Slick Technologies

Photography or Gaming?
Which of this two mobile phones does it better?

Is It Really Different? Infinix Smart 5 vs Infinix Smart 6 Infinix Smart 5 vs Infinix Smart 6 difference. In this video, I compared the Infinix Smart 5 and the Infinix Smart 6. The areas and questions I covered in th...

To whom it may concern,

I have discovered that most individuals are afraid to click on website links sent to them on social media such as Facebook, WhatsApp, Instagram, etc.

I'm very much aware that you are trying to avoid any spam or phishing link sent to hack your social media.

However, it is important I educate you on this misconception.

Your social media account cannot be hacked by your mere clicking on a website link sent to you.

It can only be hacked after you click on a website link, and the link takes you to a website that ask you to put in your Facebook username and password.

If you are sent to any website that is asking you to enter your Facebook username and password, DO NOT DO IT! CLOSE THAT WEBSITE IMMEDIATELY!

Go back to your Facebook account and delete that message. Also, report that message as spam to Facebook.

Thanks.

HOW TO BALANCE THE 4 ELEMENTS OF ACADEMIC WRITING

Now there is no single technique by which this can be achieved. Rather, there seem to be four elements whose relationships with one another need to be balanced:
1. the writer,
2. the object of the analysis or discussion (the content),
3. the reader, and
4. the formal properties of the language itself.

Not everybody will balance these elements in quite the same way; and this is as it should be, since there is no such thing as a uniform, ideal academic English. Getting the balance right will depend partly on how you, the writer, respond in particular circumstances and partly on those traditions of expression and scholarship which grow up within certain disciplines, schools of thought within disciplines, and within particular college and university departments.

These four elements of the writing situation – writer, subject matter, reader and the forms of language – are reflected in four main characteristics of a piece of written language itself. They must all be handled together in the act of writing. Their competing claims to attention are resolved in the choice of one word in preference to
another, in the structuring of a sentence, in the placing of an emphasisin the paragraph, in the confidence with which you argue your case,and so on.

The four characteristics are these:
A.
Your own point of view must emerge, not as a mere opinion but as a justified judgement.

B.
You need to treat your subject matter as comprehensively and as precisely as the essay topic demands. From the range of information and ideas found in your reading you need to create a unified view. You must read carefully and do your best to make your language clarify the information and ideas you find in your books.

C
You must present your work in the appropriate fashion for academic readers. This means that you will have to learn certain conventions of academic writing which are, at times, quite different from those you may be used to, or those youwill find in non-academic contexts.

D.
Finally, the text of your essay needs to forge a coherent unity from the many diverse elements of language and thought that go to make it. It is in many of the details of your text that your purpose is realised. An essay is not merely a vehicle for ideas, but is itself (whatever the discipline) a piece of literature.

HOW TO STRUCTURE AND PLAN WRITING YOUR PROJECT

• Develop a and a plan for writing your .

• Agree a schedule for written outputs and feedback cycles with your supervisor.

• Use generative to get your points down on paper/screen, then improve structure and style when you revise.

• Try out new writing strategies, adapt them, continue with the ones that work – use them regularly.

• Design your thesis – write down what’s going in each chapter.

• Manage the intensive writing phase at the end.

PROJECT REPORTS FOR ESTATE MANAGEMENT STUDENTS


P.S. PICK AT MOST THREE (3) PROJECT TITLES. TAKE THEM TO YOUR PROJECT SUPERVISOR/COORDINATOR FOR THE APPROVAL OF ONE (1) OF THE PROJECT TITLE. SEND US A MESSAGE TO GET A COPY OF THE REPORT FOR YOUR APPROVED PROJECT TITLE.

1. A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN
RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA

2. A CRITICAL ANALYSIS OF THE EFFECTS OF ECONOMIC VARIATIONS ON REAL PROPERTY MANAGEMENT - A CASE STUDY OF ONITSHA PROPERTY MARKET

3. A CRITICAL EXAMINATION OF THE APPROPRIATE APPLICATION OF CONTEMPORARY VALUATION TECHNIQUES IN THE DETERMINATION OF MARKET VALUES OF RESIDENTIAL PROPERTY INVESTMENTS IN UYO, NIGERIA

4. A CRITICAL EXAMINATION OF THE VALUATION OF LEASEHOLD MINERAL RIGHTS BY THE INCOME CAPITALIZATION METHOD

5. ASSESSMENT OF FACILITY MANAGEMENT SERVICE PROCUREMENT STRATEGIES IN THE FOOD AND BEVERAGE MANUFACTURING INDUSTRY IN LAGOS STATE, NIGERIA

6. ASSESSMENT OF THE APPLICATION OF INFORMATION AND COMMUNICATION TECHNOLOGY IN REAL ESTATE PRACTICE (A CASE STUDY OF LAGOS METROPOLIS)

7. ASSESSMENT OF THE IMPACT OF DEMAND PRESSURE ON RESIDENTIAL RENT IN ENUGU METROPOLIS FROM ‘1999-2008’ IN NIGERIA

8. ASSESSMENT OF THE IMPACT OF INSTITUTIONAL CONTROL IN THE MANAGEMENT OF PUBLIC ESTATES (A CASE STUDY OF CENTRAL BANK OF NIGERIA QUARTERS, ENUGU)

