Express Restoration

When water, fire, or mold wrecks your kitchen/bath, Bob’s rebuild crew handles cabinets start to finish. Not just box swaps – actual custom work.

Cabinet Services Bob’s Team Provides

1. Water Damage Assessment
• Toe-kick removal: Techs pull toe-kicks day 1 to check for water under cabinets. If particle board backs are swollen or MDF is blown, they won’t dry. Bob documents it for insurance.
• Salvage when possible: Solid wood cabinets + boxes can often be saved with aggressive drying + antimicrobial. Bob won’t tear out what doesn’t need it.

2. Pack-Out + Storage
If cabinets are salvageable but need counter removal, Bob’s contents team packs out dishes/contents, labels doors/drawers, and stores everything climate-controlled until reinstall.

3. Insurance Scope
Bob writes Xactimate line items for:
• Detach/reset cabinets
• Remove/replace cabinet boxes
• Finish carpentry for custom trim/fillers
• Countertop detach/reset or replace
Adjusters approve it because it’s documented with photos + moisture readings.

4. Custom Rebuild Options
Bob’s carpenters don’t just do big-box stock. They build/install:

• Custom cabinet boxes: Birch ply boxes to replace water-damaged particle board. Stronger than original.
• Match existing: Stain match + door profile match so new sections blend with undamaged runs.
• Full kitchen replacement: If 50%+ is damaged, insurance often owes for full replacement. Bob’s team designs new layout if you want upgrades.
• Bath vanities, built-ins, bars: Same process for any cabinetry.
• Finishes: Paint grade, stain grade, glaze, soft-close, dovetail drawers, pull-outs.

5. Countertops + Install
Bob coordinates templating + install for granite, quartz, butcher block. Sinks + faucets re-set. No subs you have to manage.

Why use Bob for cabinets vs. a cabinet shop

Bob’s Mitigation Close-Out Checklist

1. Dry Standard Verified
• Moisture readings: Techs use pin/pinless meters + thermal imaging. All structural materials must be back to “dry standard” for Edmond – usually ≤15% for wood, ≤1.0 for drywall.
• Psychrometrics logged: Daily temp/RH/grain depression readings prove the structure dried, not just surface dry.
• No hidden moisture: Cavity checks behind baseboards, under cabinets, inside walls. If meters don’t read dry, equipment stays.

2. Equipment Pull
Once readings hit goal for 24hrs, air movers + dehumidifiers get pulled. Bob won’t yank equipment early to save rental days – insurance pays to dry it right.

3. Final Clean + Sanitization
• HEPA vacuum: All demo debris, dust, affected areas
• Antimicrobial: Applied to studs/decking if Cat 2 or Cat 3 water
• Odor check: If it still smells musty, it isn’t done

4. Documentation Packet
Bob sends you + your adjuster a complete file:
• Photo logs: Before, during, after demo + drying
• Moisture maps: Marked floor plans with readings
• Psychrometric logs: Daily drying data
• Xactimate scope: Line-item of demo + equipment days
• Certificate of Completion: Signed by PM stating IICRC standards met

5. Clearance for Rebuild
Mitigation isn’t complete until Bob signs off that it’s safe to close walls. No builder should hang drywall over wet studs. On mold/Cat 3 jobs, Bob recommends third-party PRV testing before rebuild starts.

What happens next with Bob’s full restoration team
1. Scope approval: Bob meets adjuster to lock rebuild scope
2. Materials selection: You pick flooring, paint, cabinets from samples
3. Permits: City of Edmond pulls as needed
4. Rebuild: Carpenters, painters, flooring crew put it back
5. Final walkthrough: Punch list + warranty signed

Red flags Bob sees from other companies
• Equipment pulled while walls still read wet → mold in 30-60 days
• No moisture logs → adjuster denies coverage
• Demo left dirty → new drywall gets contaminated
• “It feels dry” → not a standard. Meters or it didn’t happen.

Bottom line: Bob doesn’t consider mitigation finished un

FloodOKC.com. . Equipment Pull
Once readings hit goal for 24hrs, air movers + dehumidifiers get pulled. Bob won’t yank equipment early to save rental days – insurance pays to dry it right.

3. Final Clean + Sanitization
• HEPA vacuum: All demo debris, dust, affected areas
• Antimicrobial: Applied to studs/decking if Cat 2 or Cat 3 water
• Odor check: If it still smells musty, it isn’t done

4. Documentation Packet
Bob sends you + your adjuster a complete file:
• Photo logs: Before, during, after demo + drying
• Moisture maps: Marked floor plans with readings
• Psychrometric logs: Daily drying data
• Xactimate scope: Line-item of demo + equipment days
• Certificate of Completion: Signed by PM stating IICRC standards met

5. Clearance for Rebuild
Mitigation isn’t complete until Bob signs off that it’s safe to close walls. No builder should hang drywall over wet studs. On mold/Cat 3 jobs, Bob recommends third-party PRV testing before rebuild starts.

What happens next with Bob’s full restoration team
1. Scope approval: Bob meets adjuster to lock rebuild scope
2. Materials selection: You pick flooring, paint, cabinets from samples
3. Permits: City of Edmond pulls as needed
4. Rebuild: Carpenters, painters, flooring crew put it back
5. Final walkthrough: Punch list + warranty signed

Red flags Bob sees from other companies
• Equipment pulled while walls still read wet → mold in 30-60 days
• No moisture logs → adjuster denies coverage
• Demo left dirty → new drywall gets contaminated
• “It feels dry” → not a standard. Meters or it didn’t happen.

Bottom line: Bob doesn’t consider mitigation finished until he’d be comfortable building back over it in his own house.

