Norsemen Custom Cycles

Norsemen Custom Cycles

Norsemen custom cycles is a small family-owned business dedicated to delivering professional service

Photos from Norsemen Custom Cycles's post 10/20/2023

We have had another great year this year and I want to send out a big thank you to everyone! To show our appreciation for your continued support, we have decided to run some specials.

-Labor for any motor work done to twin cam models while being stored this winter will be reduced 50%!

-From here on out when you buy a tire through us you will pay zero dollars to have it mounted and balanced!

Thank you again and I hope everyone has a great day

Photos from Norsemen Custom Cycles's post 10/05/2023

Here is a very small pool of the bikes we have been working on this year. The shop has been very busy, so we didn't have much time to do the usual Facebook posts for the bikes this season. Regardless we have had a lot of fun this year and took on a lot of really cool projects.

Photos from Norsemen Custom Cycles's post 10/05/2023

We have the bottom end of a Softail getting rebuilt here. I hope everyone is doing well. Norsemen Custom Cycles has started taking in winter storage. We have 10 spots left. Be sure to call and reserve a spot if you want one.

I also want to thank JIMS for providing some of the best tools in the industry.

Photos from Combat Veterans Motorcycle Association MN 48-2's post 06/04/2023

Memorial Day: A day to honor and remember those in the military who died fighting for this country.

Please be mindful that those we honor and remember did not go alone! They had others there with them that were fortunate enough to make it home. Please keep them in your thoughts this weekend as well. Its not an easy weekend for them.

(Tallia typing here 😬 joe doesnt know im doing this)

We hope you all enjoy your weekend!

Shop is closed until Tuesday!

(please don't call wondering where your motorcycle is, I promise you it is in the shop and my husband will call you as SOON as it is ready)


Spend time with your family and hug them tight!

We love you all! And appreciate your continued business with Norsemen Custom Cycles!

Photos from Norsemen Custom Cycles's post 04/08/2023

Spring is here! We are off to the races! Stop in and see us.


Combining a small-town feel with dealer-level capabilities!


I'm still about a month and a half scheduled out but if you would like to plan ahead here is a link you can schedule a drop off or annual service. Look forward to seeing you all this season! If you don't know all the info right off just leave it blank.







Getting a worn out cam chest upgraded this afternoon 😎


I'll never pump lifters up with an oil can again! 🤣🤣🤣. I've been testing this out for almost a year now (hence the lifter grave yard) and I am impressed. This not only quickly tests the outside diameter of the lifter while pumping them up for install but also let's you test the internals of the lifters by pressing on them while providing pressure. Very nice set up by JIMS.


I don't care if it's an older twin cam, a Tc with the upgraded chain, or a brand new M8. Every time Norsemen Custom Cycles goes into a cam chest the chains are getting polished. All the way to 2000 grit and finished with Rouge. It makes the chains smooth as glass and saves wear on your tensioner. Hope you are all staying warm and having a great Thursday!


6 thou run out on a 2022! Definitely not ideal. What do you guys think?


You would think the moco would have learned there lesson about these INA inner cam bearings after the twin cam 🤣🤣 Let's hope they have improved since then. Either way I am probably still going to stick with the tried and true Timken.

Photos from Norsemen Custom Cycles's post 02/22/2023

Let's add a little something to this 114! 😎

Photos from Norsemen Custom Cycles's post 02/15/2023

Install of some Rockford Fosgate speakers into some saddle bag lids. It was a fun project. If you want installs so clean you can eat off them, come see us in Mc Intire!

Photos from Norsemen Custom Cycles's post 02/03/2023

Nothing makes for a more relaxing time in my opinion than throwing on some alman brothers and lacing/truing up a wheel.

Photos from Norsemen Custom Cycles's post 02/01/2023

Hooking this Evo up with a needed top-end refreshment 🍹😎


Yeah its been like this for awhile now 🤣🤣🤣 one more wont hurt!

2023 Drag Specialties FatBook 01/24/2023

Heres the 1900 page monster. Covers M8*Pan america*Twin cams*86 and up sportsters!

2023 Drag Specialties FatBook The LeMans Corporation, through its brands Parts Unlimited & Drag Specialties, is the world’s largest distributor of aftermarket accessories in the powersports industry.

2023 Drag & Parts Unlimited Indian 01/24/2023

You know I gotta show love to my Indian riders too!

2023 Drag & Parts Unlimited Indian We packed 10 catalogs worth of new product into one handy resource: the 2021 Drag Specialties/Parts Unlimited Mid-Year Update catalog.

2023 Parts Unlimited Helmet & Apparel 01/24/2023

A little less known is the fact that we can supply jackets, boots, gloves, and even helmets. Take a look and let us know if you are intrested in anything. We can ship anywhere in the us.

