Oak Fire Protection

Do you know what actually happens when a fire breaks out under your hood? 🧠🔥
3️⃣ The Manual Backup (Pull Station): Your emergency trigger. Located right on your exit path, so you can activate the system instantly on your way out.
Most restaurant owners only see the steel tubes and the inspection tags, but your Kitchen Hood Fire Suppression System is a highly engineered 'brain' designed to save your business in seconds.

Here is what we verify during every certified inspection:

1️⃣ The Detection (Fusible Links): These tiny links are engineered to melt at exact temperatures. If they are covered in grease or painted over, the system won't 'know' there's a fire.
2️⃣ The Delivery (Nozzles): Clean, unblocked nozzles with intact blow-off caps ensure the wet chemical fires directly at the flame, smothering it instantly.
📲 Call or text us at (510) 828-7434 to schedule your compliance check!ight on your exit path so you can activate the system instantly on your way out.

Is your system actually ready to protect you? Let's find out before the Fire Marshal does. 🌉

📲 Call or Text us at (510) 828-7434 to schedule your compliance check!

The #1 reason emergency lights fail? It’s the silent killer inside: The Battery. 🔋🚩

Most business owners think that if the bulbs turn on when they press the button, they’re safe. But in California, NFPA 101 requires these units to hold a charge for a full 90 minutes. ⏱️

Over time, batteries swell, leak, and lose their capacity. If yours haven’t been load-tested recently, you’re not just risking a Fire Marshal fine, you’re risking the safety of everyone in your building.

At Oak Fire Protection, we do the dirty work. We open the units, test the load, clean the terminals, and certify your building’s safety. 🛡️✨

It’s more than just a light; it’s a legal requirement. 🛡️💡

Per NFPA 101 and the California Fire Code, your emergency exit lights aren't just there for show. They are life-safety devices that must stay on for at least 90 minutes during a power failure.

A quick 1-second "push test" isn't enough to guarantee compliance. Our annual inspection includes:

✅ 90-minute load testing to ensure battery capacity.
✅ Bulb & battery replacement on the spot.
✅ Official certification & tagging for the Fire Marshal.

Don't wait for an emergency to find out they don't work. Stay compliant. Stay safe.

📲 Call/Text Oak Fire Protection at (510) 828-7434