We specialize in Import Performance, Regular Repairs, Welding, Fabrication, Dyno Tunning, Wiring. We sell aftermarket parts too. Contact us at 973-732-6887
Here at Tutomo Racing we offer top of the line services at an affordable price. From Fabricating to ECU chipping, we can help you with all your automotive performance needs. We specialize in Honda, Nissan, Mitsubishi, Mazda, and Subaru. You can also check us out on instagram @tutomoracing
-Repairs
-Chipping
-Fabrication
-Welding
-Wiring
AND MUCH MORE
Operating as usual
FOR SALE!! Seibon carbon fiber ek trunk, CCC Racing Wing and carbon fiber license plate cover. In great condition, asking $1500. Contact me or @joe_the_mayor_fo, if you’re interested.
FOR SALE, super clean SILVIA Steering wheel. I was gonna install this on my s13 240sx, but I took a different route. Asking $300 OBO. Contact me if interested. Tutomo Racing.
After installing a Link G4X/BTI gauge/safety sensors/PRP R35 conversion Coil Kit/NZ Trigger kit and Whiteline diff bushings. We put @willwang_photo on the Mainline ProHubs for a nice tune on Pump 93 and it’s ready to go. Call us for all your performance and Dyno Tuning needs.
@bobbykrikorian was at the shop doing his thing. He fabricated and welded a full 3in exhaust to a 3 1/2inch outlet for an sr20vet swapped 300zx . Great job amigo!!
🔥🔥🔥🔥
We had our good friend @bobbykrikorian kseries MR2 on the Mainline Prohubs to fine tune his car. It made more power than expected. Another happy customer. For numbers ask him. Lmao 🌽
Saturday we had this pretty rhd supra on the Mainline ProHubs for some power pulls. This baby has a 2jz NA T. Makes good power on E85. Watch full video for numbers.
Few days ago, we had this G35 on the Mainline Prohubs. Car came in with a few bolt-ons, on pump gas. We used Uprev to tune it. Watch full video to see all dyno numbers.
Selling this Corbeau Forza Bucket seat. Brand new never used. Asking $250 OBO. Contact me if interested.
We finally got this sexy 1jz bmw on the Mainline Prohubs. Car runs on a Link Fury ecu with alot of custom work done. Car made good power on pump and E85. Another happy customer. 🌽
Want to thank and big a huge SHIUT OUT to @elar2d2 . He told me he could take the paint off the del sol zigziga’s, and he did more then I could imagine. He cleaned and restored them to look brand new. Thanks again Arturo!!! Swipe left for results.
This pass week, we had @ladybug_eg on the Prohubs. Car was tuned all motor and with some happy juice. Car made good numbers. Another very happy customer.
8th Gen Honda Civic Si on the Mainline ProHubs a couple days ago. Customer was very happy with the outcome.
Tutomo Racing will be closed from Friday April 23rd to Monday April 26th. We will be back in business Tuesday April 27th. Have a great day everyone!!
We had this Ae86 back in March on the prohubs. Car came in to get coil conversion kit, trigger kit, intake pipe with filter and megasquirt installs. We had a few issues along the way, but at the end everything function and car was tuned. Another Happy Customer👍🏼👍🏼.
Couple weeks ago we had @og_sweettea 1jz gte-vvti powered 240 on the prohubs. Car ran on a LINK G4x Monsoon ecu. We were able to fix a few minor issues and car made good power. Another Happy Customer! #240
Link again is having a great SALE. Give us a call for more i formation.
We received some Flashpro’s today for a few customers!! Thank you for all the support guys. They are ready for pick up.
We had @abe_ratedr at the shop dialing in his @lafluffy_sfwd on our Mainline ProHub Dyno last night. Car made some great numbers, and best of all, NO TIRE SLIP. Repeatable results with no drama!! Always a pleasure to help! Watch full video to see all graphs.
Anyone looking for MFactory or Synchrotech parts??!! We can get them all. Give us a call for inquires and pricing!
Any one looking for EcuMasters Ecu’s? We are a Authorized Dealer. From the Classic EcuMasters version to the Black version. Great ecu’s and very affordable. Contact us for inquiring and pricing. Also in house dyno tuning and wire specialist.
Just completed assembling an SR20DET S15 Long block for a customers S15. If you need an engine built or parts for your build contact us for a quote.
We had @mt_garage bone stock kseries EK, on the ProHubs this pass weekend. Car made good numbers and customer was extra happy with the tune and the test drive.
Everything except one piece of the puzzle is still missing for this owner’s skyline. Who could all these parts be for🤔🤔??
We had @dematti32 on the Probubs couple days ago. Car came in for a E85 setup install and tune. This beauty runs on a Emtron KV8, we also installed awhile back. Due to turbos maxing out. We could not push it any further.
We have 2 left!! These Ecliptech Shift lights are a great addition for your car! You can use the Shift-I and Shift P2+ as a reference to maintain performance targets, particularly when setting speed at corner entry and getting the right line for maximum corner exiting speed. Contact us for pricing!
This super clean Nissan BNR32 GTR has some impressive stopping power courtesy of Supertec Racing R35 GTR Brake retrofit Kit.
It came in for an E85 kit install and tune running on an Emtron Engine Management Electronics KV8 ecu we installed and tuned previously.
Tuned on our Mainline DynoLog Dynamometers ProHubs!!!
Link's latest platform, G4X!! It’s headlined by a faster microprocessor, higher speed communications chip and 512 Megabytes of data logging across the entire product range.
Always great combinaton! 💪😁🤟
Ecumaster PMU combined with
Emtron Engine Management Electronics SL8 Ecu.
Amazing flexibility and engine control from these two lesser known companies that are changing the industry.
Fortune Auto SALE. Don’t miss out! Prices are going up!! Get your set NOW. Tutomo Racing!
Congrats to Link ECU! We are happy to be a dealer for them, please contact us for your tuning needs!
linkecu.com Link ECU equipped drift cars top the podium in a shortened 2020 Formula Drift Japan season! Congratulations Andy Gray, Kazumi Takahashi and Koichi Yamash*ta.
Christmas came early for some customers!! Here we have a few new G4X link ecus waiting to get installed!! We are a Link and Haltech dealer, but also sell many other brands. Still alot of discounts going on if anyone needs anything. Give us a call or contact us thru IG or FB.
We had @chinzo32 r32gtst 4 door this pass weekend. We installed and wired up a Link G4x, plus some safety sensors and a flex fuel sensor. After installation, car was tuned on pump gas only, on our Mainline ProHub. Watch full video👍🏼.
Last week we had @kj4unme Aristo on the Prohubs. Made some good numbers. Another HAPPY customer.
BLACK FRIDAY SALE!!! All LINK ecus are 15% off till the end of the day TODAY NOV. 27th. Call us for information and pricing!
Monday | 10am - 7pm |
Tuesday | 10am - 7pm |
Wednesday | 10am - 7pm |
Thursday | 10am - 7pm |
Friday | 10am - 7pm |
Saturday | 9am - 6pm |
Specializing in the wrapping: Car. bus. Wheels. Microphone. Boat. We also do custom work as: Custom
Buyers, sellers and exporters of used trucks, parts, heavy equipment and machinery!
We provide high quality powder coating services to fit your needs. Our services include Powder Coating & Thermal Barrier Ceramic Coating
Performance shop Engine tuning n upgrades Engine swaps- turbo-supercharger-nitrous
Performance shop Engine tuning n upgrades Engine swaps- turbo-supercharger-nitrous