GPL Trading OPC

Sporty design, low cut shoe, combining ergonomics and comfort

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

Low cut shoe with Panoflex technology for better torsion control and walking stability

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

Low-cut shoe with a sporty design, combining the highest level of performance with long-lasting comfort

Contact us:
Email: [email protected]

Phone no: 0917-5090-345
0922-8039-869

FLAT BARS are versatile, solid rectangular metal bars used in structural, industrial, and decorative applications, commonly supplied in 6-meter lengths. They are specified by material A36 mild steel, stainless steel 304/316, width 12- 150mm and thickness 2-33mm+. Standard sizes often range from 20mm x 3mm up to 300mm x 25mm, with hot-rolled being the most common, cost-effective finish.

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

STEEL SHEET PILE is widely used in large and small waterfront structures. Steel Sheet Piles are rolled steel sections consisting of a plate called the web with integral interlocks on each edge. The interlocks consist of a groove, one of whose legs has been suitably flattened

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

I-BEAM Standard I-beams (S-Beams) feature tapered fl**ges for structural strength, commonly ranging from 3 to 24 inches in depth . They are specified by nominal depth (inches) and weight, fl**ge widths spanning 2.33 to 12 inches.

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

STEEL PIPES nominal Pipe Size (NPS) or Diameter Nominal (DN), wall thickness (Schedule 40, 80, STD, XS), material grade (e.g., ASTM A53/A106/API 5L), and length. Common dimensions range from 1/2" to 12" (21.3mm-323.9mm OD) with thicknesses from 0.8-10.0mm, often for pressures up to 350°C.

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

MILD STEEL (MS) plates are low-carbon, highly weldable, and ductile steel plates used in construction and fabrication, commonly adhering to ASTM A36 or IS 2062 E250 standards. Standard sizes often range from 1.2mm to 100mm in thickness, with typical widths of 4–8 ft and lengths of 20 ft. They are ideal for structural frames, machinery, and general fabrication.

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869

ANGLE BARS (L-bars) are hot-rolled, L-shaped structural steel, commonly manufactured in sizes from 20mm x 20mm to 100mm x 100mm, with thicknesses ranging from 2mm to 12mm. They are typically made from ASTM A36 mild steel, come in standard 6-meter lengths, and can be equal or unequal, often featuring a galvanized coating for corrosion resistance.

Contact us:
Email: [email protected]
Phone no: 0917-5090-345
0922-8039-869