9. A STUDY OF WETLAND VALUATION PRACTICE FOR COMPENSATION IN THE NIGER DELTA, NIGERIA

10. CRITICAL ANALYSIS OF THE IMPACT OF THE LAND USE ACT OF 1978 ON PROPERTY DEVELOPMENT IN NIGERIA: A CASE STUDY OF ENUGU URBAN

11. DEVELOPMENT OF A MODEL FOR MEASUREMENT OF URBAN INCREMENTAL HOUSING AFFORDABILITY IN KADUNA STATE, NIGERIA

12. FACILITY MANAGEMENT PRACTICE IN CONTRADISTINCTION WITH PROPERTY MANAGEMENT WITHIN ESTATE SURVEYING AND VALUATION IN SOUTHEASTERN STATES OF NIGERIA

13. HEURISTICS IN PROPERTY INVESTMENT VALUATION IN NIGERIA

14. MANAGEMENT OF MULTI-TENANTED LOW-INCOME RESIDENTIAL PROPERTIES IN NIGERIA, A CASE STUDY OF ENUGU METROPOLIS, NIGERIA

15. PROBLEMS OF FACILITIES MANAGEMENT IN CORPORATE ORGANIZATIONS IN LAGOS STATE (A CASE STUDY OF SOME SELECTED MANUFACTURING INDUSTRIES)

16. RELIABILITY AND CONSISTENCY OF THE INVESTMENT METHOD OF VALUATION - A STUDY OF LAGOS METROPOLIS

17. RISK MANAGEMENT IN COMMERCIAL SHOPPING MALLS IN ABUJA, A STUDY OF INVESTMENT IMPLICATIONS

18. THE ROLE OF THE ESTATE SURVEYOR AND VALUER IN FACILITY MANAGEMENT IN ENUGU URBAN

19. THE EFFECTS OF SLUM ON RENTAL PROPERTY VALUES

PROJECT REPORTS FOR AGRICULTURAL ENGINEERING STUDENTS


P.S. PICK AT MOST THREE (3) PROJECT TITLES. TAKE THEM TO YOUR PROJECT SUPERVISOR/COORDINATOR FOR THE APPROVAL OF ONE (1) OF THE PROJECT TITLE. SEND US A MESSAGE TO GET A COPY OF THE REPORT FOR YOUR APPROVED PROJECT TITLE.