2023 Parts Unlimited Helmet & Apparel Quality gear makes every ride better. The 2023 Parts Unlimited/Drag Specialties Helmet & Apparel catalog is the #1 resource for riders who want the top brands.

2022-2023 Drag Specialties OldBook 01/24/2023

Just gonna throw this up here incase anyone wants to flip through it. Let us know if you want anything. Ship anywhere in the us!

2022-2023 Drag Specialties OldBook The LeMans Corporation, through its brands Parts Unlimited & Drag Specialties, is the world’s largest distributor of aftermarket accessories in the powersports industry.


You know who ya are....just know if the ol lady calls. You havent ordered in months and I don't know nothin. 🤣🤣🤣


Its not my fault, I have a disease 🤣🤣

Photos from Norsemen Custom Cycles's post 01/14/2023

Just wanted to throw out a little psa out into facebook land. Norsemen Custom Cycles can and does work on the newer motorcycles on a regular basis. We have the ability to bleed your abs properly, change your ecm and even clone your old ecm. We can install new bcm, tssm, speedometers, and calibrate all of them. We can program your key fobs and even set new or recover pins. We can custom tune the fuel injected bikes via our open loop shop tuner. This provides a much healthier running engine than just buying a tuner online plugging in a base map and going. I could keep going but this is long enough already. We strive to provide all the ease of access and proffessional service to our customers as the much larger dealerships, all from small town Mc Intire. Thank you for taking the time to read this! Enjoy the poorly taken pictures of the software doing its thing 🤣🤣

Photos from Norsemen Custom Cycles's post 01/12/2023

I would say that this ol girl was ready for a rebuild! Make sure you dont have anything rubbing on your master cylinder boots or your brakes could look like this too.




Got a helper in the shop today! Productivity is up across the board 🤣🤣

Photos from Norsemen Custom Cycles's post 01/10/2023

A whole lotta bad ass that wont ever be seen but, you will for sure know is there! Looking forward to getting these installed. Legend Suspensions is simply amazing! Norsemen Custom Cycles loves doing these suspension upgrades!

Photos from Norsemen Custom Cycles's post 01/05/2023

I know I went radio silence for awhile. Sorry, I got lost in this maze of motorcycles 😉. Hope everyone is still doing awesome. Nothings changed here.

Photos from Norsemen Custom Cycles's post 01/04/2023

I finnally got around to getting some more shirts in stock. I apologize to everyone that wanted one that couldnt get one on the last round. I ordered 200 of them this time so we should not run into that issue for awhile. We have the Norsemen Custom Cycles logo tees in stock in all the popular sizes. We upgraded the shirts quality by a lot this round and they fit and feel awesome. Those will be going for $20. We have also brought in a new design. The "Viking biker" (i havent thought of a better name yet) those have an all black front and the large white logo on the back. Those will be going for $17. Also have those in all the popular sizes. The art work was done by one of my Marine brothers, Adrian Curley . Thanks again man you did awesome! Also I wanted to thank Terminus Tees for making this all possible. You guys have been fantastic to work with the whole way through! If anyone wants a shirt let me know or just stop on in the shop.

Want your business to be the top-listed Autos & Automotive Service in McIntire?
Click here to claim your Sponsored Listing.

Videos (show all)

I'll never pump lifters up with an oil can again! 🤣🤣🤣. I've been testing this out for almost a year now (hence the lifte...
6 thou run out on a 2022! Definitely not ideal. What do you guys think?
Sportster all set for winter storage. Intake leak fixed, carb tuned, detailed, and full service for this beautiful machi...
Week 7 update: Changed direction slightly and started checking out the bottom end. Sprocket shaft checked out good. Cran...
Took a peek at the rear shoe and it is also busted off of one corner. Time to dig deeper.😥
Screaming eagle cam plate testing
Got to extend a CB 750 exhaust! Turned out good in my opinion! Hope everyone is staying safe out there! #custommotorcycl...
Got this wheel from the 70's nice and trued up! 😎Forgot how relaxing it is to chill and true a wheel! Got it trued to wi...
Loose spokes
Hey, just a friendly reminder to maintain your springer this year. The rockers on your springers are integral to the way...
Quick video showing how I like to make handlebar inserts. #rideanddestroy #chopperlife #chopperporn #choppermotorcycle #...



309 Main Street
McIntire, IA

Opening Hours

Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Other McIntire autos & automotive services (show all)
Meyer Garage SAAB Imports Meyer Garage SAAB Imports
2687 480th Street
McIntire, 50455

Iowa's oldest SAAB dealership. Meyer Garage: 641.737.2239