Modern Rescue USA-Rescue Equipment Solutions

CMC has released a inspection notice for the Capto. If you have any questions please reach out to us even if you did not buy from us. We are here to help.

CMC is issuing a Product Safety & Inspection for the CAPTO™.

Through our internal inspection processes, CMC has found certain instances where the thread locker that secures the CAPTO cam set screw may not have fully cured. This potentially affects CAPTO 11 MM Gray (Part # 336011) and CAPTO 13 MM Red (Part # 336013) models from serial number 23191-001 through 26085-034. If the set screw becomes fully unthreaded, the cam spring may fall out, causing the cam to not function as intended. There have been no reports of any set screws coming loose in the field, but out of an abundance of caution we request that customers inspect for the presence and position of the set screw to ensure that it is installed properly. We have corrected this issue for current and future CAPTO production.

The same thread locker is also used as a secondary method to secure the pulley fl**ge. While we do not expect any issues, CMC still advises that customers also inspect the pulley fl**ge while inspecting the set screw position.

If you have a CAPTO, please immediately inspect your device using the inspection steps included in the Inspection & Safety Notice.

To view the notice and inspection video see link below.

https://hubs.la/Q04hqQdX0

https://hubs.la/Q04hq-FS0

As Stated before we are a new INMAR Dealer serving the Carolinas and surrounding states. Stop by our page for more details and contact information.
https://modernrescueusa.com/pages/inmar-inflatable-boats

Its Official!!!! We are now a INMAR Dealer serving the Carolinas and More. Contact us for Details! [email protected]

Merry Christmas and Happy Holidays from everyone at and

Check it!!! From our friends at CMC: Rescue, Safety, Access

When it comes to anchor plates, redundancy doesn't necessarily equate to increased safety. An anchor plate should not be backed up if is from a reputable manufacturer, properly tested and rated, and is made in such a way that it either has no moving parts or will not release the load due to a single human action or single mechanical failure. There are potential drawbacks to doubling up anchor plates such as placing a wider load on the attached carabiners and reducing their overall breaking strength. This results in a negative effect on user safety . . . . #cmcschool #cmcpro #cmcpro_official #roperescue #firerescue #cmcrescue #rescue #csr #confinedspacerescue #roperescuetechnician #roperescuetech #roperescueprofessional #roperescuetraining #firstresponders #rescueinstructor #ropeaccesstechnician #roperescuegear #instructorinsights

Check it out!

LINESCALE 3I When accuracy matters, choose the all-in-one load cell that is strong, smart, and ultra fast. LineScale 3i is a high-strength, high-speed load cell designed for the demands of rope rescue, rope access, and technical rigging. Milled from solid aluminum with a 90 kN minimum breaking strength and PPE c...

We recently provided 30,000 feet of Pigeon Mountain Industries rope for a customer of ours.

Did you know that we are a Dealer for Air Systems International, Inc. ? Contact us for your questions or air system needs!