WTech Mobile Solution

Oppo A57 Pattern remove with UMT Pro Qcfire tool.

Operation : Format FS
Checking for existing devices...Found
Port : COM5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_009.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8937, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO OPPO A57 [msm8937]
Software : A57_11_A.19_170424, eng.root.20170821.111431 [Mon Aug 21 11:19:07 CST 2017]
Android Ver. : 6.0.1
Preparing Data...Done
Formatting Userdata...Done
Finalizing...Done
Operation Finished.
Module Ver. 1.3

MI Note 4 FRP Removed by Volcano Tool.

BST V3.42.00 Version Download

Google Drive - Virus scan warning

unlock
J1 6 network unlock

P50 Read Info by Cm2

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D4200A6FDE00433E9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D4200A6FDE00433E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x66D7CAFB6B459D49F84A0D67E4A8467D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!

frp remove
frp bypass
frp remove in 3 second by z3x

Operation: Reset FRP/React/EE
Selected model: SM-A800I
Software version: 29.6

Searching Samsung USB Flash interface... COM3 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.6

F5 Flash File
F5 Firmware
CPH1723

Unbrick,
Demo Live,
Patternlock…
fix hang logo,
full file flash

Google Drive - Virus scan warning filerom.net)CPH1723_11_A.02_171021.rar (3.5G) is too large for Google to scan for viruses. Would you still like to download this file?

http://forum.gsmhosting.com/vbb/f453/samsung-tool-pro-29-7-update-first-world-new-shannon-based-phones-read-codes-2285419/

Samsung Tool PRO 29.7 Update. First in the world New SHANNON based phones read codes.

After months of research we present new 1st world exclusive solution for read codes from SHANNON cpu based new phones. - First in the world
Important thing: KNOX must be 0!!! If knox = 1 you can not read codes!!!!!

Added:

- support SM-J727A (Flashing, Backup/Write EFS, Backup/Write CERT, Unlock (Root), Direct Read codes via Server, Repair, patch CERT(repair network), reboot download/recovery) - First in the world
- support SM-J727AZ (Flashing, Backup/Write EFS, Backup/Write CERT, Unlock (Root), Direct Read codes via Server, Repair, patch CERT(repair network), reboot download/recovery) - First in the world
- support SM-J727S (Flashing, Backup/Write EFS, Backup/Write CERT, Unlock (Root), Direct Read codes via Server, Repair, patch CERT(repair network), reboot download/recovery) - First in the world
- support SM-J727U (Flashing, Backup/Write EFS, Backup/Write CERT, Unlock (Root), Direct Read codes via Server, Repair, patch CERT(repair network), reboot download/recovery) - First in the world
- support SM-T395N (Flashing, Backup/Write EFS, Backup/Write CERT, Unlock (Root), Direct Read codes via Server, Repair, patch CERT(repair network), reboot download/recovery) - First in the world
- support SC-04J (Flashing, Backup/Write EFS, Backup/Write CERT, Unlock (Root), Direct Read codes via Server, Repair, patch CERT(repair network), reboot download/recovery) - First in the world

- support SM-A720S (Flashing, Read/Write EFS, Unlock via MSL, Direct READ codes via server, reboot download/recovery) - First in the world
- support SM-N950F (Flashing, Read/Write EFS, Unlock via MSL, Direct READ codes via server, reboot download/recovery) - First in the world
- support SM-N950N (Flashing, Read/Write EFS, Unlock via MSL, Direct READ codes via server, reboot download/recovery) - First in the world
- support SM-J327W (Flashing, Read/Write EFS, Unlock via MSL, Direct READ codes via server, reboot download/recovery) - First in the world
- support SM-J330N (Flashing, Read/Write EFS, Unlock via MSL, Direct READ codes via server, reboot download/recovery) - First in the world

- support SM-A320F (Direct read codes via server) - First in the world
- support SM-A320FL (Direct read codes via server) - First in the world
- support SM-A320Y (Direct read codes via server) - First in the world
- support SM-A520F (Direct read codes via server) - First in the world
- support SM-A520K (Direct read codes via server) - First in the world
- support SM-A520L (Direct read codes via server) - First in the world
- support SM-A520S (Direct read codes via server) - First in the world
- support SM-A520W (Direct read codes via server) - First in the world
- support SM-A720F (Direct read codes via server) - First in the world
- support SM-G390F (Direct read codes via server) - First in the world
- support SM-G390Y (Direct read codes via server) - First in the world
- support SM-G390W (Direct read codes via server) - First in the world
- support SM-G570F (Direct read codes via server) - First in the world
- support SM-G570M (Direct read codes via server) - First in the world
- support SM-G570Y (Direct read codes via server) - First in the world
- support SM-G610K (Direct read codes via server) - First in the world
- support SM-G610L (Direct read codes via server) - First in the world
- support SM-G610M (Direct read codes via server) - First in the world
- support SM-G610S (Direct read codes via server) - First in the world
- support SM-G610Y (Direct read codes via server) - First in the world
- support SM-G950F (Direct read codes via server) - First in the world
- support SM-G950N (Direct read codes via server) - First in the world
- support SM-G955F (Direct read codes via server) - First in the world
- support SM-G955N (Direct read codes via server) - First in the world
- support SM-J326AZ (Direct read codes via server) - First in the world
- support SM-J327A (Direct read codes via server) - First in the world
- support SM-J327AZ (Direct read codes via server) - First in the world
- support SM-J327U (Direct read codes via server) - First in the world
- support SM-J330F (Direct read codes via server) - First in the world
- support SM-J330FN (Direct read codes via server) - First in the world
- support SM-J330G (Direct read codes via server) - First in the world
- support SM-J330L (Direct read codes via server) - First in the world
- support SM-J530F (Direct read codes via server) - First in the world
- support SM-J530FM (Direct read codes via server) - First in the world
- support SM-J530G (Direct read codes via server) - First in the world
- support SM-J530GM (Direct read codes via server) - First in the world
- support SM-J530K (Direct read codes via server) - First in the world
- support SM-J530L (Direct read codes via server) - First in the world
- support SM-J530S (Direct read codes via server) - First in the world
- support SM-J530Y (Direct read codes via server) - First in the world
- support SM-J530YM (Direct read codes via server) - First in the world
- support SM-J701F (Direct read codes via server) - First in the world
- support SM-J701M (Direct read codes via server) - First in the world
- support SM-J701MT (Direct read codes via server) - First in the world
- support SM-J730F (Direct read codes via server) - First in the world
- support SM-J730FM (Direct read codes via server) - First in the world
- support SM-J730G (Direct read codes via server) - First in the world
- support SM-J730GM (Direct read codes via server) - First in the world
- support SM-J730K (Direct read codes via server) - First in the world
- support SM-P585 (Direct read codes via server) - First in the world
- support SM-P585M (Direct read codes via server) - First in the world
- support SM-P585N0 (Direct read codes via server) - First in the world
- support SM-P585Y (Direct read codes via server) - First in the world
- support SM-P587 (Direct read codes via server) - First in the world
- support SM-P588C (Direct read codes via server) - First in the world
- support SM-T395 (Direct read codes via server) - First in the world

