EdanTech Online Store

Arduino Uno R3 l Mega R3 2560 l Nano Every l Nano 33 Sense BLE with Headers Genuine Original Italy
🛒https://go.shopple.co/sp8x8g

As the title suggest the following are the Genuine/ Original Board made from Italy, and not a clone which are usually made in China, though it is more expensive compared to the clones, the board is more robust and will last longer compared to a clone.

*Arduino Uno R3 Italy Genuine
Specs:
- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed

*Arduino Mega 2560 R3 Italy Genuine
Specs:
- ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed

* Arduino Nano Every with Headers
- The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!
- preferred board for many projects requiring a small and easy to use microcontroller board.
- suited for wearable inventions, low-cost robotics, electronic musical instruments, and general use to control smaller parts of a larger projects.
- an evolution of the traditional Arduino Nano board but features a lot more powerful processor, the ATMega4809

*Arduino Nano 33 BLE Sense with Headers
- This board is based on the nRF52480 microcontroller.
- Arduino Nano 33 BLE only supports 3.3V I/Os and is NOT 5V tolerant so please make sure you are not directly connecting 5V signals to this board or it will be damaged. Also, as opposed to Arduino Nano boards that support 5V operation, the 5V pin does NOT supply voltage but is rather connected, through a jumper, to the USB power input.
- The Bluetooth is managed by a NINA B306 module.
- The IMU is a LSM9DS1 and it is managed through I2C.
- The LPS22HB reads barometric pressure and environmental temperature.
- The HTS221 senses relative humidity.
- The ADPS-9960 is a digital proximity, ambient light, RGB and gesture sensor.
- The MP34DT05 is the digital microphone
- Crypto keys are managed by the ATECC608A crypto chip.
- The board has a two 15 pins connectors – one on each side -, pin to pin compatible with the original Arduino Nano.

Arduino Uno R3 l Mega R3 2560 l Nano Every l Nano 33 Sense BLE with Headers Genuine Original Italy | Shopee Philippines Buy Arduino Uno R3 l Mega R3 2560 l Nano Every l Nano 33 Sense BLE with Headers Genuine Original Italy online today! As the title suggest the following are the Genuine/ Original Board made from Italy, and not a clone which are usually made in China, though it is more expensive compared to the clones...

2022 Advance Upgraded Starter Kit compatible with Arduino UNO R3 w/ PDF Manual Lessons DIP
🛒https://go.shopple.co/sp8x8f

Note: Maximum of 2 Kits per order if using Other logistics as a shipping option.

Note: The kit only includes 1x Potentiometer, just a typo on the printed paper.

Please message us for the manual.

Advance Upgraded Starter Kit compatible with Arduino

Learn Advanced Microcontroller Programming with Arduino Compatible UNO R3 DIP
Lots of Sensors Included
Learn the Basics of RFID
Prototyping Ready
Learn from Basic to Advance
Great for Project Starters and Researchers

Packages include the following:
1xUNO R3 Board compatible with Arduino
1xUSB Cable
1x(16x2) LCD with I2C Adapter
1xRC522 Module
1xRFID Card
1xKey Chain
1xJoystick Module
1xKey Board
1xRTC Module
1xWater Level Sensor
1xDHT11 Humidity Sensor
1xRGB Module
1xULN2003 Motor Driver Module
1x28BYJ-48 Stepper Motor
1x1-Channel Relay Module
1xMB-102 Breadboard
65xJumper Wire
10xFemale-Male Jumper Cable
1xSound Sensor Module
1xRemote
1x10K Potentiometer
1x1 Digital Tube
1x4 Digital Tube
1xMatrix Tube
1xSG90 Micro Servo
2xBuzzer
2xBall Switches
3xPhotoresistance
5xTactile Switches with Caps
1x9V Battery Clip with DC Jack
15x5mm LED
30xResistance (220ohm, 1K ohm, 10K ohm)
1xFlame Sensor
1xIR Receiver Sensor
1x74HC595
1xLM35DZ

Shopee Philippines | Shop Online with Promos and Vouchers Note: Maximum of 2 Kits per order if using Other logistics as a shipping option. Note: The kit only includes 1x Potentiometer, just a typo on the printed paper. Please message us for the manual. Advance Upgraded Starter Kit compatible with Arduino Learn Advanced Microcontroller Programming with Ardu...

