Brucker HVAC

We save our Customers BIG BUCKS 💵!

A service valve port was leaking Refrigerant around the base and the system held 16 lbs. of refrigerant. Instead of recovering the refrigerant and billing the customer for more time we made an efficient repair. Instead of recovering Refrigerant, brazing in a TEE service valve or just a port, we brazed in a Saddle Valve Port under pressure! Not losing a drop of refrigerant only adding what was lost due to a leak. This takes SKILL not to melt the Copper pipe and blow the whole Refrigerant charge!!! We only added 3 lbs of Refrigerant! Repair done within an hour!
That’s working smart and efficiently to save the Customer money!💵

Customer: My kitchen is smokey!

Brucker HVAC: When was the last time your Make-up Air Filters was cleaned???🤔

More cool details! 😎👍🏻

Our Technicians are technically competent on complex TRANE systems both Commercial and Residential! 😎👍🏻

UNBELIEVABLE!!!! This Customer had not one but 5 Heating & Air Companies out to fix their system in Dallas, Georgia!! A 2000 Square foot home with 9’ ceilings and vaulted ceilings, was originally installed with a 3.5 Ton system! What’s even worse, a Company sold them an unecessary dehumidification system that had to be at least another $3-4K!!!😳
A properly designed HVAC system is a DEHUMIDIFICATION SYSTEM!!!!!!

The hand sketch drawn is pretty close to how this system was installed! Like a total 💩 show!!! 😡

The supplies added in the kitchen and dining area of this home was different sized registers and nothing aligned or uniform!!! I didnt want to take a picture it was sooo bad!!!

Another Company changed out the system to install a 5-ton system. That part was OK, However the duct design was horrendous! They still had 3.5 tons worth of return air duct. It was so bad that one return air duct was right next to the return plenum and some company installed a 25’ section of duct wrapped around a truss, 360 degrees!!! You can’t make this stuff up!!!
It was so bad the TEL of the system was almost 150-200’ because of the twists and turns of the ductwork!!! It was the worst we have ever seen!
The system had 7 EWC zoning dampers and we reduced it to three!!!!
We literally removed almost $1500 worth of ductwork material and EWC Zoning dampers. This Customer was charged by the previous and last company over $5000.00 and the house could not get below 76 degrees in the Summer and not over 69 degrees this past Winter. They have 2 small children too!!!!

For the life of me, a Contractor with half a Brain 🧠 couldn’t have done work this bad!!!! The license holder should have been reported to the State Licensing Board who originally installed this system!!!

Not only was the EWC static pressure bypass was installed wrong, we re-done the entire ductwork in this home!!!

The pictures are the best we could take, but you can’t see the conditions we had to work in and climbing around to fix this system. The pile of ductwork picture is what we removed from the home and dumped at the Cobb County Dump!!!😳

We made this poorly installed DAIKAN system run almost as good as a TRANE system! It did run perfect when we got through!!!😎👍🏻🙌🏻

Another MAJOR screw up FIXED by the Brucker HVAC crew!!!! We are the BEST!!!!

Cobb County Residents……Tune Up Time for your Air Conditioning System!!!!

Cobb EMC has a “Tune up Program” to help pay $50.00 towards your tune up. However it is first come first serve! For more information call 770-439-7852

Register here:

HVAC Tuneup Rebate Cobb EMC's HVAC Tuneup rebate program encourages our members to schedule annual pre-season checkups with a qualified contractor to check that HVAC systems are operating efficiently. A yearly tuneup is one of several steps that our members can take to increase the efficiency of their heating and cool...

YES…..we do a “PROFESSIONAL JOB” installing Mini-split systems too!

Another perfect job! 😎👍🏻🙌🏻

Merry Christmas 🎁🎄 from Brucker HVAC!

Beautiful picture!