Allied Design Co
Share
Rapid prototyping, CNC Machining/turning, CNC Plasma cutting, 3D printing, welding, gen fab.
Turbogen tested to 3.5kw, this is the first flight with 50% fuel and using about 2.5kw at takeoff.
Turbogen startup in large quad.
04/28/2023
4140 high speed shaft for the hybrid gen system. First real part off of our new CNC lathe.
04/28/2023
ASA print for a local manufacturer. 18” OAL with a bond line in the center.
Demo turn on the new lathe.
04/07/2023
Added this Tormach CNC lathe to the shop. Small but capable machine used to manufacture the high speed engine generator shafts.
03/01/2023
Right out of the vise. 3D profiled out of bar stock on the FADAL with modern CAM tool paths.
Modern day CAM software on a 25 year old FADAL vertical mill. This is a test run for some upcoming 3D profiling work.
01/28/2023
Updates to the hybrid quad. Cellular modem (hanging under closest arm),RPi running linux, HD camera, and kamikaze pilot. This setup should be able to stream TM and video over 4G cellular network so range will be unlimited in the coverage area.
Shredding some 6061.
Calmotion USB drip feed rapid fire. Typical G code feed for a circular interpolation.
09/11/2022
Amazing what a little flood coolant can do for your surface finish.
Click here to claim your Sponsored Listing.
Category
Contact the business
Website
Address
CT-34
Orange, CT
06477
Opening Hours
| Monday | 9am - 5pm |
| Tuesday | 9am - 5pm |
| Wednesday | 9am - 5pm |
| Thursday | 9am - 5pm |
| Friday | 9am - 5pm |
| Saturday | 9am - 5pm |
| Sunday | 9am - 1pm |