Titan Applicators LLC

The Titan Applicators LLC team was given some love in the most recent Spray Magazine.



Jake Kluge Bobby Cozine Tony Bock

Spray Foam Insulation & Roofing Magazine - sprayfoam - January 2024 : Page 54 HOW A CHALLENGEHELPED LIFT ANSPF BUSINESS TOA NEW LEVEL OFEXCELLENCE TheCraneGame Contractors are used to weighing up the pros and cons of bidding on projects. However, a job occasionally comes...

Titan Applicators LLC crew doing the final touches on the warehouse floor before the coating installation.

This floor will be getting a 100% epoxy base coat with a polyaspartic top coat (Cape Cod Gray).

It will look sharp once it’s finished!



Bobby Cozine Tony Bock Jake Kluge

Fireproofing structural steel is a method of passive fire protection which passively delays (or prevents) the failure of steel during a building fire.



Bobby Cozine Tony Bock Jake Kluge Albi Protective Coatings

Preparing carbon fiber-reinforced witness panels for quality control testing (per ASTM D3039 and/or ASTM D7565).

Typically, two samples are made at the start of
an 8-hour shift and two more samples are made near the end of the 8-hour shift.

It is best to prepare these samples at the start of a shift using a fresh batch of epoxy and fabric.

Feeler gauges/shims are used to control the thickness of the samples.

The shims are placed along either side of the sample and then a rolling pin is used to flatten the samples.



Jake KlugeBobby CozineTony Bock

Inspecting an EPDM roof is important for identifying and addressing any issues before they become major problems.

👉 Examine the surface for any visible damage, such as punctures, cuts, or tears.

👉 Look for signs of ponding water, which can lead to deterioration over time.

👉 Check for debris, dirt, or vegetation growth that should be cleared.
Seams and Flashings:
👉 Inspect seams for signs of separation, peeling, or adhesive failure.

👉 Check flashings, including those around vents, chimneys, and edges, for any issues.
Edge Details:

👉 Ensure that the edge terminations are secure and not pulling away.

👉 Look for any signs of edge metal corrosion or damage.

👉 Inspect any roof penetrations, like pipes and HVAC units, for signs of damage or loose seals.

👉 Check for proper sealant and flashing around penetrations.

👉 Ensure that the EPDM membrane is securely fastened at the roof's perimeter.

🫶 Regular inspections and maintenance can help extend the lifespan of your EPDM roof.



Jake Kluge Bobby Cozine Tony Bock

30,00 square feet of 2.8 # roofing foam applied at 4 inches in depth.

Vertical surfaces, edges, and penetrations are coated.

The gravel goes on next week as the primary covering.



NCFI Polyurethanes Tony Bock Jake Kluge Bobby Cozine

We were contacted by a rep from another company.

He is unfamiliar with spray foam roofing systems and was looking for input on a hail damaged roof.

One of the benefits of SPF roofs is its’ repairability.

Based on the info provided, this one seems like a pretty simply fix.

Apparently, we don’t see eye-to-eye.

It’s not a game to us Titan Applicators LLC.

Especially when it comes to taking care of the client.

Our mantra: “Creating raving-fan-clients through superior customer service, quality installlations, and continuous reliability.”

❓How would you respond to his comment?

Mr. Murray and his family have seen a lot of growth in NE Colorado over the past 150 years.

But now he and his brother are playing a bigger roll in it.

See what he has to say about using Titan Applicators for his commercial roofing needs.



Tony Bock Jake Kluge

Client Testimonial | Roofing Industrial Buildings | Glen Murray This gentleman has seen A LOT of growth in NE Colorado. In fact, his family has been a part of the growth for many generations. Now, he and his brother own a...