost
The EZPrep Semi-Automated System with Automated Bottle Rinse and Elution saving you money by reducing time and labor
Semi - Automated
Hyphenates the entire Solid Phase Extraction Process - Extraction, Bottle Rinse, Inline Drying and Optional Direct to GC Vial Concentration
Efficient
Uses all SPE cartridge sizes
Vacuum cartridge drying
Nitrogen cartridge drying
Automated Bottle Rinse and Elution
Inline Extract Drying
Quality Consumables
Guaranteed Certified Solid Phase Extraction Cartridges in many packing materials. Cartridges are guaranteed for Cleanliness and Performance. Single lot quantities can be supplied to reduce your in-house quality control.
Supports EPA Methods:
EPA Method 500 series
EPA Method 600 series
EPA UCMR
EPA Method 8000 series
Applications:
Drinking Water
Waste Water Water
Desalting
Juices
09/30/2016
FMS introduces the new “EP-110 Dioxin & PCBs Sample Clean-Up System”. The system processes the entire sample clean up in less than 25 minutes and deposits the final extract into the GC vial for GC/MS analysis. The system offers the following features:
Ø DCM free
Ø 20 minute run time
Ø 8 samples simultaneously
Ø Up to 8 g fat removal
Ø Integrated evaporation to GC vial
Ø Free service contract
09/30/2016
FMS introduces the new “EP-110 Dioxin & PCBs Sample Clean-Up System”. The system processes the entire sample clean up in less than 25 minutes and deposits the final extract into the GC vial for GC/MS analysis. The system offers the following features:
Ø DCM free
Ø 20 minute run time
Ø 8 samples simultaneously
Ø Up to 8 g fat removal
Ø Integrated evaporation to GC vial
Ø Free service contract
08/31/2016
Please contact [email protected] for any further information
Dioxin 2016 in Florence, Italy, we're introducing Our New low-cost low solvent EconoPrep for Dioxin sample Preparation
Poster Presentations:
Thursday, September 1st
12:15-13:00
Extraction of Phosphorus Flame Retardants from Drinking Water using Automated Solid Phase Extraction
Germansderfer PM
Oral Presentation: "New Methods of Analysis" - Michelangelo Room
Thursday, September 1st
15:45-16:00
A High Throughput, Low Cost and Green Approach to Automated Extraction, Clean up, and Concentration for Same Day POPs Analysis
Germansderfer
08/31/2016
Dioxin 2016 in Florence, Italy, we're introducing Our New low-cost low solvent EconoPrep for Dioxin sample Preparation
Poster Presentations:
Thursday, September 1st
12:15-13:00
Extraction of Phosphorus Flame Retardants from Drinking Water using Automated Solid Phase Extraction
Germansderfer PM
Oral Presentation: "New Methods of Analysis" - Michelangelo Room
Thursday, September 1st
15:45-16:00
A High Throughput, Low Cost and Green Approach to Automated Extraction, Clean up, and Concentration for Same Day POPs Analysis
Germansderfer
07/27/2016
RESOLUTION Microbial Genotyping System.
PathoGenetix to launch low cost model of Resolution system at IAFP PathoGenetix will introduce a low cost model of its pathogen detection machine at the International Association for Food Protection (IAFP) meeting next week.
02/02/2016
http://www.fms-inc.com/Products/PressurizedLiquidExtraction.aspx
A Hyphenated, Green, Economical approach for Extracting Compounds of Interest from Food
Pressurized Liquid Extraction is a "green" technology that replaces techniques like Sohxlet which is time intensive and requires large volumes of organic solvent. Used primarily for the extraction of compounds of interest from Food, Semi Solid and Solid sample matrices. This webinar discusses the extraction principles and the optimization of the extraction parameters that improves the extraction efficiency. The use of combined and hyphenated sample preparation and analytical techniques are presented. The use of combined and hyphenated results in a substantial decrease in the amount of sample, solvent, labor and time used with better efficiency and selectivity
Pressurized Liquid Extraction System Pressurized liquid extraction (PLE) is a technique performed to extract solid or semi-solid samples using organic solvents. Elevated temperatures (up to 200 °C) are used to increase the kinetics of the extraction process while applying high pressures (for example, 1500 psi) to maintain the organic s…
12/22/2015
Low Cost, High Speed Dioxin Sample Prep
EconoPrep 2 Sample System
Processes 2 Samples in 30 Minutes and
Over 20 Samples Per Day
Fast Dioxin Sample Cleanup, Parallel Sample Cleanup in as little as 30 minutes
Low Cost System and Consumables
Remove up to 7 grams of Lipid
Better ROI than Manual Sample Cleanup
Expandable, Simultaneously perform eight sample cleanups in as little as 30 Minutes
Unattended sample preparation
Same day turn around for multiple samples
Reduction in solvent usage and waste
Cutout glassware
Dramatic savings in time and resources
Automated Closed System Produces Low background
Economical Disposable Column Kits used for Dioxins and PCBs analysis based on lipid content
Chemistry Kit Rental Program available
11/05/2015
Click here to claim your Sponsored Listing.
Category
Website
Address
580 Pleasant Street
Watertown, MA
02472
07/26/2016
07/26/2016