JannelDesigns

a technical architectural section, a specialized type of drawing that provides a "cut-through" view of a building to show how different materials and systems fit together. It specifically highlights a sustainable water management system integrated into a modern residential or commercial structure.
Here is a detailed breakdown of the components shown:

1. THE ROOF AND DRAINAGE SYSTEM
The top of the diagram illustrates how water is collected and diverted:
• Gutter: A metallic trough at the edge of the roof captures rainwater.
• Cedar Soffit: The underside of the roof overhang is finished with warm-toned cedar wood slats, providing a natural aesthetic contrast to the industrial metal.
• Rain Chain: Instead of a traditional closed downspout, a vertical chain hangs from the gutter. This serves a dual purpose: it guides water downward via surface tension (preventing splashing) and creates a visual, sculptural water feature during rain.

2. THE LIVING SPACE AND FOUNDATION
The left side of the image shows the transition from the building to the ground:
• Structure: A vertical wood-clad wall sits atop a concrete foundation.
• Concrete Slab: The floor is a solid concrete slab that extends outward to form a patio or walkway.
• Wood Bench: A heavy timber bench is cantilevered or attached to the concrete retaining wall, providing a seating area overlooking the garden element.

3. THE STORMWATER PLANTER (BIORETENTION CELL)
The most technical part of the image is the cross-section of the planter on the right. This is designed for LID (Low Impact Development):
• Filtration Layers: The planter is filled with specific layers—topsoil and plants at the surface, followed by a thick layer of gravel or crushed stone below.
a technical architectural section, a specialized type of drawing that provides a "cut-through" view of a building to show how different materials and systems fit together. It specifically highlights a sustainable water management system integrated into a modern residential or commercial structure.
Here is a detailed breakdown of the components shown:

1. THE ROOF AND DRAINAGE SYSTEM
The top of the diagram illustrates how water is collected and diverted:
• Gutter: A metallic trough at the edge of the roof captures rainwater.
• Cedar Soffit: The underside of the roof overhang is finished with warm-toned cedar wood slats, providing a natural aesthetic contrast to the industrial metal.
• Rain Chain: Instead of a traditional closed downspout, a vertical chain hangs from the gutter. This serves a dual purpose: it guides water downward via surface tension (preventing splashing) and creates a visual, sculptural water feature during rain.

2. THE LIVING SPACE AND FOUNDATION
The left side of the image shows the transition from the building to the ground:
• Structure: A vertical wood-clad wall sits atop a concrete foundation.
• Concrete Slab: The floor is a solid concrete slab that extends outward to form a patio or walkway.
• Wood Bench: A heavy timber bench is cantilevered or attached to the concrete retaining wall, providing a seating area overlooking the garden element.

3. THE STORMWATER PLANTER (BIORETENTION CELL)
The most technical part of the image is the cross-section of the planter on the right. This is designed for LID (Low Impact Development):
• Filtration Layers: The planter is filled with specific layers—topsoil and plants at the surface, followed by a thick layer of gravel or crushed stone below.

Buhos Day BTS | Thank you Lord for a warm and sunny weather ☀️

JBT-RESIDENCE | Ground Breaking 🪏

instructional graphic titled "TYPES OF BALCONIES." It uses 3D architectural renders to illustrate four common structural variations of balconies found in modern building design.
Each example is presented as a section of a gray concrete wall with a glass sliding door and a metal safety railing.

1. FULLY RECESSED BALCONY
• Description: The entire floor area of the balcony is set inside the footprint of the building.
• Visuals: Two people are standing in a shaded, inset space. Because it is protected by the building's outer walls on three sides and a ceiling above, it offers the most privacy and weather protection.

2. JULIET BALCONY
• Description: This is a "false" balcony that consists primarily of a railing placed directly outside a window or sliding door.
• Visuals: There is no actual floor space to walk out onto. Its primary purpose is to allow large doors to be opened for light and ventilation while maintaining safety.

3. CANTILEVER BALCONY
• Description: The balcony floor projects straight out from the face of the building without any visible external supports like pillars.
• Visuals: A man stands on a platform that "hovers" over the edge. These are usually supported by internal beams (joists) that extend from the building's structure.

