SDC Verifier

🔍 𝗪𝗵𝗮𝘁 𝗶𝘀 𝘁𝗵𝗲 𝗰𝗼𝘀𝘁 𝗼𝗳 𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗻𝗴 𝗳𝗼𝗿 𝗰𝗼𝗱𝗲 𝗰𝗵𝗲𝗰𝗸𝗶𝗻𝗴?

Many engineering teams already have their own scripts for post-processing and code checking. Scripts are excellent for research, automation, and solving specific engineering problems.

But when it comes to code analysis, the real cost of scripting often goes far beyond development time.

⚠️𝗞𝗲𝘆-𝗽𝗲𝗿𝘀𝗼𝗻 𝗱𝗲𝗽𝗲𝗻𝗱𝗲𝗻𝗰𝘆
Every company has "the engineer" who wrote the script years ago.
What happens when that person changes jobs, retires, or moves to another role?
Suddenly, this workflow becomes difficult to maintain, or even understand.

⚠️𝗩𝗮𝗹𝗶𝗱𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝘁𝗿𝗮𝗻𝘀𝗽𝗮𝗿𝗲𝗻𝗰𝘆
A script may produce a utilization ratio or a pass/fail result.
But can it show exactly:
• which formula was used?
• which clause of the standard it came from?
• how the result can be audited years later?
For clients, certifying bodies, and quality systems, transparency matters just as much as the result itself.

⚠️𝗦𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗮𝗹𝘄𝗮𝘆𝘀 𝗰𝗵𝗮𝗻𝗴𝗲
Eurocode revisions, DNV-RP-C203 fatigue updates, new EN 13001 amendments.
With custom scripts, someone must interpret every change, update the logic, validate the implementation, and test it again.

⚠️𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝘁𝗶𝗺𝗲 𝗶𝘀 𝗲𝘅𝗽𝗲𝗻𝘀𝗶𝘃𝗲
A senior structural engineer debugging scripts is often the most expensive programmer in the company.

⚠️𝗥𝗲𝗽𝗼𝗿𝘁𝗶𝗻𝗴 𝗶𝘀 𝗵𝗮𝗿𝗱𝗲𝗿 𝘁𝗵𝗮𝗻 𝗰𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀
Calculations are often the easy part. Generating consistent, auditable reports is where many scripting projects become difficult to scale.

💡 This is where code-checking software changes the equation.

𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 𝗽𝗿𝗼𝘃𝗶𝗱𝗲𝘀 𝘆𝗼𝘂 𝘄𝗶𝘁𝗵:
✔️ Library of 60+ industry standards
✔️ Correct results and formulas from code clauses
✔️ Automated reporting with calculations, references, tables, and plots
✔️ Regular updates when standards evolve
✔️ A documented and supported solution that doesn't depend on a single engineer

Are your code-checking scripts still saving time or creating hidden costs?

👉𝗖𝗼𝗻𝘁𝗮𝗰𝘁 𝘂𝘀 𝘁𝗼 𝘀𝗲𝗲 𝗵𝗼𝘄 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 𝗰𝗮𝗻 𝗵𝗲𝗹𝗽: https://shorturl.at/vHve3

⏰ 𝗥𝗲𝗺𝗶𝗻𝗱𝗲𝗿: "𝗟𝗶𝗳𝗲𝘁𝗶𝗺𝗲 𝗘𝘅𝘁𝗲𝗻𝘀𝗶𝗼𝗻 𝗳𝗼𝗿 𝗛𝗲𝗮𝘃𝘆 𝗟𝗶𝗳𝘁𝗶𝗻𝗴 𝗮𝗻𝗱 𝗣𝗼𝗿𝘁 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁" 𝘄𝗲𝗯𝗶𝗻𝗮𝗿 𝗶𝘀 𝘁𝗼𝗺𝗼𝗿𝗿𝗼𝘄!

Aging cranes, fragmented inspection records, and increasing pressure to extend equipment lifetime... How can you manage it without compromising safety and compliance?

Join 𝗥𝗼𝗺𝗮𝗻 𝗦𝗮𝗺𝗰𝗵𝘂𝗸, 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿’𝘀 𝗛𝗲𝗮𝗱 𝗼𝗳 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴, to explore practical approaches to smarter asset management and lifetime extension with SDC SAM.

📅 𝗝𝘂𝗻𝗲 𝟰, 𝟮𝟬𝟮𝟲 | 𝟭𝟲:𝟬𝟬 𝗖𝗘𝗧

Secure your spot before registration closes: https://shorturl.at/1yzEz

𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 𝗮𝘁 𝗣𝗼𝘀𝗶𝗱𝗼𝗻𝗶𝗮 𝟮𝟬𝟮𝟲 𝗶𝗻 𝗔𝘁𝗵𝗲𝗻𝘀

We're already on site, meeting people from the maritime engineering community. We'll be here by 𝗝𝘂𝗻𝗲 𝟱𝘁𝗵!