1. A FEASIBILITY STUDY FOR THE ESTABLISHMENT OF AN INDUSTRIAL SHEA NUT PROCESSING FACILITY

2. A TIME-BASED STRESS-DAY INDEX CONCEPT FOR IRRIGATION SCHEDULING

3. AN ECONOMIC STUDY OF THE EFFECTS OF CLIMATE CHANGE ON FOOD SECURITY IN TARABA STATE, NIGERIA

4. CHARACTERISATION OF SOIL PHYSICAL PROPERTIES FOR POND DESIGN FOR AQUACULTURE AMONG RICE FARMERS AT KWABRE DISTRICT

5. COMPARATIVE STUDY OF EFFLUENT FROM ANAEROBIC DIGESTERS FOR HUMAN AND FRUIT WASTE

6. DESIGN, CONSTRUCTION AND EVALUATION OF A TRACTOR-MOUNTED GROUNDNUT HARVESTER

7. DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A MAGNETIC SIEVE GRINDING MACHINE

8. DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A
POSTHARVEST HEAT STORAGE SOLAR ENERGY CROP DRYER

9. DESIGN, CONSTRUCTION AND SIMULATION OF MAIZE COBS FLUIDIZED BED COMBUSTOR

10. DESIGN, DEVELOPMENT AND EVALUATION OF A CONTINUOUS-FLOW MIXING GRAIN DRYER

11. DESIGN, DEVELOPMENT AND PERFORMANCE EVALUATION OF AN ACTIVE SOLAR DRYER FOR BIOMATERIAL PROCESSING

12. DESIGN, FABRICATION, TESTING AND EVALUATION OF TWO AEROPONIC SYSTEMS AS ALTERNATIVE PRODUCTION METHODS FOR SEED YAMS

13. DETERMINATION OF OPTIMUM STOCK LEVEL OF FARM TRACTOR SPRRB PARTS FOR EFFECTIVE MAINTENANCE MANAGEMENT IN NIGERIA

14. DEVELOPMENT AND EVALUATION OF A SINGLE-PASS VEGETABLE (PRIVATE) MILL

15. DEVELOPMENT AND EVALUATION OF AN ABRASIVE WEAR TEST EQUIPMENT

16. DEVELOPMENT AND EVALUATION OF AN INTEGRAL PASSIVE SOLAR CROP DRYER

17. DEVELOPMENT AND PERFORMANCE EVALUATION OF A DOUBLE-ROTOR SELF-ACTION CASSAVA GRATER

18. DEVELOPMENT AND PERFORMANCE EVALUATION OF A NON-WEIGHING LYSIMETER FOR AFRICAN SPINACH

19. DEVELOPMENT AND PERFORMANCE EVALUATION OF A PEDESTRIAN CONTROLLED RICE STRIPPER

20. DEVELOPMENT AND PERFORMANCE EVALUATION OF HYDRAULIC PISTON PRESS BIOMASS HOLLOW BRIQUETTE MAKING MACHINE

21. DEVELOPMENT OF A MODEL FOR THIN LAYER SOLAR DRYING OF SALTED FISH FILLETS

22. DEVELOPMENT OF AN IMPROVED IAR SORGHUM THRESHER

23. DEVELOPMENT OF FIBRE REINFORCED PLASTIC SOLAR COOKER

24. EFFECT OF SOIL AND WATER CONSERVATION MEASURES ON COWPEA AND MAIZE PERFORMANCE IN THE NORTHERN AND UPPER EAST REGIONS

25. EFFECTS OF PARTICLE SIZE AND TIME OF SLURRY STORAGE ON ODOUROUS COMPOUNDS PRODUCTION FROM COW DUNG

26. EVALUATION OF SELECTED CROP-YIELD WATER USE MODELS FOR TOMATO (LYCOPERSICON ESCULENTUM) UNDER MOISTURE STRESS CONDITIONS

27. EVALUATION OF SOME PLANT PRODUCTS FOR THE CONTROL OF THE BRUCHID Callosobruchus subinnotatus PIC. ON BAMBARA GROUNDNUT (Vigna subterranea (L.) Verdcourt

28. EVALUATION OF WATER ADVANCE MODELS FOR FURROW IRRIGATION SYSTEM

29. IMPACTS OF RURAL WATER SUPPLY SYSTEMS IN FARMING COMMUNITIES

30. INVESTIGATION INTO YIELD REDUCTION OF SUGARCANE PLANTATION OF THE SAVANNAH SUGAR COMPANY, NUMAN NIGERIA

31. MODELLING OF ENERGY REQUIREMENT DEMAND FOR TILLAGE OPERATIONS IN MAIZE PRODUCTION

32. MODIFICATION AND EVALUATION OF A GROUNDNUT CRACKER FOR CRACKING JATROPHA CURCAS SEEDS

33. MODIFICATION AND PERFORMANCE EVALUATION OF AN IMPROVED SOYABEAN THRESHER

34. OPTIMIZATION OF THERMAL COMFORT IN A NATURALLY VENTILATED LIVESTOCK BUILDING

35. PERFORMANCE EVALUATION OF SOLAR POWERED BOREHOLES AND USE OF CAPPED BOREHOLES FOR IRRIGATION

36. PERFORMANCE EVALUATION OF IRRIGATION WATER DISTRIBUTION SYSTEMS OF THE KANO RIVER PROJECT

37. POTENTIAL OF RAINWATER HARVESTING AND USES IN THE COASTAL SAVANNAH ZONE

38. RAINFALL DATA GENERATION FOR SAMARA, ZARIA USING STATISTICAL PARAMETERS

39. RESPONSE OF OKRA TO DIFFERENT IRRIGATION AND FERTILIZATION METHODS

40. STANDARDISATION OF THE GRATING SURFACE OF CASSAVA GRATERS FOR GARRI

41. VARIETAL RESPONSE OF IRISH POTATOES TO IRRIGATION
SCHEDULING IN THE NORTHERN GUINEA-SAVANNAH ZONE OF NIGERIA

42. WATER DIFFUSION COEFFICIENTS OF SELECTED CEREALS AND LEGUMES AS AFFECTED BY TEMPERATURE AND VARIETY

43. DESIGN AND CONSTRUCTION OF A SENSOR DEVICE FOR DETERMINING SOIL MOISTURE CONTENT

PROJECT REPORTS FOR MECHANICAL ENGINEERING STUDENTS


P.S. PICK AT MOST THREE (3) PROJECT TITLES. TAKE THEM TO YOUR PROJECT SUPERVISOR/COORDINATOR FOR THE APPROVAL OF ONE (1) OF THE PROJECT TITLE. SEND US A MESSAGE TO GET A COPY OF THE REPORT FOR YOUR APPROVED PROJECT TITLE

1. A DECISION MODEL FOR THE DESIGN AND OPERATION OF INVENTORY PROGRAMMES IN A MANUFACTURING INDUSTRY

2. AN ASSESSMENT OF THE PERFORMANCE AND MAINTENANCE CULTURE OF THE AHMADU BELLO UNIVERSITY, SAMARU, ZARIA WATER TREATMENT PLANT

3. AN EVALUATION OF THE POTENTIALS OF NATURAL GAS IN THE ECONOMIC DEVELOPMENT OF NIGERIA

4. ANALYSIS OF AN AUTOMATIC CONTROL SYSTEM FOR ONLINE BLENDING OF PETROL WITH CORROSION INHIBITOR IN THE DIRECT CONTINUOUS ELECTRONIC FUEL INJECTION AUTOMOBILE ENGINE