4. SEMI-RECESSED BALCONY
• Description: A hybrid design where a portion of the balcony is tucked inside the building line, while the rest extends outward.
• Visuals: A man stands on a platform that is halfway in and halfway out. This design attempts to balance the privacy of a recessed balcony with the open-air feel of a cantilevered one.

The bedroom and its afternoon view.
A woman’s touch is always mandatory.

Jhoanna & Denver Vlogs | AsvestiPaint 🌷

Congratulations to the new home owners Jhoanna & Denver Vlogs! Create as many memories as you need in your personal sanctuary.

Thank you for trusting our vision. ☺️

For Your Plans and Designs Get An Architect

Small details matter ✨ Before ➡️ After 🎶 Music used is for entertainment purposes only. No copyright infringement intended.

𝗔𝗡𝗢 𝗔𝗡𝗚 𝗦𝗜𝗡𝗔𝗦𝗔𝗕𝗜 𝗡𝗚 𝗡𝗔𝗧𝗜𝗢𝗡𝗔𝗟 𝗕𝗨𝗜𝗟𝗗𝗜𝗡𝗚 𝗖𝗢𝗗𝗘 𝗧𝗨𝗡𝗚𝗞𝗢𝗟 𝗦𝗔 𝗩𝗘𝗡𝗧 𝗦𝗛𝗔𝗙𝗧 𝗦𝗔 𝗣𝗔𝗚𝗜𝗧𝗔𝗡 𝗡𝗚 𝗗𝗔𝗟𝗔𝗪𝗔𝗡𝗚 𝗣𝗥𝗢𝗣𝗘𝗥𝗧𝗬?
Sa mga dikit-dikit na bahay, lalo na sa urban areas, madalas marinig ang tanong na:
“Pwede ba ang bintana o vent shaft sa pagitan ng dalawang properties?”
Ayon sa National Building Code of the Philippines (P.D. 1096), pinapayagan ang vent shaft, pero may malinaw na minimum requirements para maging valid ito bilang source ng liwanag at bentilasyon.

𝗔𝗬𝗢𝗡 𝗦𝗔 𝗡𝗕𝗖𝗣 – 𝗦𝗲𝗰𝘁𝗶𝗼𝗻 𝟴𝟬𝟵 (𝗩𝗲𝗻𝘁 𝗦𝗵𝗮𝗳𝘁𝘀)
• Minimum area ng vent shaft
– 0.10 sq.m. para sa bawat 1 metro ng taas
– Pero kahit gaano pa kababa, hindi pwedeng bababa sa 1.00 sq.m.
• Minimum lapad o sukat
– 600 mm minimum sa kahit anong direction
Ibig sabihin, hindi pwede ang sobrang kipot na “singit” lang.
• Dapat bukas sa itaas
– Ideally open to the sky
– Kung hindi fully open, dapat may skylight o fixed louvers para makapasok ang hangin at liwanag

𝗠𝗔𝗛𝗔𝗟𝗔𝗚𝗔𝗡𝗚 𝗣𝗔𝗔𝗟𝗔𝗟𝗔
Ang vent shaft ay hindi shortcut sa setback at hindi rin easement.
Dapat ito ay nasa loob ng sariling property at malinaw na ipinapakita sa approved building plans.

𝗔𝗡𝗚 𝗧𝗢𝗧𝗢𝗢
Hindi sapat na “may butas para sa hangin.”
Kung kulang ang sukat ng vent shaft, hindi ito ikokonsidera ng building official bilang valid ventilation opening—kahit may bintana pa.

Sa tamang design, ang vent shaft ay simple pero malaking tulong sa comfort at legality ng bahay.

“𝗖𝗵𝗿𝗶𝘀𝘁𝗺𝗮𝘀 𝗶𝘀 𝗮 𝘀𝗲𝗮𝘀𝗼𝗻 𝗻𝗼𝘁 𝗼𝗻𝗹𝘆 𝗼𝗳 𝗿𝗲𝗷𝗼𝗶𝗰𝗶𝗻𝗴 𝗯𝘂𝘁 𝗼𝗳 𝗿𝗲𝗳𝗹𝗲𝗰𝘁𝗶𝗼𝗻.”

And with that, we extend our heartfelt appreciation to all our clients, construction team, apprentices, suppliers, and colleagues in the industry. Thank you for making this year productive and meaningful.

Merry Christmas and Happy New Year! ✨
May the divine blessings remain upon us in the years ahead.