Arduino Sensor Kit Base
🛒https://go.shopple.co/sp8gt7

Description
To get started with a new thing is always difficult, and we've been thinking about how to make learning electronics and sensing the world around you easier than ever. We are proud to announce the release of the Arduino Sensor Kit - Base, a joint production between Arduino and Seeed. The Arduino Sensor Kit is a plug & play addition to the Arduino Uno to get you started with electronics and programming. It integrates 10 Grove modules on a single PCB, including 5 sensors, an OLED display, and actuators. Best of all, those modules are pre-wired, so no breadboard, no welding, and even no wiring! Proving that hardware doesn’t need to be hard.

Before getting started with the Arduino Sensor Kit, you need to have an Arduino UNO board at your side. Just plug the Arduino Sensor Kit into the Arduino UNO board, then you're ready to go enjoy coding!

Application
Perfect for Arduino beginners start the different Arduino project on one board
Perfect for Steam Education and Online Education
Suitable for getting started with open-source hardware and Arduino coding

10 Sensors and Modules Included in the kit
The Arduino Sensor Kit has exactly the same modules as the Grove Beginner Kit.

*Grove – LED
*Grove – Buzzer
*Grove – OLED Display 0.96″
*Grove – Button
*Grove – Rotary Potentiometer
*Grove – Light
*Grove – Sound
*Grove – Temperature & Humidity Sensor
*Grove – Air Pressure Sensor
*Grove – 3-Axis Accelerator
*6 Grove Cables

Difference between the Grove Beginner Kit
Half a year ago, we released the Grove Beginner Kit for Arduino. It has been one of the most popular products at Seeed. Hundreds of schools and educational institutions adopted the kit as the course material.

Arduino Sensor Kit Base | Shopee Philippines Buy Arduino Sensor Kit Base online today! Description To get started with a new thing is always difficult, and we've been thinking about how to make learning electronics and sensing the world around you easier than ever. We are proud to announce the release of the Arduino Sensor Kit - Base, a joint....

Orange Pi One NEW 1GB H3 Quad-core With Power Cable
🛒https://go.shopple.co/sp8gwh

Orange Pi One NEW 1GB / 512MB H3 Quad-core With Power Cable

What’s Orange Pi One？
It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Raspberry Pi Image, as well as the banana pi Image. It uses the All Winner H3 SoC, and has 512MB DDR3 SDRAM
What can I do with Orange Pi One?
Build… A computer\A wireless server\Games\Music and sounds\HD video\A speaker\Android\Scratch Pretty much anything else, because Orange Pi Plus is open source
Who’s it for?
Orange Pi One is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you.

Orange Pi One 512MB
Features:
1.CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K
2.GPU:Mali400MP2 GPU ·Supports OpenGL ES 2.0
3.Memory: 512MB DDR3 (shared with GPU)
4.Onboard Storage: TF card (Max. 64GB) / MMC card slot
5.Onboard Network: 10/100M Ethernet RJ45
6.Video input: A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to 1080p@30fps
7.Video output:
Supports HDMI output with HDCP
Supports HDMI CEC
Supports HDMI 30 function
Supports simultaneous output of HDMI
8.Power: DC input can supply power, but USB OTG input don’t supply power
9.USB 2.0 ports: Only One USB 2.0 HOST, one USB 2.0 OTG
10.Button:Power Button(SW4)
11.Low-level peripherals: 40 Pins Header,compatible with Raspberry Pi B+
12.LED lights: Power led & Status led
13.Key:POWER
14.Supported operating systems : Android Ubuntu, Debian, Rasberry Pi Image
15.Size:69 mm × 48mm
16.Weight:36g

Orange Pi One 1GB
Features:
1.CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K
2.GPU:Mali400MP2 GPU ·Supports OpenGL ES 2.0
3.Memory: 512MB DDR3 (shared with GPU)
4.Onboard Storage: TF card (Max. 64GB) / MMC card slot
5.Onboard Network: 10/100M Ethernet RJ45
6.Video input: A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to 1080p@30fps
7.Video output:
Supports HDMI output with HDCP
Supports HDMI CEC
Supports HDMI 30 function
Supports simultaneous output of HDMI
8.Power: DC input can supply power, but USB OTG input don’t supply power
9.USB 2.0 ports: Only One USB 2.0 HOST, one USB 2.0 OTG
10.Button:Power Button(SW4)
11.Low-level peripherals: 40 Pins Header,compatible with Raspberry Pi B+
12.LED lights: Power led & Status led
13.Key:POWER
14.Supported operating systems : Android Ubuntu, Debian, Rasberry Pi Image
15.Size:69 mm × 48mm
16.Weight:36g

