GeoTech - Computer Repair Services

🧰 Taguig Client – CPU & GPU Repaste + GPU Fan Checkup Done 🧰

Another successful service for our Taguig client — full thermal maintenance and GPU fan inspection completed. 💻🔥

The unit came in for routine servicing to ensure stable temperatures and proper cooling performance during gaming and heavy workloads. After full inspection and maintenance, the system is now running efficiently and quietly again. ⚡

Here’s what we did during the service: ✅ Full system thermal inspection and cleaning check
✅ CPU thermal repaste – restored proper heat transfer and stability
✅ GPU thermal repaste – improved cooling performance under load
✅ GPU fan checkup – tested fan spin, RPM response, and noise levels
✅ Airflow verification – ensured proper cooling circulation inside chassis
✅ Final stress testing – confirmed stable temps and performance

💻 Result: From aging thermal paste and reduced cooling efficiency ➜ now refreshed, cooler, and fully stable after CPU & GPU repaste + fan checkup. 🚀

🛠️ Services Offered: • CPU & GPU Thermal Repaste
• GPU Fan Inspection & Cleaning
• PC Preventive Maintenance (PMS)
• Overheating & Thermal Throttling Fix
• Gaming PC Optimization
• Hardware Diagnostics & Testing

📍 Taguig | NCR Home Service / Repair
📩 Message Geotech Computer Repair Services 💻🔧

🧰 Makati Returning Client – No Display Issue Diagnosed & Fixed 🧰

Another returning client from Makati — PC no display issue successfully diagnosed and restored to stable operation. 💻⚡

The unit came in with a “no display” symptom, where the system powers on but shows no output on the monitor. After proper testing and isolation, we found multiple aging-related hardware factors affecting stability.

Here’s what we did during the service: ✅ Initial diagnosis for no display issue (POST / display check)
✅ RAM reseating and slot testing – ensured proper memory detection
✅ System stability testing on boot attempts
✅ Identified signs of aging PSU performance inconsistency
✅ Observed motherboard degradation due to prolonged use
✅ Rechecked connections and hardware seating for stability

💻 Result: System is now back up and running after proper reseating and diagnostics. However, PSU and motherboard show signs of aging/degradation and may require future upgrade for long-term stability. For now, unit is stable and all good after servicing. 🚀

🛠️ Services Offered: • No Display / No Boot Diagnosis
• RAM Troubleshooting & Reseating
• PSU Testing & Replacement Recommendation
• Motherboard Diagnostics
• PC Preventive Maintenance (PMS)
• Hardware Health Check & Optimization

📍 Makati | NCR Home Service / Repair
📩 Message Geotech Computer Repair Services 💻🔧

🧰 Parañaque Client – Home Service CPU Thermal Repaste Done 🧰

Another successful home service call for our Parañaque client — CPU thermal maintenance completed on-site for improved performance and cooling. 💻🔥

The unit was experiencing higher-than-normal temperatures and reduced performance under load. After proper inspection and on-the-spot servicing, the system is now running cooler and more stable. ⚡

Here’s what we did during the home service: ✅ On-site diagnostic check for temperature and performance issues
✅ CPU thermal repaste – improved heat transfer and lowered operating temps
✅ Heatsink reseat & proper mounting pressure adjustment
✅ Dust check and basic internal airflow inspection
✅ Stress testing to ensure stable temps after servicing

💻 Result: From overheating and thermal throttling ➜ now stable, cooler, and properly optimized after CPU repaste. 🚀

🛠️ Services Offered: • Home Service PC/Laptop Repair
• CPU & GPU Thermal Repaste
• Overheating Diagnosis & Fix
• PC Preventive Maintenance (PMS)
• Performance Testing & Optimization
• Hardware Troubleshooting

📍 Parañaque | NCR Home Service
📩 Message Geotech Computer Repair Services 💻🔧

🧰 Manila Client – Laptop GPU & CPU Repaste Service Done 🧰

Another successful service for our Manila client’s laptop — now running cooler, smoother, and more stable after full thermal maintenance. 💻🔥

The unit was serviced due to rising temperatures and performance throttling during heavy use. After proper diagnosis and maintenance, the system is now fully optimized and ready for daily workload and productivity again. ⚡

Here’s what we did to restore performance: ✅ Full diagnostic check to assess thermal and performance issues
✅ CPU thermal repaste – improved heat transfer and stability under load
✅ GPU thermal repaste – reduced high temperatures during heavy tasks and gaming
✅ Internal cleaning – removed dust buildup affecting airflow and cooling efficiency
✅ Thermal system inspection – ensured proper contact and cooling performance
✅ Final testing – confirmed stable temperatures and smooth operation

💻 Result: From overheating and performance drops ➜ now cooler, stable, and fully optimized after GPU & CPU repaste. 🚀

🛠️ Services Offered: • Laptop / Desktop Diagnostics
• CPU & GPU Thermal Repaste
• Overheating Fix & Cooling Optimization
• PC / Laptop PMS (Preventive Maintenance Service)
• Performance Testing & Troubleshooting
• OS Installation & Optimization
• Home Service Available

📍 Manila | Serving NCR
📩 Message Geotech Computer Repair Services 💻🔧

🧰 Parañaque Client – Black Screen / No Boot Fixed (Home Service) 🧰

A client from Parañaque availed our home service after their PC wouldn’t boot and kept getting stuck on a black screen. 🖥️⚠️