5. APPLICATION OF JUST-IN-TIME TECHNIQUE OF TOTAL QUALITY MANAGEMENT IN OIL FLOW STATIONS

6. ASSESSMENT OF OIL SPILLAGE AND ITS CONTROL IN THE OIL AND GAS INDUSTRY IN NIGERIA

7. ASSESSMENT OF THE IMPACT OF POWER OUTAGES ON COMMERCIAL CONSUMERS (A CASE STUDY OF COLDROOMS CONSUMERS AT TRANS-AMADI AREA, PORT- HARCORT)

8. CHARACTERISATION OF SOME NIGERIAN COALS FOR POWER GENERATION

9. COMPARATIVE ANALYSIS OF RENEWABLE ENERGY SOURCES FOR POWER GENERATION IN NIGERIA

10. COMPARATIVE ANALYSIS OF THE AMINOLYSIS OF POLYETHYLENE TEREPHTHALATE WASTE AND SODIUM DICHROMATE AS CORROSION INHIBITORS FOR MILD STEEL IN 0.5M HCL AND 0.5M H2SO4

11. COMPARATIVE STUDY OF DIFFERENT HONEYCOMB GEOMETRIES FOR THE SUPPRESSION OF CONVECTIVE HEAT TRANSFER IN FLAT PLATE SOLAR COLLECTORS

12. COMPUTATIONAL FLUID DYNAMICS (CFD) MODELING OF TURBULENCE INDUCED DRAG IN VEHICLE AERODYNAMICS

13. CORROSION AND FATIGUE BEHAVIOUR OF WELDED AUSTENITIC STAINLESS STEEL IN DIFFERENT ENVIRONMENTS

14. DESIGN AND CONSTRUCTION OF A STARTER MECHANISE
FOR APPLICATION IN A TWO-STROKE ENGINE

15. DESIGN AND PRODUCTION TECHNIQUES FOR AN INTERNAL COMBUSTION ENGINE PISTON: THE NIGERIAN EXPERIENCE

16. PERFORMANCE ANALYSIS OF A COMPRESSION–IGNITION ENGINE OPERATED ON BIODIESEL FUEL PRODUCED FROM WASTE COOKING OIL METHYL ESTERS

17. DESIGN, CONSTRUCTION AND EXPERIMENTAL EVALUATION OF THE PRODUCTS OF A LOW COST BRIQUETTE MACHINE FOR RURAL COMMUNITIES IN NIGERIA

18. DESIGN, CONSTRUCTION AND SIMULATION OF MAIZE COBS FLUIDIZED BED COMBUSTOR

19. DESIGN, CONSTRUCTION AND TEST OF A PASSIVE SOLAR TRACKING DEVICE

20. DESIGN, CONSTRUCTION AND TESTING OF A FLUIDISED BED COMBUSTION BOILER FOR ENERGY PRODUCTION

21. DESIGN, CONSTRUCTION AND TESTING OF A ZEOLITE-WATER SOLAR ADSORPTION REFRIGERATOR

22. DESIGN, CONSTRUCTION AND TESTING OF AN OUTWARD RADIAL-FLOW REACTION WATER TURBINE

23. DESIGN, SIMULATION ,CONSTRUCTION AND TESTING OF A THERMOSYPHON SOLAR WATER HEATER FOR A BLOCK IN POSTGRADUATE HOSTEL IN AHMADU BELLO UNIVERSITY, ZARIA

24. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR OVEN

25. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A THERMOSYPHON SOLAR WATER HEATER

26. DESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG

27. DEVELOPMENT OF A POSITIVE-DISPLACEMENT PUMP

28. DEVELOPMENT OF AUTOMOBILE DISK BRAKE PADS USING ECO-FRIENDLY PERIWINKLE SHELL AND FAN PALM SHELL MATERIALS

29. DEVELOPMENT OF CONCEPTUAL MODELS FOR PLANTS AND EQUIPMENT PROCUREMENT IN TERTIARY INSTITUTIONS IN KADUNA STATE

30. DEVELOPMENT OF ENVIRONMENTALLY FRIENDLY BIODEGRADABLE CUTTING FLUID FROM SOYA BEANS (GLYCINE MAX)

31. ECONOMIC VIABILITY OF A SMALL HYDROPOWER PLANT AT ONUAKU RIVER, ABIA STATE NIGERIA

32. EFFECT OF FAULTY DESIGN AND CONSTRUCTION ON BUILDING MAINTENANCE (CASE STUDY OF AFDIN AND MOTHER CAT CONSTRUCTION COMPANIES IN KADUNA STATE)

33. EFFECTS OF AFRICAN BASIL(OCIMUMGRATISSIMUM) AND BUSH MINT(HYPTISSUAVEOLENS) LEAVES EXTRACTS IN INHIBITING CORROSION OF MEDIUM CARBON STEEL IN 0.5M OF HCL, H2SO4 AND NACL MEDIA

