Clean Resources

When replacing CRP Series units, remember that DC Plus manifolds are reusable. You only need to swap out the media container. Simply detach the manifold from the old drum, leaving the inlet lines in place, and reattach it to a new drum. Quick and easy!

You should also replace the manifold’s decompression chamber exhaust filters to maintain optimal venting conditions.

Contact your sales representative or [email protected] if you have questions.

What can you connect to a Clean Resources Oil-Water Separator?

You can connect your air compressors and all downstream devices that discharge condensate. Our units come from the factory with sufficient inlet connections to accommodate every device in your system.

For more information, visit cleanresources.com/ows.

, ,

Has your Clean Resources Oil-Water Separator reached its end of life? No problem! If your registered unit is four years old or less, you qualify for free recycling!

Go to RecycleOilSep.com, enter the number of the registered unit you wish to recycle, complete the contact information, and submit. An RMA ticket will be emailed to you. Attach the RMA ticket to the unit and return it to the address provided. That’s it!

By participating in our free recycling program, the oil and media are repurposed for energy using waste as fuel. This process allows us to produce environmentally responsible products while respecting our natural resources and decreasing landfill usage.

Thank you for partnering with Clean Resources to reduce our carbon footprint and utilize this globally friendly alternative.

For all of the details, visit RecycleOilSep.com.

What secret weapon gives every Clean Resources Oil-Water Separator its lubricant-fighting power?

A proprietary media so advanced, it chemically bonds with oil itself — crushing contaminants down to 10 ppm or less while stopping dangerous emulsions in their tracks!

Can oily villains escape the unstoppable science of Clean Resources? Impossible!

EPA compliance is guaranteed!

Stop oil in its tracks: https://www.cleanresources.com/waterproducts.html

Read the further adventures of IDC-350 Man:
https://www.cleanresources.com/comics/IDC-350-Man.html

𝑻𝒘𝒐 𝒎𝒐𝒓𝒆 𝑺𝒖𝒑𝒆𝒓-𝑷𝑨𝑲𝒔 𝒂𝒓𝒆 𝒘𝒓𝒂𝒑𝒑𝒆𝒅 𝒖𝒑 𝒂𝒏𝒅 𝒓𝒆𝒂𝒅𝒚 𝒕𝒐 𝒔𝒉𝒊𝒑!

When it comes to large compressed air systems and difficult-to-treat condensate, Distributors across the country know there’s no better solution than a Super-PAK Oil-Water Separator from Clean Resources.

Every day, Clean Resources ships condensate management products to Distributors throughout the United States. Their customers continue to choose Clean Resources because our products deliver reliable performance, long service life, and superior condensate treatment compared to competing solutions.

Want to see what sets our products apart?

Visit cleanresources.com/faq

Who’s that crusading through compressor rooms, keeping them clean, safe, and EPA compliant?

𝐖𝐡𝐲, 𝐢𝐭’𝐬 𝐈𝐃𝐂-𝟑𝟓𝟎 𝐌𝐚𝐧!

In this all-new six-part monthly comic strip adventure from Clean Resources, IDC-350 Man faces his greatest foes yet: emulsifying oils, brutal environmental conditions, and the terrifying menace known only as ... Polyglycol!

Can our hero conquer these compressor room villains
before disaster strikes?

𝐓𝐮𝐧𝐞 𝐢𝐧 𝐧𝐞𝐱𝐭 𝐰𝐞𝐞𝐤 𝐭𝐨 𝐟𝐢𝐧𝐝 𝐨𝐮𝐭! 𝐘𝐨𝐮 𝐰𝐨𝐧’𝐭 𝐰𝐚𝐧𝐭 𝐭𝐨 𝐦𝐢𝐬𝐬 𝐢𝐭!

Clean Resources will be closed on Monday, May 25th in observance of Memorial Day.

Please be sure to place all orders by 5 PM CST on Thursday, May 21st for shipment this week. Orders received after 5 PM will be processed Tuesday, May 26th.

[email protected]

CRP Series Oil-Water Separators are easy to maintain, but there are a few tasks you should take care of each year. Keep a Clean Resources Annual Maintenance Kit available so you’re ready when it’s time for upkeep.

Each kit has two exhaust filters and four antimicrobial pouches, enough for a full year. Change the pouch every three months and replace both exhaust filters once a year to keep everything running smoothly.

Contact your sales rep or [email protected] to order your Annual Maintenance Kits today.

Annual Maintenance Video:
On our website: https://www.cleanresources.com/shorts/CRP-yearly-maintenance.html
On YouTube: https://www.youtube.com/watch?v=FeNizjyuP-Y

Lubricants in compressed air condensate can significantly affect how well different oil-water separators perform. This article from Compressed Air Best Practices gives a clear comparison of how different separator types handle various lubricant chemicals.

While some separator technologies may only perform effectively with certain lubricant types, Clean Resources Oil-Water Separators are engineered to remove all compressor lubricants to 10 ppm or less, even when handling mixed lubricant streams from multiple compressors simultaneously.

EPA compliance is guaranteed.

https://www.airbestpractices.com/technology/air-treatmentn2/lubricant-chemistry-and-oilwater-separator-performance?oly_enc_id=9918E6543689H5D

To learn more, visit CleanResources.com or contact the team at [email protected].

Get Your Air Dryers from Clean Resources

In today’s demanding industrial environment, where moisture can wreak havoc on equipment and processes, it is crucial to invest in cutting-edge technology that safeguards your operations.

Clean Resources offers a full line of Next Air & Gas heated, heatless, and refrigerated dryers to protect your compressed air systems from atmospheric moisture. No matter your system capacity or operating conditions, we have a high-quality, dependable air dryer to fit your application.

Contact your sales rep or [email protected] for more information.

CleanResources.com/dryers

, , ,