👤 Our 𝗖𝗢𝗢 𝗢𝗹𝗲𝗴 𝗜𝘀𝗵𝗰𝗵𝘂𝗸 is representing SDC Verifier together with our long-term partners 𝗙𝗘𝗔𝗖 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴.

📍 You can find us at 𝗦𝘁𝗮𝗻𝗱 𝟯.𝟭𝟯𝟭/𝟭𝟵 in 𝗛𝗮𝗹𝗹 𝟯.

🤝 If you are at the event, feel free to stop by and talk to us or book a meeting with Oleg here: https://meetings.hubspot.com/oleg-ishchuk/posidonia

𝗦𝗽𝗿𝗶𝗻𝗴 𝟮𝟬𝟮𝟲 𝗶𝗻 𝗠𝗼𝘁𝗶𝗼𝗻: 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 𝗔𝗰𝗿𝗼𝘀𝘀 𝗚𝗹𝗼𝗯𝗮𝗹 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗘𝘃𝗲𝗻𝘁𝘀

April and May turned into an intense stretch for the SDC Verifier team, and we’re genuinely glad we could take part in so many events across offshore, wind, simulation, and digital engineering communities.

𝗛𝗲𝗿𝗲’𝘀 𝘄𝗵𝗲𝗿𝗲 𝘄𝗲 𝘄𝗲𝗿𝗲 𝗽𝗿𝗲𝘀𝗲𝗻𝘁 👇
• International Offshore Crane and Lifting Conference
• WindEurope Annual Event 2026
• PLM Components Innovation Conference 2026
• Offshore Technology Conference 2026 (OTC)
• Tae Sung Tech Summit 2026 (TSTS)
• Seanergy 2026
• TOC Europe 2026
• SymCon 2026

A dense couple of months, a lot of travel, and even more valuable technical discussions.

Looking forward to continuing these conversations throughout the year.

𝗘𝗱𝗴𝗲 𝗦𝘁𝗿𝗲𝘀𝘀 𝗠𝗲𝘁𝗵𝗼𝗱 𝗼𝗿 𝗘𝗹𝗲𝗺𝗲𝗻𝘁 𝗔𝘃𝗲𝗿𝗮𝗴𝗲? 𝗪𝗵𝗶𝗰𝗵 𝗼𝗻𝗲 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗴𝗶𝘃𝗲𝘀 𝗺𝗼𝗿𝗲 𝗮𝗰𝗰𝘂𝗿𝗮𝘁𝗲 𝗽𝗹𝗮𝘁𝗲 𝗯𝘂𝗰𝗸𝗹𝗶𝗻𝗴 𝗿𝗲𝘀𝘂𝗹𝘁𝘀? 👇

Our engineers made a benchmark, which compares two stress evaluation approaches in 𝗕𝗩 𝗡𝗥𝟲𝟭𝟱 (𝟮𝟬𝟮𝟯) 𝗽𝗹𝗮𝘁𝗲 𝗯𝘂𝗰𝗸𝗹𝗶𝗻𝗴 𝗮𝗻𝗮𝗹𝘆𝘀𝗶𝘀 and shows how identical stress fields can still lead to different utilization factors when edge stress distribution is considered.

𝘚𝘤𝘳𝘰𝘭𝘭 𝘵𝘩𝘦 𝘤𝘢𝘳𝘰𝘶𝘴𝘦𝘭 𝘵𝘰 𝘴𝘦𝘦 𝘵𝘩𝘦 𝘥𝘦𝘵𝘢𝘪𝘭𝘴 👉

🔗 Want the full breakdown and validation details? 𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗯𝗲𝗻𝗰𝗵𝗺𝗮𝗿𝗸 𝗼𝗻 𝗼𝘂𝗿 𝘄𝗲𝗯𝘀𝗶𝘁𝗲: https://shorturl.at/RFAHB

⚠️ 𝗔𝗽𝗽𝗿𝗼𝘅𝗶𝗺𝗮𝘁𝗲𝗹𝘆 𝟴𝟬% 𝗼𝗳 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗮𝗻𝗱 𝗺𝗲𝘁𝗮𝗹 𝗰𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁 𝗳𝗮𝗶𝗹𝘂𝗿𝗲𝘀 𝗶𝗻 𝗰𝗿𝗮𝗻𝗲𝘀 𝗮𝗿𝗲 𝗮𝘁𝘁𝗿𝗶𝗯𝘂𝘁𝗲𝗱 𝘁𝗼 𝗳𝗮𝘁𝗶𝗴𝘂𝗲.

And the dangerous part? Fatigue failure often develops silently.

Unlike overload, fatigue damage accumulates gradually under repeated load cycles:
• lifting and lowering operations
• vibration and dynamic effects
• acceleration and braking

Even when stresses remain below the material yield strength, microscopic cracks can still initiate and grow over time.