34. EFFECTS OF SOME BITUMEN COATING TREATMENTS ON THE CORROSION AND MECHANICAL BEHAVIOUR OF LOW CARBON STEEL

35. ENERGY BENCHMARKING AND CARBON FOOTPRINT REDUCTION OPPORTUNITIES IN PORTLAND CEMENT MANUFACTURING PROCESSES IN NIGERIA

36. EVALUATION OF A SMALL HYDRO/PHOTOVOLTAIC HYBRID SYSTEM POTENTIAL FOR ELECTRICITY GENERATION FOR FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI

37. EVALUATION OF LEVELISED COST OF ELECTRICITY GENERATED FROM HOT SPRING GEOTHERMAL RESOURCES IN NIGERIA: A CASE STUDY OF RAFIN REEWA HOT SPRING, LERE LOCAL GOVERNMENT OF KADUNA STATE

38. EVALUATION OF MECHANICAL AND CORROSION PROPERTIES OF MILD STEEL IN SOME ENVIRONMENTS INHIBITED BY AFRICAN LOCUST BEANS TREE (PARKIA BIGLOBOSA) EXTRACTS

39. EVALUATION OF RAIL TRANSPORTATION FOR PETROLEUM PRODUCTS DELIVERY IN NIGERIA

40. EVALUATION OF VIABILITY OF A CRUDE OIL RESERVOIR USING PETROPHYSICAL PARAMETERS (A CASE STUDY OF AGBARA OIL WELL RESERVOIR IN THE NIGER-DELTA BASIN)

41. EXPERIMENTAL INVESTIGATION OF UPFLOW BIOREACTORS WITH CENTRAL SUBSTRATE DISPENSER

42. EXPERIMENTAL PERFOMANCE EVALUATION OF CHARCOAL-STOVE

43. FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL STRESSES IN SHIELDED METAL ARC WELDING OF MILD STEEL PLATES

44. FUZZY LOGIC MODELLING OF THE EMISSIONS OF SPARK IGNITION ENGINE RUNNING ON ETHANOL-PETROL BLENDS

45. HEAT AND MASS TRANSFER ANALYSIS OF A GARRI FRYING MACHINE

46. IMPROVING THE FRICTION AND WEAR PROPERTIES OF AN ORGANIC-BASED FRICTION MATERIAL

47. INHIBITION EVALUATION OF CHEMICAL AND PLANT EXTRACTS ON THE CORROSION OF METALLIC ALLOYS IN ACIDIC ENVIRONMENT

48. INVESTIGATION INTO ELECTRICAL ENERGY CONSUMPTION IN ABU SAMARU ZARIA

49. INVESTIGATION OF CORROSION INHIBITION OFGUAVA, BANANA AND ALMOND PLANT EXTRACT IN 0.5M OF HCL AND H2SO4 SOLUTION ON LOW CARBON STEEL

50. INVESTIGATION OF MECHANICAL PROPERTIES OF ZEOLITE-Y AND ZSM-5 CATALYSTS SYNTHESIZED FROM LOCALLY AVAILABLE CLAYS

51. INVESTIGATION OF THE THERMAL PROPERTIES OF WOOD ASH AND CLAY-SAWDUST MIXTURE FOR USE AS INSULATION MATERIALS IN A ROCKET STOVE

52. MANUFACTURING STRATEGIES FOR THE CASSAVA INDUSTRY IN NIGERIA

53. MEASUREMENT AND EVALUATION OF THE PERFORMANCE PROPERTIES OF SELECTED LOCALLY PRODUCED LUBRICANTS (ENGINE OIL)

54. MECHANICAL AND CORROSSION BEHAVIOUR OF LOW CARBON STEEL IN CRUDE OIL INHIBITED BY SOME EXTRACTS OF ACACIA NILOTICA (GUM ARABIC TREE) PLANT

55. MECHANICAL PROPERTIES OF SPIDER’S COBWEBS

56. MODELLING AND OPTIMIZATION OF PID CONTROLLER’S PARAMETERS FOR DEEP SPACE ANTENNA POSITIONING SYSTEM USING GENETIC ALGORITHM

57. MODELLING AND SIMULATION OF BIODIESEL BLENDS PERFORMANCE IN COMPRESSION IGNITION ENGINES

58. OPTIMAL VEHICLE REPLACEMENT STRATEGY IN VEHICLE TRANSPORTATION COMPANIES

59. PERFORMANCE EVALUATION OF DIFFERENT MATERIALS AS CHILLS IN SAND CASTING OF ALUMINIUM ALLOY

60. POTENTIALS OF EXTRACTS OF AFRICAN STAR APPLE AND COCK’S COMB LEAVES AS CORROSION INHIBITORS FORMEDIUM CARBON LOW ALLOY STEEL IN ACIDIC MEDIA

61. PROCESSING AND CHARACTERIZATION OF NATURAL FIBER REINFORCED POLYMER COMPOSITES

62. PRODUCTION AND WELD JOINT PERFORMANCE EVALUATION OF ARC WELDING ELECTRODES FROM DANA ROLLING MILL SCALES

63. PRODUCTION AND PERFORMANCE EVALUATION OF BIODEGRADABLE GREASE (BIOGREASE) FROM BALANITES AEGYPTIACA (DESERT DATE) SEED OIL