Bob runs large desiccant dehumidifiers for big commercial water losses in Edmond + OKC metro.

24/7 Dispatch: 24/ 7
Express Restoration Inc.
FloodOKC.com
What that 10,300 CFM desiccant does

1. Why desiccant vs. regular LGR
Standard LGR dehumidifiers struggle below 70°F or when you need

FloodOKC.com How Bob’s water extraction works

1. Immediate response – Day 0
Truck-mounted extractors pull standing water out fast. For carpet, they use weighted extraction to squeeze water from pad. For hardwood/tile, they use squeegee wands + subfloor drying mats.

2. Remove what can’t be saved
Wet carpet pad, insulation, and drywall that wicked water get torn out on the spot. Bob doesn’t charge to dry material that’s already ruined – saves you time + money.

3. Start drying immediately
Once bulk water is gone, industrial air movers + commercial dehumidifiers go up. They drill weep holes in baseboards and pull toe-kicks under cabinets to get air flow inside walls/cabinets.

4. Moisture mapping
Tech uses thermal cameras + moisture meters to find hidden water behind walls, under floors. Everything gets documented for insurance. Equipment stays until meters read dry to IICRC standards – usually 3-5 days.

Types of water they extract
• Clean water: Supply line breaks, faucet ruptures, sink/toilet overflows
• Gray water: Washing machine, dishwasher drains
• Black water/Cat 3: Sewage backups, storm flood water. Full PPE, antimicrobial, sanitization.

Why Bob for extraction
1. Fast: Local Edmond crew means they’re on site quickly. First 24hrs determines if floors/walls are salvageable.
2. Right equipment: Truckmounts pull 100+ gallons vs shop-vac. Drying mats save hardwood if caught early.
3. No guesswork: Moisture meters decide when you’re dry, not just “feels dry.”
4. Insurance documentation: Photos, readings, itemized scope so your claim goes smooth.

FloodOKC.com

That’s Express Restoration Inc.’s website – Bob Chambers’ company in Edmond.

What you’ll find there:
Express Restoration Inc.
24/7 emergency dispatch

Services Bob lists on FloodOKC.com
1. Water Damage Restoration – Emergency extraction, drying, flood cleanup, burst pipes, slab leaks
2. Fire & Smoke Damage – Board-up, soot removal, odor control, full rebuild
3. Mold Remediation – IICRC certified removal + treatment
4. Storm Damage – Roof tarps, structural dry-out
5. Reconstruction – Drywall, flooring, cabinets, paint – start to finish

Bob runs 24/7 emergency response for Edmond + OKC metro. The site has his direct line and info on insurance billing.

If you’ve got active flooding or water damage right now, don’t wait on the website – Water damage gets more expensive every hour.

Need help getting in touch with him, or were you looking for something specific on the site

30 units flooded Norman Oklahoma If you’ve got water damage and need Bob, here’s the direct rundown:

Bob’s 24/7 Water Damage Response
Bob Chambers personally handles emergency water calls for Express Restoration in Edmond + OKC metro. No answering service at 2am – you get him or his on-call tech.

What Bob does on water jobs

1. Emergency Mitigation – First Hours
• Shuts off/stops source if you haven’t already
• Water extraction with truckmounts + subfloor drying mats
• Pulls baseboards, drills weep holes, starts demo on non-salvageable material
• Sets industrial air movers + dehumidifiers that run 24/7

2. Assessment + Insurance
Bob’s known for honest scopes. He’ll tell you what can be dried vs what needs torn out so you don’t overpay. Documents everything with photos/moisture readings for your adjuster. He works with all carriers.

3. Drying + Monitoring
Crew checks moisture daily in walls, floors, framing with meters. Average dry time is 3-5 days. They won’t pull equipment until it’s actually dry – prevents mold callbacks.

4. Rebuild
Once dry, Express Restoration does the full put-back: drywall, paint, flooring, cabinets, trim. One contractor from wet to complete.

Types of water damage Bob handles
• Supply line bursts – fridge, ice maker, toilet, sink lines
• Faucet ruptures – those flood a house fast
• Slab leaks – detects + accesses, then dries structure
• Storm/flood water – Cat 3 cleanup with proper PPE + antimicrobials
• Sewage backups – full biohazard protocol
• AC leaks, water heaters, roof leaks

Why people call Bob specifically
1. Shows up fast: Lives in Edmond, so response time is quick for nearby calls
2. No BS: Won’t tell you hardwood is salvageable if it’s cupped and black. Won’t tear out cabinets if they can be dried in place.
3. 27 + years experience: Residential + commercial. Knows how to save what’s savable.
4. Insurance savvy: Speaks adjuster language, fights for proper scope.

When Bob’s crews do demolition, PPE isn’t optional. It’s required for safety + insurance compliance. Here’s how they handle it:

Why PPE during demo

1. Water damage / Mold
Wet drywall, insulation, and wood that’s been sitting >48hrs can have mold. Demo kicks spores into the air. OSHA + IICRC S500 standards require protection.

2. Fire / Smoke / Soot
Soot particles are carcinogenic. Disturbed drywall from 80s/90s homes may have asbestos. Charred material = airborne particulates.

3. Sewage / Category 3 Water
If it’s a rupture with contaminated water or backup, you’re dealing with bacteria, viruses. Full biohazard protocol.

4. Dust + Debris
Even “clean” demo creates silica dust from drywall, concrete, tile. Long-term lung hazard.

Standard PPE Bob’s techs wear on gut jobs -Express restoration inc. -FloodOKC.com.
-Oklahoma City and surrounding areas