Orange Pi One NEW 1GB H3 Quad-core With Power Cable | Shopee Philippines Buy Orange Pi One NEW 1GB H3 Quad-core With Power Cable online today! Orange Pi One NEW 1GB / 512MB H3 Quad-core With Power Cable What’s Orange Pi One？ It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, as well as the banana pi Image. It uses ...

Raspberry Pi Kit for STEM Grade 8-10 Students Rpi Kits
🛒https://go.shopple.co/sp8wzw

Kit 1: Basic Kit 1
Inclusions:
1pc/s Raspberry Pi 3 B+
1pc/s HDMI Cable ( 1 meter)
1pc/s Raspberry Pi 3 B+ Heat Sink
1pc/s Sandisk Micro SD Card 16GB
1pc/s Raspberry Pi 3 Power Supply (2.5A)
1pc/s Micro SD Card to USB Adaptor
1pc/s Breadboard 830 points
30pc/s 220 Ohm Resistor
3pc/s Tactile Button (Red, Green, Yellow)
30pc/s LED Regular 5mm (Red, Green, Yellow)
40pc/s Jumper Wire Male to Male 200mm
40pc/s Jumper Wire Male to Female 200mm
2pc/s SG90 Servo Motor

Kit 2: Basic Kit 2
Inclusions:
1pc/s Raspberry Pi 4
1pc/s HDMI Cable ( 1 meter)
1pc/s Raspberry Pi 4 Heat Sink
1pc/s Sandisk Micro SD Card 16GB
1pc/s Raspberry Pi 3 Power Supply (3A)
1pc/s Micro SD Card to USB Adaptor
1pc/s Breadboard 830 points
30pc/s 220 Ohm Resistor
3pc/s Tactile Button (Red, Green, Yellow)
30pc/s LED Regular 5mm (Red, Green, Yellow)
40pc/s Jumper Wire Male to Male 200mm
40pc/s Jumper Wire Male to Female 200mm
2pc/s SG90 Servo Motor

Kit 3: Premium Kit 1
Inclusions:
1pc/s Raspberry Pi 3 B+
1pc/s HDMI Cable ( 1 meter)
1pc/s Raspberry Pi 3 B+ (Aluminum Case)
1pc/s Sandisk Micro SD Card 16GB
1pc/s Raspberry Pi 3 Power Supply (2.5A)
1pc/s Micro SD Card to USB Adaptor
1pc/s Breadboard 830 points
30pc/s 220 Ohm Resistor
3pc/s Tactile Button (Red, Green, Yellow)
30pc/s LED Regular 5mm (Red, Green, Yellow)
40pc/s Jumper Wire Male to Male 200mm
40pc/s Jumper Wire Male to Female 200mm
2pc/s MG966R Servo Motor

Kit 4: Premium Kit 2
Inclusions:
1pc/s Raspberry Pi 4
1pc/s HDMI Cable ( 1 meter)
1pc/s Raspberry Pi 4 (Aluminum Case)
1pc/s Sandisk Micro SD Card 16GB
1pc/s Raspberry Pi 3 Power Supply (3A)
1pc/s Micro SD Card to USB Adaptor
1pc/s Breadboard 830 points
30pc/s 220 Ohm Resistor
3pc/s Tactile Button (Red, Green, Yellow)
30pc/s LED Regular 5mm (Red, Green, Yellow)
40pc/s Jumper Wire Male to Male 200mm
40pc/s Jumper Wire Male to Female 200mm
2pc/s MG966R Servo Motor

Raspberry Pi Kit for STEM Grade 8-10 Students Rpi Kits | Shopee Philippines Buy Raspberry Pi Kit for STEM Grade 8-10 Students Rpi Kits online today! Kit 1: Basic Kit 1 Inclusions: 1pc/s Raspberry Pi 3 B+ 1pc/s HDMI Cable ( 1 meter) 1pc/s Raspberry Pi 3 B+ Heat Sink 1pc/s Sandisk Micro SD Card 16GB 1pc/s Raspberry Pi 3 Power Supply (2.5A) 1pc/s Micro SD Card to USB Adaptor 1...