64. PRODUCTION, CHARACTERIZATION AND SI ENGINE PERFORMANCE EVALUATION OF PALM BUNCH BIOETHANOL

65. PROSPECTS OF SOLAR ICE MAKING

66. THE APPLICATION OF STATISTICAL QUALITY CONTROL TECHNIQUE IN FOOD AND BEVERAGE INDUSTRY: A CASE STUDY OF HABILA FOOD AND BREVERAGES NIGERIA LTD- KANO

67. THE EFFECTS OF PRESSURE ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF DIE CAST ALUMINUM ALLOYS

68. TIME-SERIES FORECAST OF NIGERIA’S ELECTRICITY STATISTICS FROM 1991-2028 USING AUTO-REGRESSIVE INTEGRATED MOVING AVERAGE (ARIMA) MODEL

PROJECT REPORTS FOR PHARMACEUTICAL TECHNOLOGY STUDENTS


P.S. PICK AT MOST THREE (3) PROJECT TITLES. TAKE THEM TO YOUR PROJECT SUPERVISOR/COORDINATOR FOR THE APPROVAL OF ONE (1) OF THE PROJECT TITLE. SEND US A MESSAGE TO GET A COPY OF THE REPORT FOR YOUR APPROVED PROJECT TITLE

1. STUDIES ON THE ANTIVENOM ACTIVITIES OF THE AQUEOUS EXTRACTS OF PAULLINIA PINNATA AND DETARIUM MICROCARPUM AGAINST ECHIS CARINATUS (CARPET VIPER) VENOM

2. THE FORMULATION AND EVALUATION OF MATRIX-TYPE SUSTAINED RELEASE DICLOFENAC POTASSIUM

3. THE APPLICATION OF SOME ANIMAL FATS AS LIPID BASE IN THE FORMULATION OF MEDICATED CREAMS AND OINTMENTS

4. EVALUATION OF MILLET STARCHES (PENNISETUM GLAUCUM AND PENNISETUM AMERICANUM) AS TABLET BINDERS AND DISINTEGRANTS

5. THE EFFECT OF PRESERVATIVES ON THE AQUEOUS STABILITY OF AN ORAL REHYDRATION SALT SOLUTION

6. IMMUNOMODULATORY AND ANTIOXIDANT CONSTITUENTS OF LORANTHUS MICRANTHUS LINN. (LORANTHACEAE) PARASITIC ON KOLA

7. IN VITRO BIOEQUIVALENCE STUDIES OF DIFFERENT BRANDS OF AZITHROMYCIN AND CLARITHROMYCIN TABLET DOSAGE FORMS MARKETED IN NIGERIA

8. EVALUATION OF TABLETING AND COMPRESSIONAL CHARACTERISTICS OF NATIVE AND MICROCRYSTALLINE STARCHES DERIVED FROM DIGITARIA IBURUA

9. STUDY ON WAXY MATRIX DRUG DELIVERY SYSTEMS CONTAINING CELLULOSE PRODUCED USING TRONA AS AN ARTIFICIAL CHAPERON

PROJECT REPORT FOR POLITICAL SCIENCE STUDENTS


P.S. PICK AT MOST THREE (3) PROJECT TITLES. TAKE THEM TO YOUR PROJECT SUPERVISOR/COORDINATOR FOR THE APPROVAL OF ONE (1) OF THE PROJECT TITLE. SEND US A MESSAGE TO GET A COPY OF THE REPORT FOR YOUR APPROVED PROJECT TITLE

1. POVERTY ALLEVIATION IN NIGERIA (A CASE STUDY OF UNICEF IN KADUNA STATE 1991-2001)

2. YOUTH PARTICIPATION IN ELECTORAL PROCESS. A STUDY ON THE ROLE OF YOUTH IN THE 2015 ELECTION IN BIRNIN KEBBI

3. ELECTORAL VIOLENCE IN NIGERIA: THE CASE OF ANAMBRA STATE GUBERNATORIAL ELECTIONS (2003 AND 2007)

4. THE ROLE OF CREDIBLE ELECTIONS ON THE CONSOLIDATION OF DEMOCRACY: A CASE STUDY OF ANAMBRA STATE FROM 2003 - 2006

5. POLITICAL ECONOMY OF FISH PRODUCTION AS SOURCE OF REVENUE: A CASE STUDY OF YAURI LOCAL GOVERNMENT AREA KEBBI STATE

6. DOMESTIC STRUCTURE AND CONDUCT OF NIGERIA’S FOREIGN POLICY,A CASE STUDY OF GOODLUCK JONATHAN’S REGIME(2010-2015)

7. ECONOMIC AND FINANCIAL CRIMES COMMISSION AND CHALLENGES OF P***C ACCOUNT ABILITY IN THE FEDERAL CAPITAL TERRITORY, 2003-2010

