47point9

That's a creative way to let me know your order number to send me a key for cutting 😆

⚡ 3D printed a prototype that houses a magamos 13 immobilizer for newer Hondas - including the S2000! I will have both blanks available - the HD103 and HO01 (laser cut keys) for the newer models. Going to machine a titanium sample for further testing!

😑 My 240SX keys are back in stock. I've actually had this batch for a while but I never got around to finishing out the surface. Visit 47point9.com/240sx to get yours!
👽 In the background is my own 240SX I bought a month or two ago. While I'll likely never actually drift it, I've got it decked out with all kinds of drift goodies and it currently has a built 1JZ sitting in it. Probably yanking the 1J and doing another motor 🤔

🤔 About to do some measurements and model adjustments to fit a transponder. Finally going to try to work out the details for a modular key system... if all is well then I should be able to prototype a few keys in the near future.
♥️ What key do you want to see me make next? Drop me a DM and I may give you the first prototype to test.

⚡ I'm thinking about adding the edge knurling as an option on my Honda nax keys - thoughts? This was my first try at reproducing the look and feel. I have since created a 3d depth map and tested different settings and engraving depths, with a few promising results.
✅ Im going to do another test or two. I initially was going to machine this area into the key but I thought the process of cleaning up the surface would muddy the fine details.

1️⃣ One of my "Oldschool" Nismo lighter handles going out in a purple anodization. I've been thinking about making some custom toggle switches for one of my projects I'm working on using this kill switch design as the base... either this or a canbus switch panel, but I think titanium switches sounds a lot cooler 🫪
These mount over your existing cigarette lighter or you can purchase with the optional "lighter blank" for a flush mount against the hole your lighter presses into. I've redesigned the lighter blanks to be a tight fit, but a dab of adhesive keeps them perfect.

🤔 One of my Honda keys with an S2000 engraving... v***r blasted and anodized blue. CNC machined from solid billet titanium. The "v***r blasted finish" is a satin/matte surface that is done with a fine media in a wet sand blasting cabinet. The slurry of media and water blasts the surface of the metal, providing a nice premium finish that closely resembles the original NSX key finish.
✅ What do you want to see me make next? I've been sitting on a few key designs and hope to get the prototypes knocked out in the near future.