GUI changes:
- Fixed closing software after DB compact
- Removed "Solution" (Diagnostic data for server)
- Black skin improvements
- Link Login to current Card
(This function added for protect LOGIN/PASS from using on other CARD )

ATTENTION: PLEASE DON’T LOSE YOUR TIME WITH SHANNON PHONES IF KNOX=1.
IF KNOX=1 phone just will not answer on command. READ CODES AT THIS MOMENT NOT POSSIBLE IF KNOX=1!!!

CREDITS POLICY CHANGES:

From today the minimum pack - 30credits:
Success Read Codes Shannon phones: 5 credits.
Success Read Codes Qualcomm phones: 4 credits MEGA PROMO. ( from 00h-00m ,11 november to 13 november 23h-59m. TIME: GMT+2)
Success Read Codes Qualcomm phones: 5 credits FROM 14 november 00h-00m. TIME: GMT+2

CREDITS RESELLERS HERE

Like usually new solution may have small bug, which will be fixed shortly.
Bug report welcome.

Samsung Tool PRO 29.7 Update. First in the world New SHANNON based phones read codes. - GSM-Forum Samsung Tool PRO 29.7 Update. First in the world New SHANNON based phones read codes. After months of research we present new 1st world exclusive

UAT Updated. Download Now

http://forum.gsmhosting.com/vbb/f1019/uni-android-tool-uat-version-8-02-released-12-11-2017-a-2285948/

http://forum.gsmhosting.com/vbb/f723/inferno-mtk-1-4-2-worlds-1st-mtk6570-frp-remove-imei-repair-screen-lock-much-more-2285920/

http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Lenovo/

http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Micromax/

http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Motorola/

http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Nokia/

http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Oppo/

http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Zte/

Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/Lenovo/

MTK Manual Boot Files :
1.http://www.mediafire.com/file/6cunzaijulrxzir/CRO_L02_Boot.bin

2.http://www.mediafire.com/file/7s0e1c9mnmki1dh/CRO_L03_Boot.bin

3. http://www.mediafire.com/file/o65ruoya1eoq65m/CRO_L22_boot.bin

4. http://www.mediafire.com/file/aqoh07858p61107/CRO_L23_Boot.bin

5. http://www.mediafire.com/file/vb5ws29aaubhy2x/CRO_U00_Boot.bin

6. http://www.mediafire.com/file/sfr5c2w38o71133/CUN_L21_Boot.bin

7. http://www.mediafire.com/file/zpphf1ss8a2olo2/CUN-L22_Auth.auth
http://www.mediafire.com/file/2kzszugymcd3m6m/CUN_L22_Boot.bin

8. http://www.mediafire.com/file/u88skhgkjv03zhg/CUN-U29_Boot.bin

9. http://www.mediafire.com/file/jwgshmomdhp7ath/G730_U10_Boot.bin

10. http://www.mediafire.com/file/1xu18fpb8qbgkz1/LUA_L01_Boot.bin

11. http://www.mediafire.com/file/baggsj84h2diqq7/LUA-L22_Boot.bin

12. http://www.mediafire.com/file/l72wok8pey7x061/LUA_L22_Boot.bin

13. http://www.mediafire.com/file/g414p0x01xr1s1q/MYA-L02_FRP_BOOT.bin

14. http://www.mediafire.com/file/1ss8lasqtna2dlb/MYA-L03_FRP_Boot.bin

15. http://www.mediafire.com/file/csvcbz7b336hyk1/MYA-L11_FRP_Boot.bin

16. http://www.mediafire.com/file/ggeoie4dqp73c3i/MYA-L22_FRP_Boot.bin

17. http://www.mediafire.com/file/hp390ee92f62e2a/MYA-L23_FRP_Boot.bin

18. http://www.mediafire.com/file/dz08zeqiuskaflp/MYA-L41_FRP_Boot.bin

19. http://www.mediafire.com/file/63llm2es7yawk8v/Intex_Elyt_e7_Boot.bin

20.

CRO_L02_Boot.bin MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.