Mikes Auto Repair

Mercedes Sl500 blower motor is located under the cowl, under the cabin air filter and under the windshield wiper motor and linkage. This one hasn't been operational in years and the shaft was completely rusted. Fixed and on to the next one!

2016 Jeep Rubicon axle shaft replacement.. these things are stubborn to get out . I have a method where I use an old rotor and a hammer.. well that didn't work this time . So I had to go bigger. See video in the next post.

I'm back.. I lost access to my account and couldn't post here for almost two years.. been posting my auto repair stuff on my personal page.Check it out at Mike Eads. I will use this page in the future. Anyway changes are coming. I have listed my shop in Hume for sale and built a new one at my home west of Paris. Hope to be moved completely by the end of August.**** Edit.. I don't need help with the h*cker. It's fixed thanks.

Ford f250.5.4 three valve exhaust manifolds,intake manifold,kn air filter kit,both front hub bearing and seals and complete dual exhaust. Even if I had to take the brush guard off to work on it... 😂

Starter on a GMC Acadia.. the exhaust gets removed for this replacement...

GMC Terrain wouldn't stay running and was towed in . The famous 2.4 vvt solenoids got him. Quick and easy fix! Back on the road and happy customer!

Ford 5.4 three valve starter replacement...it was worn out...

2002 7.3 Power stroke new injectors, glow plugs ,uvch and a riff raff fuel line crossover kit plus fixed some intermittent electrical issues.

Jasper E4od behind a 7.3 Power stroke going in today. 3 year 100,000 mile warranty.

Typical 7.3 dipstick adapter leak.... The correct way to fix this is pull the engine pull the pan, replace the adapter and o ring and turn the engine upside down on an engine stand and clean surfaces and apply Rtv and allow to sit for 24 hours then reinstall engine.. someone tried to goop it up and still leaked....I took it apart. Pulled the nut off made sure to get the oring out, drop the other piece in the pan ( it won't hurt anything won't get stuck in the pickup) used an aftermarket that usually works to but this time the pan was warped...so I ground it down and Rtv the backside. Worked perfectly and no engine removal saving hundreds of dollars and not leaking!

7.3 diesel starter. Probably should fix those oil leaks too....