8. NIGERIA'S HUMAN RIGHTS POSTURE FROM 1993-1998

9. ECONOMIC DIPLOMACY AND ECONOMIC DEVELOPMENT IN NIGERIA: AN ANALYSIS OF OBASANJO’S ADMINISTRATION, 1999-2007

10. POLITICS AND CONFLICTS: A STUDY OF EBIRALAND, NIGERIA (1977-2007)

11. THE INFORMAL SECTOR AND EMPLOYMENT GENERATION IN NIGERIA: A FOCUS ON OKADA TRANSPORT BUSINESS IN NSUKKA METROPOLIS

12. ELECTIONS AND DEMOCRATIC CONSOLIDATION IN NIGERIA: A STUDY OF 2007 AND 2011 GENERAL ELECTIONS IN NORTH-WEST GEO-POLITICAL ZONE

13. INTERGOVERNMENTAL FINANCIAL RELATIONS AND LOCAL GOVERNMENT AUTONOMY IN NIGERIA: A CASE STUDY OF IGBO-ETITI LOCAL GOVERNMENT AREA OF ENUGU STATE, 1999-2012

14. DEMOCRACY AND VIOLENCE: AN ASSESSMENT OF THE IMPACTS OF KALARE THUGGERY IN GOMBE STATE, 2003-2013

15. MANPOWER DEVELOPMENT AND THE PERFORMANCE OF CIVIL SERVANTS IN ANAMBRA STATE, NIGERIA, 1996-2006
16. A STUDY OF MANPOWER TRAINING AND PRODUCTIVITY IN ADO-ODO OTA LOCAL GOVERNMENT, OGUN STATE (2006 – 2016)
17. AFRICAN GROWTH AND OPPORTUNITIES ACT AND NIGERIA- UNITED STATES TRADE RELATIONS, 2000- 2011

18. INTERNATIONAL MIGRATION AND THE STUDY OF SOCIO-ECONOMIC DEVELOPMENT IN NIGERIA: THE ROLE OF NIGERIAN IMMIGRATION SERVICE

19. A COMPARATIVE ANALYSIS OF THE PROBLEMS OF POST-MILITARY RULE IN NIGERIA AND GHANA: (1992—2011)

20. ALMAJIRCI (TRADITIONAL ISLAMIC SCHOLARSHIP)AND POLITICAL THUGGERY IN NIGERIA: A CASE STUDY OF BAUCHI STATE, 2007-2015

21. POLITICAL ECONOMY OF CRUDE OIL PRODUCTION AND NIGERIA’S DOWNSTREAM SECTOR

22. FACTORS THAT INFLUENCED VOTERS BEHAVIOUR IN THE 2012 LOCAL GOVERNMENT ELECTION: A CASE STUDY OF SABONGARI LOCAL GOVERNMENT AREA OF KADUNA STATE

23. DEMOCRATISATION AND NATIONAL DEVELOPMENT: A COMPARATIVE ANALYSIS OF NIGERIA AND SOUTH KOREA, 1999 TO 2009

24. POLITICAL PARTIES AND INTERNAL DEMOCRACY IN NIGERIA: AN ASSESSMENT OF CONGRESS FOR PROGRESSIVE CHANGE (CPC) IN KATSINA STATE, 2009-2012

25. AN IMPACT ASSESSMENT OF OPERATION YAKI AS A SECURITY OUTFIT ON CRIME CONTROL IN SABON TASHA, CHIKUN LOCAL GOVERNMENT AREA OF KADUNA STATE 2008-2015

26. POLITICAL REPRESENTATION AND STEWARDSHIP AT LOCAL LEVEL IN NIGERIA’S FOURTH REPUBLIC (AN EXAMINATION OF FUNTUA LOCAL GOVERNMENT CONSTITUENCY 2007-2011)

27. CORRUPTION IN THE NIGERIAN PUBLIC SERVICE: A STUDY OF IMO STATE CIVIL SERVICE (1999-2012)

28. AN ASSESSMENT OF LOCAL GOVERNMENT SERVICE DELIVERY IN NIGERIA: A STUDY OF KADUNA NORTH LOCAL GOVERNMENT AREA OF KADUNA STATE, 1999-2011

29. International Monetary Fund and the Political Economy of Nigeria, 1985-2000

30. CORRUPTION AND PUBLIC ACCOUNTABILITY IN LOCAL GOVERNMENT ADMINISTRATION IN NIGERIA: A CASE STUDY OF SOUTHERN IJAW LOCAL GOVERNMENT OF 1999-2010, BAYELSA STATE