For 𝗵𝗲𝗮𝘃𝘆 𝗹𝗶𝗳𝘁𝗶𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲𝘀, this creates a major safety risk because fatigue cracks typically appear in:
• welded joints
• connections
• cutouts
• stress concentration zones

If undetected, these cracks can eventually lead to sudden structural failure. That is why fatigue analysis is essential for cranes and other cyclically loaded steel structures. You also need to continuously prevent and monitor your structures through 𝗿𝗼𝘂𝘁𝗶𝗻𝗲 𝗶𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻𝘀 and 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗵𝗲𝗮𝗹𝘁𝗵 𝗺𝗼𝗻𝗶𝘁𝗼𝗿𝗶𝗻𝗴 𝘀𝘆𝘀𝘁𝗲𝗺𝘀.

One of these is 𝗦𝗗𝗖 𝗦𝗔𝗠, which centralizes all asset data (inspections, FEA results, and monitoring history) into one live dashboard, helping you quickly identify critical areas, prioritize inspections, and decide what requires immediate actions.

🔍𝗟𝗲𝗮𝗿𝗻 𝗺𝗼𝗿𝗲 𝗮𝗯𝗼𝘂𝘁 𝗦𝗗𝗖 𝗦𝗔𝗠 𝗵𝗲𝗿𝗲 𝗳𝗼𝗿 𝗽𝗿𝗼𝗽𝗲𝗿 𝗵𝗲𝗮𝗹𝘁𝗵 𝗮𝘀𝘀𝗲𝘁 𝗺𝗮𝗻𝗮𝗴𝗲𝗺𝗲𝗻𝘁: https://shorturl.at/5b4qm

𝗔𝗴𝗶𝗻𝗴 𝗰𝗿𝗮𝗻𝗲𝘀. 𝗙𝗿𝗮𝗴𝗺𝗲𝗻𝘁𝗲𝗱 𝗶𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗰𝗼𝗿𝗱𝘀. 𝗜𝗻𝗰𝗿𝗲𝗮𝘀𝗶𝗻𝗴 𝗽𝗿𝗲𝘀𝘀𝘂𝗿𝗲 𝘁𝗼 𝗲𝘅𝘁𝗲𝗻𝗱 𝗲𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝗹𝗶𝗳𝗲𝘁𝗶𝗺𝗲 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗰𝗼𝗺𝗽𝗿𝗼𝗺𝗶𝘀𝗶𝗻𝗴 𝘀𝗮𝗳𝗲𝘁𝘆 𝗼𝗿 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲.

Occasional structural analyses and reactive inspections are no longer enough for heavy lifting and port operations.

The real challenge is creating a repeatable workflow where FEA results, inspections, and maintenance actions are connected, helping teams make proactive decisions before failures or costly downtime occur.

That’s exactly what we will discuss during our upcoming webinar:
📅 𝗝𝘂𝗻𝗲 𝟰, 𝟮𝟬𝟮𝟲 | 𝟭𝟲:𝟬𝟬 𝗖𝗘𝗧

🎙 𝗛𝗼𝘀𝘁𝗲𝗱 𝗯𝘆 Roman Samchuk, 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿’𝘀 𝗛𝗲𝗮𝗱 𝗼𝗳 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴

Join us to explore practical approaches to lifetime extension and smart asset management for heavy lifting equipment using 𝗦𝗗𝗖 𝗦𝗔𝗠.

See the full agenda and webinar details on the event page.
𝗗𝗼𝗻’𝘁 𝗺𝗶𝘀𝘀 𝘁𝗵𝗲 𝗰𝗵𝗮𝗻𝗰𝗲 𝘁𝗼 𝘀𝗲𝗰𝘂𝗿𝗲 𝘆𝗼𝘂𝗿 𝘀𝗽𝗼𝘁: https://shorturl.at/1yzEz

𝗪𝗲’𝗿𝗲 𝗮𝘁 𝗧𝗢𝗖 𝗘𝘂𝗿𝗼𝗽𝗲 𝟮𝟬𝟮𝟲 𝗶𝗻 𝗛𝗮𝗺𝗯𝘂𝗿𝗴 𝗼𝗻 𝗠𝗮𝘆 𝟭𝟵–𝟮𝟭 🚢

Excited to meet port and terminal professionals, discuss structural verification challenges, compliance-ready reporting, and smarter engineering workflows for port equipment and infrastructure.

Meet SDC Verifier’s team at the 𝗯𝗼𝗼𝘁𝗵 𝗔𝟰𝟴: 𝗥𝗼𝗺𝗮𝗻 𝗦𝗮𝗺𝗰𝗵𝘂𝗸, Head of Engineering, together with Structural Engineers 𝗠𝗶𝗰𝗵𝗮𝗹 𝗢𝗹𝗲𝗸𝘀𝘆 and 𝗪𝗼𝗷𝗰𝗶𝗲𝗰𝗵 𝗔𝗯𝗿𝗮𝗵𝗮𝗺𝗶𝗸.

If you’re attending TOC Europe and would like to connect, feel free to visit our booth or reach out to Roman Samchuk on LinkedIn to arrange a meeting. See you in Hamburg!