2022 Advance Upgraded Starter Kit compatible with Arduino UNO R3 w/ PDF Manual Lessons DIP

🛒https://go.shopple.co/sp7riw

Learn Advanced Microcontroller Programming with Arduino Compatible UNO R3 DIP
Lots of Sensors Included
Learn the Basics of RFID
Prototyping Ready
Learn from Basic to Advance
Great for Project Starters and Researchers

Packages include the following:
1xUNO R3 Board compatible with Arduino
1xUSB Cable
1x(16x2) LCD with I2C Adapter
1xRC522 Module
1xRFID Card
1xKey Chain
1xJoystick Module
1xKey Board
1xRTC Module
1xWater Level Sensor
1xDHT11 Humidity Sensor
1xRGB Module
1xULN2003 Motor Driver Module
1x28BYJ-48 Stepper Motor
1x1-Channel Relay Module
1xMB-102 Breadboard
65xJumper Wire
10xFemale-Male Jumper Cable
1xSound Sensor Module
1xRemote
1x10K Potentiometer
1x1 Digital Tube
1x4 Digital Tube
1xMatrix Tube
1xSG90 Micro Servo
2xBuzzer
2xBall Switches
3xPhotoresistance
5xTactile Switches with Caps
1x9V Battery Clip with DC Jack
15x5mm LED
30xResistance (220ohm, 1K ohm, 10K ohm)
1xFlame Sensor
1xIR Receiver Sensor
1x74HC595
1xLM35DZ

2022 Advance Upgraded Starter Kit compatible with Arduino UNO R3 w/ PDF Manual Lessons DIP | Shopee Philippines Buy 2022 Advance Upgraded Starter Kit compatible with Arduino UNO R3 w/ PDF Manual Lessons DIP online today! Note: Maximum of 2 Kits per order if using Other logistics as a shipping option. Note: The kit only includes 1x Potentiometer, just a typo on the printed paper. Please message us for the manu...

https://shopple.co/edanonlineshops
https://shopple.co/edanonlineshops
https://shopple.co/edanonlineshops

Raspberry Pi 3 B+ Model Motherboard RPI 3B+
🛒https://invle.co/clbwx4x

SmartHome BUDOL!!! :D
💡🛒https://invol.co/clbdrzb

Di na kailangang tumayo para i-switch on/off ang ilaw. :D

Pwede ring i-set sa timer o i-schedule ang on/off ng inyong mga ilaw sa bahay.

𝗦𝗢𝗡𝗢𝗙𝗙 𝗦𝗹𝗮𝗺𝗽𝗵𝗲𝗿𝗥𝟮 𝗪𝗶𝗙𝗶 𝗦𝗺𝗮𝗿𝘁 𝗟𝗶𝗴𝗵𝘁 𝗦𝗼𝗰𝗸𝗲𝘁 𝗕𝘂𝗹𝗯 𝗛𝗼𝗹𝗱𝗲𝗿 𝗘𝟮𝟳 𝗟𝗮𝗺𝗽 𝗛𝗼𝗹𝗱𝗲𝗿 𝗪𝗶𝗙𝗶 𝗦𝗺𝗮𝗿𝘁 𝗦𝘄𝗶𝘁𝗰𝗵 𝟰𝟯𝟯𝗠𝗛𝘇 𝗥𝗙/𝗲-𝗪𝗲𝗟𝗶𝗻𝗸 𝗔𝗣𝗣/𝗩𝗼𝗶𝗰𝗲 𝗥𝗲𝗺𝗼𝘁𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝗦𝗺𝗮𝗿𝘁 𝗛𝗼𝗺𝗲 𝗕𝘂𝗹𝗯 𝗛𝗼𝗹𝗱𝗲𝗿

💡🛒https://invol.co/clbdrzb

PisoWifi Business - PisoWifi Custom Board :D

Build your DIY PisoWifi with RaspberryPI. :D