During diagnosis, we found multiple issues affecting system stability and boot performance:
🔹 Corrupted operating system causing startup failure
🔹 DRAM-less SSD showing slower and inconsistent performance, affecting boot responsiveness
🔹 Dust buildup inside the system needing maintenance
🔹 Dried thermal paste on both CPU and GPU affecting cooling performance

Here’s what we did:
✅ Full system diagnosis – checked hardware and software to properly identify the cause of the black screen issue
✅ PC PMS / deep cleaning – cleaned internal dust buildup to restore airflow and maintain component health
✅ CPU thermal repaste – replaced old thermal paste to improve cooling and system stability
✅ GPU repaste – restored proper heat transfer to improve temperatures during use
✅ Fresh OS installation – installed a clean operating system to remove corruption and restore stable booting
✅ Microsoft Office 365 installation – prepared the PC for productivity and daily work use
✅ System optimization & testing – ensured proper boot, stable temperatures, and smoother overall performance

💻 Result:
The PC is now booting properly, running smoother, and fully usable again, with refreshed thermals and a clean system setup. 🚀

🛠️ Services Offered:
• No Boot / Black Screen Diagnosis
• PC PMS / Deep Cleaning
• CPU & GPU Thermal Repaste
• OS Installation & Recovery
• Microsoft Office Installation
• Slow PC & SSD Diagnosis
• Hardware Diagnostics & Testing
• Home Service Available

📍 Parañaque | Serving NCR
📩 Message Geotech Computer Repair Services 💻🔧

🧰 Returning Client – PC Slowdown Fixed with Full Maintenance 🧰

A returning client availed our service after noticing their PC had been slowing down over time, affecting overall performance and responsiveness. 💻⚠️

During inspection, we found:
🔹 Dust buildup inside the system affecting airflow and cooling
🔹 Dried thermal paste on both the CPU and GPU, leading to higher temperatures and reduced performance
🔹 Thermal buildup likely contributing to the slowdown during use

Here’s what we did:
✅ Full PC deep cleaning – removed dust buildup to restore airflow and keep components running cooler
✅ CPU thermal repaste – replaced dried thermal paste to improve cooling and maintain stable temperatures
✅ GPU repaste – restored proper heat transfer to reduce temps and improve performance under load
✅ Internal inspection & maintenance – checked overall system condition during servicing
✅ System testing & monitoring – verified stable temperatures and smoother performance after maintenance

💻 Result:
The PC is now cleaner, cooler, and running smoother again, with improved thermals and restored performance. 🚀

🛠️ Services Offered:
• PC Deep Cleaning & Maintenance
• CPU & GPU Repasting
• Slow PC Diagnosis & Performance Boost
• Overheating & Thermal Throttling Fix
• Hardware Diagnostics & Testing
• Home Service Available

📩 Message Geotech Computer Repair Services 💻🔧

🧰 Client – Frequent Blue Screen (BSOD) Issue Fixed 🧰

A client availed our service due to their PC constantly experiencing blue screen (BSOD) errors, affecting stability and everyday use. 💻⚠️

During diagnosis, we found multiple issues causing the problem:
🔹 Corrupted operating system files leading to crashes and instability
🔹 Dried thermal paste causing poor cooling and higher operating temperatures
🔹 System instability caused by both software and thermal-related issues

Here’s what we did:
✅ Full system diagnosis – checked both hardware and software to properly identify the cause of repeated BSODs
✅ CPU thermal repaste – replaced dried thermal paste to restore proper cooling and prevent overheating-related instability
✅ Fresh OS installation – installed a clean operating system to remove corruption and restore system reliability
✅ Driver check & system setup – ensured proper functionality after reinstall
✅ System optimization & testing – performed stress tests and monitoring to confirm system stability and no more crashes

💻 Result:
The PC is now stable, cooler, and running smoothly again, with the blue screen issues fully resolved. 🚀

🛠️ Services Offered:
• Blue Screen (BSOD) Diagnosis & Fix
• CPU / GPU Thermal Repaste
• OS Installation & System Recovery
• Overheating & Stability Troubleshooting
• Driver Installation & Optimization
• Hardware Diagnostics & Stress Testing
• Home Service Available

📩 Message Geotech Computer Repair Services 💻🔧

🧰 Makati Client – System Instability & Burnt Smell During Rendering Fixed 🧰

A client from Makati availed our service after experiencing system instability and a burnt smell while rendering architecture projects. 💻🔥⚠️

During diagnosis, we found the main cause of the issue:
🔹 Dried thermal paste causing poor heat transfer and very high temperatures
🔹 Intel stock cooler struggling to handle heavy rendering workloads from architecture software
🔹 System overheating leading to instability during long rendering sessions

Here’s what we did:
✅ Full system diagnosis – checked temperatures and identified overheating as the main cause of instability
✅ CPU thermal repaste – replaced dried thermal paste to restore proper cooling and heat transfer
✅ Cooling optimization – adjusted and ensured proper cooler contact for better thermal performance
✅ Stress testing & monitoring – tested temperatures under load to ensure stability during rendering tasks
✅ Performance check – verified the system can now handle demanding architecture workloads more reliably

💻 Result:
The PC is now stable, running cooler, and no longer overheating during rendering, with the burnt smell issue resolved. 🚀

🛠️ Services Offered:
• Overheating & Thermal Throttling Fix
• CPU Thermal Repasting
• System Stability Diagnosis
• Rendering / Workstation Optimization
• Hardware Diagnostics & Stress Testing
• PC Maintenance & Troubleshooting
• Home Service Available

📍 Makati | Serving NCR
📩 Message Geotech Computer Repair Services 💻🔧