Hotdog Rocket Ship RC Lab

New Iayput is in at NORA Skagit River Raceway for the second half of the race season! Next points series starts this Saturday 12/20 🏎️🏁🌭🚀

Foam TC tire maintenance part 3 is up — sidewall gluing 🌭🚀🛞

Don’t round your front sidewalls very much so you get a nice flat surface for the glue.

Please note I don’t completely redo the sidewall glue every 4-5 runs, as I am doing in this video. Usually the glue can just be touched up a bit while maintaining tires. After 9-10+ runs I may need to start fresh with new glue.

Foam TC Carpet Part 3 — tire sidewall glue Showing the process for gluing sidewalls using a tire sidewall gluing spinner. Process is basically the same without the spinner — small amounts of glue and ...

Part 2 of foam TC tire maintenance:

🛞 skimming different compound tires back into balance
🛞 removing old sidewall glue
🛞 tire surface prep

I could make these shorter but it takes more time and I ramble along with additional info throughout my process so I think there is some value in that. Some of that info took me years to Iearn, Iike keeping a Iittle tension on the thumb screw when making depth adjustments.

Please let me know if you have any questions or if I omitted useful info.

Cheers,
🌭🚀

Foam TC Carpet Part 2 — tire maintenance Electric carpet foam tc tire maintenance part 2 — balancing used tires on a truer, prepping to redo the front sidewall glue.

I’m going to start sharing some foam TC info to help people get into running foams and transition from rubber tire to something more civilized.

Starting things off here with some info about tire maintenance, chunking, and compounds.

(Forgive me these videos won’t be very polished in the name of saving time)

Racers at our club have found Ulti tires to be working the best but some have had success with other brands. Favorite Ulti compound combinations so far (F/R):

(All tires except the 35E compound are nitro tc front tires)

38H/35E
38H/35H
R177MH/35E
R177MH/35H
35H/35H (measured 33 shore)
35E/35E (measured 30 shore)

I will keep sharing info as we learn more. Trying new things every weekend. The idea is to help everyone have the best driving, fastest, and most economical cars possible by testing things and sharing the data. This will also help people know what is worth running if certain compounds are out of stock when you need tires. Ultimately we intend to land on a spec tire that doesn’t have supply issues.

🏎️💨🌭🚀r

Foam TC — tire compounds and maintenance Racers at our club have found Ulti tires to be working the best. Favorite compound combinations so far (F/R):(All tires except the 35E compound are nitro tc ...

Our 17.5 LMH foam TC class is getting pretty serious now so it was time to finally update my touring car setup tools. This style of droop gauge is pretty awesome (chassis is sitting on 10mm blocks).

Event trailer for US Masters of Foam just dropped! Check out some foam tire ripping and clear your schedules. This inaugural memorial race for our dear friend Steve Curry will be an awesome event and way to celebrate one of the Pacific Northwest legends of RC 🏎️

We know you’re up there rebuilding some new kits before they ever see those heavenly tracks, Steve ✊

Masters of Foam USA 2026 Trailer -- "Steve Curry Memorial Race" January 16-18 2026, Mt Vernon WASteve Curry was a true PNW RC legend — a racer, mentor, and friend who touched countless lives in our community. The US Maste...

Xray X4 almost ready for some mod foam tc action. Getting prepared for the Steve Curry Memorial US Masters of Foam ✊🛞🏎️

Been knocking down some backlogged projects in the lab. Next on the project chopping block is this Vision Racing B6/B74 hybrid chassis that uses the front end of a B6.1-B6.3 and a B74-74.1 rear end. I never actually intended to run this chassis when I bought it ~3 years ago, I just wanted to buy one from Jeff Phelps because they were cool. Building it up as a shelf queen roller and using up as much of my AE parts supply as I can. Should be a cool one when finished!

Getting out and doing stuff with your friends is good stuff to do. Racing at NORA in Mt Vernon, WA today🏎️🏁🌭🚀