Foamrock

and a roof, using .

concrete ( ) is an artificial porous stone based on cement, which contains many closed air pores, evenly distributed throughout the volume. It is used for of horizontal planes, as a rough screed, etc. For more than 8 years, we have been improving the technology of foam concrete production and exporting all over the world.

In this video you see an example of using our equipment while and a roof.

📫 Our contacts:

+38(068)944-30-46
http://foamrock.in.ua/
https://www.instagram.com/foamrockukraine/
https://www.facebook.com/FoamconcreteFoamRock/

2 in 1 Insulation and Sloping of the roof by FOAMROCK foam concrete.

In October of last year, we made 2/3 of the roof of the warehouse - a light screed with the formation of water drains with D600 foam concrete (https://www.facebook.com/435683383940939/videos/2743348222562968/?t=32). The roof stood all winter, covered only with a primer! This factor did not appear in any way on the quality of foam concrete.
In early May of this year, we completed a light screed of the remaining part of the roof.

We accelerated the performance of this set of equipment (CSI-10-200) to 16.5 cubic meters per hour. The feed range (taking into account the height of 18m) - 140m. For 10 days, a team of 5 people poured 700 cubic meters of foam concrete, taking into account all the additional work.

Hello.
We made this object in March 2020. Here we poured an interfloor overlap with a profiled sheet of D800 foam concrete 80 mm thick on top of the profiled sheet. 500 m2 of flooring was done in 4 days.

We made insulation of this attic floor in March 2020 with D 180 foam concrete 200 mm thick in 3 hours.

In the winter of 2018, we did the dismantling of the roof of the new production with D250 foam concrete - https://youtu.be/C0xzi9fK9EU
And in November 2019, they did it in one day, they made the canopies unfocused with D300 foam concrete at the same facility.

We made this object in 2016. The formation of a slope-forming layer and the insulation of the roof of the Directorate of Railways of the South Mineral Processing Plant (Metinvest) in two layers: 100 mm D300 and 40 mm D600.

In November 2019, the attic floor of a 3-door access building in Krivoy Rog was insulated with monolithic foam concrete D200 with a layer of 200 mm. The work was completed in 4 days.

In 2017, the trading premises in Zhitomir were insulated with monolithic foam concrete in 2 layers D200 - 200 mm and D600 - 50 mm.