Bad Gecko Off Road

Celebrating a record month at Bad Gecko!

How about something for the JT/JL?

Hooking up the AuxBeam switch on a prototype under hood accessory mounting plate.

powerplant upgrade because I can’t leave well enough alone. ;-)

My rear driver side window stopped going up. At the door plug a multimeter told me I was getting 12v when the switch was down, but 0v when going up. I picked up a new switch assembly, installed it, and now it works. Other reasons your window may not work might be the door plug is not seated all the way, which I checked....

Jeep JK Window Switch Replacement My rear driver side window stopped going up. At the door plug a multimeter told me I was getting 12v when the switch was down, but 0v when going up. I picked up a new switch assembly, installed it,…

Making some cheap jack stand hangers.

Cheapest of the Cheap Jack Stand Hangers I needed to get my jack stands off the floor where they were always in the way. I took a cheap piece of hardware steel, cut it, bent it, drilled it, and screwed it to the wall. It took about 20 min…

No more stubbed toes.

Not an accident. Just have to change the low beam bulb.

Artifacts of a time before Lake Cle Elum.

Time for new bump stops but Jack doesn’t go high enough to fully extend the coil.

Sun reflecting off all the flat Jeep windshields making it blinding in the garage.