The Dub Shop
Share
Bringing VW's into the 21st century, 4 injectors at a time! In 2000, Fuel injection came into my life. The results changed my life! And The Dub Shop was born.
I built one up, spent about 2 years gathering all of the needed bits and pieces to complete my own install on a 1600cc engine. I have always had a passion for computers, electronics and cars; so this was the best of everything. A few iterations and a couple of years later, I decided to start putting kits together for others.
I made it to the shop for a few hours today to catch up on some week I've missed. When its already like 90 degrees out, 4000 watts of laser heats things up a lot 🥵
06/14/2026
Mark is doing engine prep. He had his manifolds Cerakoted, and they are sharp😎 He is waiting for a few more parts to get this buttoned up. He races in the East Coast ASA class (Aircooled Streetcar Association). Check it out!
06/09/2026
Hey everyone, as some of you know Mrs. Dub Shop and I are moving! The next 2 weeks our life is going to be wrecked, so email is going to be the best way to get in touch with us. Please allow for a little extra time when placing orders, chances are we won't be able to get stuff out the same day.
Right now it is only the house and the shop will be moved in a few months, that is going to be a undertaking of it's own😵
Thanks everybody!!
06/04/2026
I've made a tubing adapter to go from the 3" manifolds to 2.5" tubing. I guess some people don't want to party all the time😄 This also makes intakes in a sedan easier to manage with the tighter bend radiuses available in 2.5". This leads to the next part, a throttle body tee for DBW throttle bodies to make everyone's life easier 👊🏻
06/02/2026
Porting template, porting, gaskets, one stop shopping :)
06/02/2026
Grinding on a Tuesday! My shoes are full of aluminum today because I wore shorts 😂
Road test soon! Sounds ready for the spotlight ✨️
05/30/2026
Injection baby, injection 👌
Working on an engine? Get our port sealing kit to keep debris out while doing service or for storage. We have them in Grey/Black, Red/Black, and Black/White🙂
05/27/2026
It's about time I make some upgraded EFI end castings for larger engines, or just more RPM before the runners choke the heads. I pulled some old files out to have a look. They are pretty raw and they need some work, but almost close enough to get quoted for 3D printing in aluminum 🤙
Click here to claim your Sponsored Listing.
Category
Contact the business
Telephone
Website
Address
17239 Tye Street SE, Ste E
Monroe, WA
98272
Opening Hours
| Monday | 10am - 5pm |
| Tuesday | 10am - 5pm |
| Wednesday | 10am - 5pm |
| Thursday | 10am - 5pm |
| Friday | 10am - 5pm |