Armor Locksmith

𝗔 𝗳𝗶𝗿𝗲 𝗿𝗮𝘁𝗶𝗻𝗴 𝗮𝗻𝗱 𝗮 𝗯𝘂𝗿𝗴𝗹𝗮𝗿𝘆 𝗿𝗮𝘁𝗶𝗻𝗴 𝗮𝗻𝘀𝘄𝗲𝗿 𝘁𝘄𝗼 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝘁 𝗾𝘂𝗲𝘀𝘁𝗶𝗼𝗻𝘀.

𝗙𝗶𝗿𝗲 𝗿𝗮𝘁𝗶𝗻𝗴: 𝗛𝗼𝘄 𝗵𝗼𝘁 𝗱𝗼𝗲𝘀 𝗶𝘁 𝗴𝗲𝘁 𝗶𝗻𝘀𝗶𝗱𝗲 𝗱𝘂𝗿𝗶𝗻𝗴 𝗮 𝗳𝗶𝗿𝗲?
Under UL 72, the class number is the highest internal temperature (°F) allowed during the rated test.
• Class 350: intended for paper records
• Class 150: also intended for photographs and magnetic tape
• Class 125: also intended for flexible computer disks

A safe rated for paper can keep documents readable and still get too hot for some media. If you store hard drives or USB backups, check what the manufacturer says the rating covers for that media.

𝗕𝘂𝗿𝗴𝗹𝗮𝗿𝘆 𝗿𝗮𝘁𝗶𝗻𝗴: 𝗛𝗼𝘄 𝗹𝗼𝗻𝗴 𝗱𝗼𝗲𝘀 𝗶𝘁 𝗿𝗲𝘀𝗶𝘀𝘁 𝗮 𝘁𝗼𝗼𝗹 𝗮𝘁𝘁𝗮𝗰𝗸?
Under UL 687:
• TL-15 / TL-30: resists a focused attack on the door with specified tools for 15 or 30 minutes of actual working time
• TL-30×6: the same 30-minute test, applied to all six sides

A safe can carry one rating, both, or neither. Before comparing models, list what will go inside, such as contracts, cash or backup media. Then match each item to the rating that addresses its risk. Some insurers set minimum burglary ratings for certain coverage, so ask yours before buying.

Explore ArmorLock's safe options: https://www.armorlock.com/safes

𝗢𝗻𝗲 𝗲𝗺𝗽𝗹𝗼𝘆𝗲𝗲 𝗹𝗲𝗮𝘃𝗲𝘀. 𝗗𝗼𝗲𝘀 𝗲𝘃𝗲𝗿𝘆𝗼𝗻𝗲 𝗻𝗲𝗲𝗱 𝗮 𝗻𝗲𝘄 𝗱𝗼𝗼𝗿 𝗰𝗼𝗱𝗲?

If your whole office uses one shared PIN, removing that employee’s ability to use it means changing the code—and giving the replacement to everyone who still needs access.

A lock that supports individually managed codes offers another approach: disable that employee’s assigned code while leaving the others unchanged.

That distinction is worth checking before you buy a keypad lock.

Ask: “Can we disable one user’s code without changing everyone else’s?”

Then decide who will manage the codes and make access removal part of your employee departure checklist. Individual codes only help if people keep them private; they aren’t proof of who physically entered.

Also check for other access the departing employee may retain, such as a backup key or another shared code.

The buying decision goes beyond replacing keys with buttons. It includes how you’ll manage access when your team changes.

𝗤𝟰 𝗔𝗰𝗰𝗲𝘀𝘀 𝗔𝘂𝗱𝗶𝘁: 𝗪𝗵𝗼 𝗖𝗮𝗻 𝗢𝗽𝗲𝗻 𝗪𝗵𝗮𝘁?

Before the busiest part of the year, review employee, manager, contractor, and vendor access. If permissions no longer match people's roles, it's time to clean them up.

𝗧𝗲𝗺𝗽𝗼𝗿𝗮𝗿𝘆 𝗔𝗰𝗰𝗲𝘀𝘀 𝗦𝗵𝗼𝘂𝗹𝗱 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗕𝗲 𝗧𝗲𝗺𝗽𝗼𝗿𝗮𝗿𝘆

Vendors and contractors don't always need permanent credentials. Time-limited electronic access keeps necessary entry from becoming lingering access.

𝗣𝗿𝗼𝘁𝗲𝗰𝘁 𝘁𝗵𝗲 𝗗𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝘀 𝗬𝗼𝘂 𝗖𝗮𝗻'𝘁 𝗤𝘂𝗶𝗰𝗸𝗹𝘆 𝗥𝗲𝗽𝗹𝗮𝗰𝗲

Contracts, corporate records, licenses, and other critical documents can be difficult—or impossible—to replace quickly after a loss. Secure storage belongs in your continuity plan.

𝗪𝗵𝗼 𝗦𝘁𝗶𝗹𝗹 𝗛𝗮𝘀 𝗔𝗰𝗰𝗲𝘀𝘀 𝗔𝗳𝘁𝗲𝗿 𝗛𝗼𝘂𝗿𝘀?

Employees, cleaners, contractors, and vendors may all need different levels of access. Electronic locks make it easier to control who can enter—and when.

𝗢𝗻𝗲 𝗦𝗮𝗳𝗲 𝗗𝗼𝗲𝘀𝗻'𝘁 𝗙𝗶𝘁 𝗘𝘃𝗲𝗿𝘆 𝗕𝘂𝘀𝗶𝗻𝗲𝘀𝘀

A retail store protecting cash has different needs than an office protecting records or a warehouse securing high-value assets. Start with what you're protecting—not just the size of the safe.

𝗧𝗵𝗮𝘁 𝗦𝘁𝗶𝗰𝗸𝘆 𝗢𝗳𝗳𝗶𝗰𝗲 𝗟𝗼𝗰𝗸 𝗜𝘀𝗻'𝘁 𝗙𝗶𝘅𝗶𝗻𝗴 𝗜𝘁𝘀𝗲𝗹𝗳

A lock that's becoming difficult to turn is giving you a warning. Address worn commercial hardware early and avoid turning a small issue into an after-hours lockout.

𝗧𝗵𝗲 𝗦𝗮𝗳𝗲 𝗜𝘀 𝗢𝗻𝗹𝘆 𝗛𝗮𝗹𝗳 𝘁𝗵𝗲 𝗦𝗲𝗰𝘂𝗿𝗶𝘁𝘆

The right safe matters. So do its placement and installation. A commercial safe should be selected and installed around the assets and risks it's actually protecting.

𝗠𝗼𝗿𝗲 𝗘𝗺𝗽𝗹𝗼𝘆𝗲𝗲𝘀 𝗦𝗵𝗼𝘂𝗹𝗱𝗻'𝘁 𝗠𝗲𝗮𝗻 𝗠𝗼𝗿𝗲 𝗞𝗲𝘆𝘀

As your team grows, handing out more physical keys creates more access to track. Electronic locks make it easier to add, change, or remove access as staffing changes.