Status Garage

2006 EVO IX FOR SALE!!

2006 Lancer Evolution IX

Drivetrain:
MAPerformance SPEC Built 4G63 2.0L stage 2
ARP main studs
Callie’s Ultra Enforcer I-Beam Rods
New OEM oil check valve and oil squirters
New OEM crankshaft
ACL race bearings & washers
Wiseco pistons 1400HD 9:1
New USDM OEM block
GSC S2 camshafts
GSC intake / exhaust valves
OEM lifters
Brian Crower springs/retainers
New OEM spring seats
GSC valve seals
OEM multilayer headgasket
OEM timing kit with gates timing belt
Balance shaft delete w/ belt delete

AMS fuel rail
OEM ported intake manifold
ID1000 injectors
Aeromotive Fuel pressure regulator

FP red turbo (550hp)
Tial external waste gate w/ hood dump
HKS SSQV blow off valve
Short route intercooler piping
4” big front mount intercooler

ACT stage 3 6-puck sprung clutch
OEM flywheel
ACT throw out bearing
ACT HD pressure plate

Built transmission by reboot engineering /AMS
All new gears
Carbon synchros
4:11 final drive
External oil pump
Upgraded input/output shaft

Seibon Carbon fiber hood (clear coated)
Victory function V2 CF fenders (clear coated)
Voltex front bumper
CWest rear bumper
Wing delete w/ Clinched flares duckbill
OEM Recaro seats
NRG quick release with Momo steering wheel
AEM Uego wideband w/ gauge
AEM boost gauge

Energy suspension differential and mustache bar bushings.

Battery relocation

11” android tablet

490hp/375tq tuned by House of Power w/
Open source tuning

Clean VA title with no leans

DM for more pics or questions about other parts not listed.

$250 referral that leads to sale

OEM 18 inch 350z wheels wrapped in Falken Ziex tires with about 6/32 tread left. OEM staggered Front 225/45/18 and Rear 245/45/18. Posting here before I throw it on market place. $400obo

Soft opening of my online store. I am going to be adding new designs every 2 weeks until June. Starting in July I will begin to add t-shirts and a dedicated page to request custom decals.

www.statusgarage.co

Big thanks to all of you that have already put in orders prior to this post. I have already made and shipped out every order as of last week.

First 50 customers starting today will recieve a bonus slap AND decal with their purchase.

Use code "LOCKDOWN" to recieve 20% off your purchase. No minimum purchase required!

#240 #15

Out with the old, in the with new in 's FC. We put in Braum seats paired with planted brackets and Braum harnesses. Just barely cleared the headliner and sits nice and snug in front of the half cage. Glad me and the misses are finding time to do car things. Shout out to cage is holding up wonderfully.

Its official. Car is registered and plates are on the way. S/o to for taking care of the body work and getting the dorkidori kit painted to match the OEM two tone. Upper half wrapped in Avery Dennison SW900 Diamond Red. I'll hopefully be a part of the 500hp club after the top mount setup on the 1jz gets tuned later this month.

Chrome delete on this VW Atlas. Had lay all the vinyl while I chased around and trimmed. Half Avery Dennison gloss black metallic and half Avery Dennison matte black for front grill, head light trim, window trim, body side moldings, rear trim and bumper applique. Will be tinting the VW emblems and wrapping the roof rack next week for a full delete!

Sometimes I just want to post up an entire how-to on installs but then I feel like id be out of business. AEM CD-7 dash pack installed in oem cluster location. Customer didnt want to use brackets or a relocation kit. Modified enough to show off the sequential shift light but kept the bottom nice and clean at the dash pack screen cutoff for a oem+ look.

Thought I would make a custom switch panel for the new setup in the 240. Made out of Lexan, PTS switch, a battery kill, indicator leds and a few colored pilot switches for ignition, fan and fuel pump. Laying all the ground work before the 1jz goes in.

Started fresh with a new bumper, installed Roush fog light bezel and fogs. Wrapped the bumper in 3m 1080 Satin Battleship Gray. All ready for the Toys for Tots event.
Owner:

Definitely long overdue. Finally made time to do a front end swap from BRZ to the 2014 FRS front end. I kept the factory BRZ headlights and just hardwired the new fogs and DRLs to the factory harness. Bumper and lip freshly painted thanks to and . New canards, tinted emblem and finally throwing the front plate back on. Can't wait for the rest of the kit to come in.