Detailed Designs Auto Spa

Man, the full monty is so much more involved going from a c7 z06 to the c8 z06. There's ssssso much more car there.

These 997 911 GT3 lug nuts/bolts called for sand blasting to remove the rust and a matching gloss black powder coat.

Understandably, some may ask:
The sockets fit still fit
There was no chipping after being torqued down.

This is the same 997 recently featured on my page. After seeing the finished product for the body and taking it on a drive, the owner, Dave, decided he wanted the wheels and calipers prepped and coated as well. I mentioned addressing the lugs (as you can see in the before shot) as they were unsightly. The rest is history.

Thanks for looking. All copy and content free of AI influence 😎

#997

Everything you see on this 23,000 mile 997.1 911 4S bumper is wrapped with PPF. All of it is custom wrapped with inlays where reliefs are otherwise necessary. All seams are beautifully matched. It's my version of the best I've got in me.

Clearly, I don't post work much anymore. I suppose being low volume and hands-on with every step of every project has its benefits. Energy goes to where it matters most.

Thanks for looking.

#997 #911

Proof you don't need to spend $800k to have something cool.

997 bugging out

Protective film done right on an M Coupe rear bumper.

bra

911 criticality

Came out to this situationship.
..unreal

It's been a very long time since I put a video up. I hope yall enjoy this one about detailing the seats of my FJ62 Land Cruiser.

Full process of detailing a hammered FJ62 fabric seat 1) Tornador w/ low-suds fabric detergentThis flushing dirt away from fabric surface.2) Remove slurry of dirt and liquid with hot water extractor.Hot water al...

12,000 miles were on this M2 when it arrived. "Extensive decon" is an understatement regarding the amount of prep necessary for a clean full body ppf wrap once a car is no longer *new*.

Both edges shown here are wrapped. Only the tail light had to be removed.

Clean, with beautiful fit and finish.