Mokon

Last Chance! Priority Attendee Registration Rate Deadline ends tomorrow October 2, 2026. Register now to save! Visit MOKON at Pack Expo International -- Booth LU-7546 -- October 18-21 in Chicago. We hope to see you there!
https://pei26.nvytes.co/pei2026landing/40M15.html

Join MOKON next month at Pack Expo International in Chicago – October 18-21. Register free with MOKON Code 40M15. Come see our process heating and chilling systems on display including the Orcinus manifold. VISIT US IN BOOTH LU-7546.
https://pei26.nvytes.co/pei2026landing/40M15.html

Meet Ray Cracknell, Senior Engineer. For 33 years, Ray has done it all: building Mokon units, running production, and being part of the engineering process. Learn more about Ray and his career at Mokon in our latest Employee Spotlight: https://blog.mokon.com/october-employee-spotlight-ray-cracknell/

One Complete Solution for Heating and Chilling

Recently, Mokon shipped a custom Full Range system to a customer in the pharmaceutical and medical industry for a vessel application. Engineered around the customer’s specific process requirements, the system provides the temperature control capabilities needed for their application — all within a single integrated solution.

The Mokon Full Range system provides a temperature range of -23°F to 380°F (-31°C to 193°C) and features a custom controller with Ethernet IP communications protocol, E-stop, automatic fill with low water level indication, and overhead piping kit.

One of the biggest advantages of our Full Range system is the ability to heat and chill from a single system. Rather than relying on separate equipment for heating and cooling, a Mokon Full Range system integrates both functions into one coordinated temperature control solution. This can simplify installation, reduce the equipment footprint, and make it easier for operators to manage changing process temperatures.

One system. Two functions. Temperature control engineered around your process.
https://www.mokon.com/products/water-systems/full-range/

Join MOKON next month at Pack Expo International in Chicago – October 18-21. Register free with MOKON Code 40M15. Come see our process heating and chilling systems on display including the Orcinus manifold. VISIT US IN BOOTH LU-7546.
https://pei26.nvytes.co/pei2026landing/40M15.html

Meet Anthony Forth, Oil Product Line Mechanic. Anthony has been part of the Mokon team for almost six years and manufactures our oil-based systems. Read our Employee Spotlight to learn more about him and the hard work he puts into every system:

September Employee Spotlight: Anthony Forth For the month of September, our employee spotlight shines on Anthony Forth, Oil Product Line Mechanic. Anthony has been part of the Mokon team for five years—in fact, he’ll be celebrating his sixth anniversary in October. During that time, Anthony…

What’s the importance of stainless steel and non-ferrous metals in water-based temperature control systems? Our blog goes in-depth on the immense impact of these materials and why we use them in our Duratherm and Hydrotherm systems:

Why Does Material Selection Matter in Water-Based Temperature Control Systems The materials used to construct a water-based temperature control system play a critical role in its performance, reliability, and longevity. At Mokon, we use stainless steel and non-ferrous metals—including copper, brass, and bronze—to help our…

Did You Know Mokon Designs and Manufactures Outdoor Chillers Up to 60 Tons?

When your process requires reliable temperature control in an exterior environment, an outdoor chiller can provide the performance and flexibility you need. Designed specifically for exterior installation, Mokon outdoor chillers are engineered to deliver dependable cooling performance while protecting key components from demanding operating conditions.

A Closer Look at a 10 Ton Outdoor Chiller

Designed for a healthcare technology company, this 10 Ton outdoor chiller incorporates features focused on reliable, efficient operation and convenient system control, including:

Air-Cooled condensing with top air discharge for effective heat rejection and installation flexibility.

Hermetically sealed scroll compressor for dependable refrigeration performance.

Hot gas bypass circuitry to help maintain stable operation under varying load conditions.

Reservoir freeze protection to help protect the system in low temperature conditions.

CPR valve for added refrigeration system protection.

NEMA/Type 4 Outdoor electrical enclosure designed for exterior installation, featuring a main power door disconnect switch, emergency stop, panel heater, and thermostat.

NEMA/Type 12 Indoor electrical enclosure for remote installation, incorporating a microprocessor-based chiller controller with indication and start/stop switch for system operation.

From 1 Ton to 60 Tons

Whether you need a compact 1 Ton system or a larger process cooling solution, Mokon has the engineering and manufacturing capabilities to design and build outdoor chillers to meet your application requirements—with capacities available up to 60 Tons.

Looking for an outdoor chiller for your next process cooling application? Choose a system engineered specifically for exterior installation and built around your process. Choose Mokon for engineered cooling solutions built to deliver dependable process control. https://www.mokon.com/products/centralized-cooling-systems/outdoor-air-cooled-chillers/

Built Around Your Process: Customization & Non-Ferrous Construction

At Mokon, customization goes hand in hand with quality. Our stainless steel components and non-ferrous construction are designed to meet demanding application requirements while providing durability, corrosion resistance, and long-term performance.

Shown here is the exceptional craftsmanship built into this system—and into every system designed and built by Mokon. Features worth highlighting include a brazed-plate steam heat exchanger, a 2.1-gallon stainless steel atmosphere expansion tank, stainless steel wetted surfaces, auto cool and shut down, modulating cooling valve, and much more.

From specialized configurations to material selection, Mokon delivers solutions built around your unique process needs—not a one-size-fits-all approach.

https://www.mokon.com/products/custom-engineered-systems/xchangetherm/

Congratulations to Mark Pastor, our amazing Customer Service Manager, with over 40 years of dedication to Mokon. We are extremely lucky to have you on our team!

Mark, thank you for your commitment, expertise, and all you’ve contributed to Mokon over the years. Here’s to celebrating an outstanding milestone! 👏🎉

One year later, our partnership with orcinus is helping manufacturers take temperature control to the next level. Discover how the orcinus orca and orcinus smartshark integrate with our systems to deliver smarter process monitoring, improved efficiency, and optimized production.

One Year Later: How are Mokon and Orcinus Advancing Temperature Control? One year after forming our partnership, Mokon and orcinus continue to advance temperature control by combining industry-leading thermal management with intelligent process monitoring. As the official U.S. distributor and production partner for…