Baldwin Metals

Our New Quickmill Intimidator can handle any machining job you throw at it. With enough table room to tackle projects up to 120" x 120" x 24" we can bring your biggest project to life! The large table size is just one of the awesome features our new mill has.

While running, it can maintain a continuous torque of 230 ft-lb! The Z-Axis feed thrust is no joke either at 5,000 lbs. The intimidator can quickly complete any job, saving you time and money.

Check out the video from Quickmill to learn more and reach out today if you have a job or project we can help you complete!

Quickmill Intimidator - Large Part Machining Center If you're not drilling on an Intimidator, you're not really drilling. Proven time and time again, the Intimidator will get you drilling faster than you can i...

We have upgraded our machinery! We waved goodbye to our 280 ton Cincinnati press brake and said hello to our new Accurpress Accell Series U. We are so excited to get the electric hooked up and start playing with this massive beauty.
We hired MEI Crating & Rigging to move the press brakes for us as they required two 40/60 Versa-Lift forklift. Each forklift can lift 20 tons with the base retracted and 30 tons with the base extended!
We poured new concrete to ensure a nice new level surface for the new press brake. And after the Accirpress Accell was put in place we secured it with four 1" bolts that were drilled into the concrete. Exciting!

Working on completing this structure!

Like most welders, Adam has found a creative way to label his tools!

Working on these awesome ramps that we designed for a client.

Finishing up a large order of 60-degree duct elbows and cylinders. These will likely be used for A/C ductwork in the ceiling of a building. It is pretty cool working on such a wide variety of projects here!

BEFORE & AFTER on a large basket we are reverse engineering.

All these pipes were cut using the rotary cutter on the plasma. We have posted several videos featuring the rotary plasma cutter. If you are curious, go check them out!

Getting this tank ready for shipping after we welded on some new flanges! Rather than making new tanks we often make changes or fix up existing tanks!

Shipping completed decorative panels to the customer today! We love seeing how the panels turn out after they get powder-coated. After inspecting them, they get packed up and shipped off.
Share your comments and questions below. Let's make something awesome together! Give a follow if you want to see more content like this!

We finished building several new check valve bodies. Each of those holes holds a check valve. A check valve is a valve that normally lets fluid (liquid or gas) flow through it in only one direction.
Share your comments and questions below. Let's make something awesome together! Give a follow if you want to see more content like this!

You get the first peek at some water fountain features hot off the welding table! Completed just today they are ready to be polished up and sent to their new water fountain location! We love thinking about how these pieces will add to the finished landscape.
Share your comments and questions below. Let's make something awesome together! Give a follow if you want to see more content like this!