PinoyUpgrade

10pcs Upgrade heat resistant shaft spacer for 460-480 /Gelsoft/AEG/ DC motor

Dimensions:

•Outer Diameter: 5.50mm
•Inner hole Diameter: 3.10mm
•Thickness: 0.50mm
•Product Color: Yellow

Temperature celsius can withstand:
(50C°~ 100C°)

The main function of this shaft spacer is to keep the armature rotating permanently between the two stator magnets inside the dc motor so that the magnetic field is better. it also improves the performance of a dc motor when working

Php150

Lithium-ion 11.1V 1200mAh Airsoft battery with charger

Specifications:

•Maximum Voltage: 12.6V
•Nominal Capacity: 1200mAh
•Current Amperage: 10A con - 20A burst
•Discharge Energy: 13.32Wh
•Input charger cell cable: 3cells/22AWG
•Output plug cable: XT Deans/16AWG
•Battery weight: 83g
•Battery type tootsie: 10.5cm Length/2cm Width
•Battery spring can be pull: Sp110 - Sp130Max
•Battery working temperature: (35°C~42°C)
•Battery charging time: 1hour and 30minutes
with 12V 1A computerized balancer charger

Php1550

PM lang sa gustong bumili

PM lang sa gustong umorder.

Lithium-ion 11.1V 3000mAh Airsoft battery

Specifications:

•Maximum Voltage: 12.6V
•Nominal Capacity: 3000mAh
•Current Amperage: 20A con - 40A burst
•Discharge Energy: 33.3Wh
•Input charger cell cable: 3cells/22AWG
•Output plug cable: XT Deans/16AWG
•Battery weight: 144g
•Battery type stick: 19.7cm Length/2cm Width
•Battery spring can be pull: Sp110 - Sp160Max
•Battery working temperature: (35°C~40°C)
•Battery charging time: 2hour and 30minutes with 12V 1A computerized balancer charger

Php1450

Reinforced Roller hammer for WE G***k series

This design is made to prevent damage to the blowback housing, it also protects the hammer from damage, it is also made to improve the Recoil movement of the upper slide and the material used for better performance results is made lighter weight scale compared to a normal stock steel roller.

Made by: Aluminum T6/ High impact strength plastic

Reinforced Roller hammer V3 for WE G***k series

This design is made to prevent damage to the blowback housing, it also protects the hammer from damage, it is also made to improve the Recoil movement of the upper slide and the material used for better performance results is made lighter weight scale compared to a normal stock steel roller.

Description
Martial: High impact strength plastic
Product weight: 0.30g
Easy to install

Effective fluid cleaner

Fluid cleaner for Airsoft AEG GBB units | Shopee Philippines Buy Fluid cleaner for Airsoft AEG GBB units online today! Good for: Aluminum/Alloy zinc/Brass/Steel/Nylon plastic/Rubber O rings/silicone Rubber/ Fiberglass Guidelines: keep out of reach of children this fluid is flammable - Enjoy best prices with free shipping vouchers.

Available now. Order na

2.0 Guide rod kit for WE G***k 18c Airsoft | Shopee Philippines Buy 2.0 Guide rod kit for WE G***k 18c Airsoft online today! Made by Aluminium T6 with 9Ball rotating bearings, it is design to reduce the friction between the guide rod and the recoil spring, the result is fast & sharp blowback reaction and lower the gas consumption. Xtreme Fast target acquisitions...

RS 2.0 Guide rod kit. Available now

Php1,100

Silicone Lubricant grease | Shopee Philippines Buy Silicone Lubricant grease online today! Material:Silicone Teflon Weight:15g Specification: Evaporation Loss:02% Oil separation:03% - Enjoy best prices with free shipping vouchers.

Direct message my page to buy this product.