BonWired Solutions

New Atlanta client needed assistance standing up a small site in WV. We were happy to assist.

MSP client had a need in Miami. Who are we to shy away from a little travel! Installed some APs and added some Logitech rally video bars to a few conference rooms. To be continued..next trip in 2 weeks.

New MSP client needed help with a Law Office move to a new suite. We jumped at he challenge and wired 15 locations as required.

Added a couple of APs for our MSP's client EV charging station need internet connectivity too!

Our MSP client needed help with a site in Tempe, AZ that another contractor backed out of unexpectedly. We could not let them down and made arrangements to complete their needs in 2 days.

Completed the installation of a new IP based conferencing system for a long time client.

Mount 2 86" LCDs, 4 ceiling speakers, 2 microphones, their respective hub, Small PC behind TVs, desk tablet. Ran 12 CAT6 wires approximately 150' to the server room.

Recently we completed the upgrade of an older DVR and some analog cameras at a local veterinarian clinic.

New Hawaiian BBQ spot in Dacula coming soon.

CAT6 wiring for data, 55" TVs for menu boards, 65" for video content paired to 6.5" ceiling speakers. open rack, switch.

Completed a project for our OG MSP client - RippleIT. Their client needed 13 existing wires tested, labeled, and terminated on a patch panel.

Add a striker from HES and a reader to complete their existing 4 door controller;

Install a Ubiquity AP;

Mount a 12U secure cabinet from

Recently completed an office move referral from MSP .com6 We were recommended to complete the Data wiring for the offices, provide access control for 2 doors, along with a Aiphone video intercom solution to safely allow the unlocking of the front door.

There is a first time for everything. We replaced a broken DKS gate opener with a LiftMaster LA400, and a Dahua VTO for remote operation; in addition to a Dahua 4k 8mp camera system with 4 cameras around the house.

For some reason someone decided to run the wires to the outside on this new build...I have a feeling that a sparky was the decision maker. We decided to terminate it all on an L-Com enclosure to avoid tearing up the inside to relocate the wires.