Badger Forms

Invest in a set of Badger Aluminum Forms and if you take care of them, you will use them for a couple of decades and then sell them for more than you originally paid for them.

The type and area of a the weld matters. The Badger exclusive friction stir welded bracing has approximately 3/4 of a square inch of 6061 T6 bracing fused to the 6061 T6 face by stirring the two pieces of metal together with pressure and friction. Over that welded area the two pieces become one.

The MIG weld along the edge of the brace on the other form is 6061 T6 bracing material welded to a softer face material. The welded area is about 0.1875 square inches. MIG welds vary so some will have a little more welded area and some a little less.

Here is another installment on friction stir welded aluminum forms for casting concrete. Let's call this one: smooth face, swirled backside.

The second installment in a series about friction stir welded aluminum concrete form panels. It pretty amazing technology that allows 6061 T6 aluminum extrusions can be fused into one piece such that you can't feel the seam. They do it on space craft, why not on concrete form panels.

Friction Stir welded panels are unique to Badger Forms. This method of manufacturing results in an incredibly durable aluminum concrete form. Check out the 8-8 hole pattern forms below. They are not show panels, they are straight off the pallet just delivered to the customer.

The Badger Forms "Wedgeless Waler Bracket" serving double duty with a 2 x 12 waler in place. Available from 2 x 4 all the way up to 2 x 12.

https://youtu.be/TCApABvEUSY Concrete is brittle and shatters when a bullet or a big enough blast wave hits it. When you add SteelX mini rebar the concrete becomes blast and ballistic resistant. email [email protected] for more information.

Blast Test 3D printed concrete Social SD 480p Concrete is brittle. It easily shatters when hit by a bullet or under blast pressure. Adding SteelX mini rebar to plain concrete or 3D printed concrete make ...

Come and see us at the world of concrete. North Hall Booth 2513

We've done it; our 36" wide panels are now friction stir welded into one piece. It is leap forward for quality and durability. It's likely the biggest innovation in aluminum formwork since Western Forms introduced their gasketed side rails decades ago. Come see one at our World of Concrete booth N2513. It is just inside the North Hall.