31. BUDGETING AND HUMAN CAPITAL DEVELOPMENT IN NIGERIA: A STUDY OF FEDERAL MINISTRY OF EDUCATION

32. A POLITICAL ECONOMY EXPLANATION OF THE NIGERIAN CIVIL WAR

33. THE POLITICS OF SHARIA IMPLEMENTATION IN NIGERIA: A STUDY
OF KADUNA STATE (1999-2013)

34. A RE-ASSESSMENT OF WOMEN MARGINALIZATION IN GOVERNANCE IN NIGERIA 1999-2011

35. NON-GOVERNMENTAL ORGANISATIONS AND PUBLIC POLICY ON HIVIAIDS IN NIGERIA (1986-2006)

36. REMOTE CONTROL AND THE MANAGEMENT OF PUBLIC ENTERPRISES IN NIGERIA: THE CASE OF THE NIGERIA AIRWAYS

37. AN EVALUATION OF THE DEMOCRATISATION PROCESS IN NIGERIA (1998 – 2006)

38. POLITICS OF ECONOMIC REFORMS IN NIGERIA: A COMPARATIVE ANALYSIS OF THE NEEDS AND SAP

39. EXTERNAL DEBT AND CRISIS OF DEVELOPMENT IN AFRICA: NIGERIAN EXPERIENCE 1999-2007

40. THE ROLE OF UNITED STATES GOVERNMENT IN REGIME CHANGE IN LIBYA AND NEOLIBERAL REFORMS IN POST GADDAFI ERA

41. INFLUENCE OF DREAM FM “POLITICAL VOICES” ON POLITICAL AWARENESS AND PARTICIPATION AMONG THE YOUTH IN SOUTH-EAST, NIGERIA

42. Legislature-Executive Relations in the Presidential System: A Study of Lagos and Ogun States, Nigeria, 1999-2011

43. THE UNITED STATES OF AMERICA AND THE WAR AGAINST INTERNATIONAL TERRORISM: ANALYSIS OF THE INVASION OF IRAQ

44. DOMESTIC POLITICS AND NIGERIAN FOREIGN POLICY. A CASE STUDY OF OBASANJO’S CIVILIAN ADMINISTRATION (1999 – 2003)

45. AFRICAN UNION MISSION AND PEACEKEEPING OPERATIONS IN AFRICA: A CASE STUDY DANFUR CONFLICTS

46. US-IRANIAN RELATIONS (1997-2007): A CRITICAL APPRAISAL

47. THE ROLE OF INTERNATIONAL CIVIL AVIATION ORGANISATION (ICAO) IN THE DEVELOPMENT OF NIGERIAN COLLEGE OF AVIATION TECHNOLOGY ZARIA

48. AN ASSESSMENT OF THE CODE OF CONDUCT BUREAU AND CODE OF CONDUCT TRIBUNAL (CCB and CCT)’S PUBLIC ETHICS PRACTICES (1999 - 2007)

49. SOUTH-SOUTH CO-OPERATION AND NIGERIA-BRAZIL ECONOMIC RELATIONS; 1999-2012

50. PUBLIC SECTOR REFORMS AND PERFORMANCE OF PUBLIC CORPORATIONS: THE CASE OF PHCN (1999 – 2007)

51. An Assessment of the Military Special Task Force and Non-Governmental Organisations Interventions in Peacebuilding Initiatives in Jos North LGA of Plateau State (2010-2015)

52. ANALYSIS OF NIGERIA-CHINA TRADE AND INVESTMENT RELATIONS,
1999-2012

53. CIVIL-MILITARY RELATIONS IN NIGERIA: THE CASE OF PARLIAMENTARY OVERSIGHT OF THE DEFENCE SECTOR-1999 TO 2004
54. A COMPARATIVE PERSPECTIVE OF ECOMOG PEACE OPERATIONS IN LIBERIA AND SIERRA LEONE

55. UNITED STATES OF AMERICA-NIGERIA RELATIONS AND THE POLITICS OF CHARLES TAYLOR’S ASYLUM
56. THE CRISIS OF CITIZENSHIP IN NIGERIA: A STUDY OF INDIGENE-SETTLER CONFLICT IN JOS-NORTH LOCAL GOVERNMENT AREA, PLATEAU STATE

57. AFRICAN GROWTH AND OPPORTUNITY ACT AD POLITICS OF TEXTILE PRODUCTION IN NIGERIA, 2000-2012

PROJECT REPORTS FOR ELECTRICAL ELECTRONICS ENGINEERING STUDENTS



P.S. PICK AT LEAST THREE (3) PROJECT TITLES. TAKE THEM TO YOUR PROJECT SUPERVISOR/COORDINATOR FOR THE APPROVAL OF ONE (1) OF THE PROJECT TITLE. SEND US A MESSAGE TO GET A COPY OF THE REPORT FOR YOUR APPROVED PROJECT TITLE.

1. CONSTRUCTION OF A FIVE WAY INTRUDER DETECTOR SYSTEM USING LASER LIGHT TECHNOLOGY

2. CONSTRUCTION OF CURRENT DETECTOR FOR FAULT TRACING

3. CONSTRUCTION OF ELECTRONIC EGG INCUBATOR WITH DIGITAL DISPLAY

4. CONSTRUCTION OF INFRARED SURVEILLANCE SECURITY CAMERA

5. CONSTRUCTION OF AUTOMATIC VEHICLE IMMOBILIZER FOR VEHICLE THEFT CONTROL & MANAGEMENT

6. CONSTRUCTION OF TEMPERATURE CONTROLLED AC LOAD VOLTAGE REGULATOR

7. CONSTRUCTION OF TEMPERATURE CONTROLLED ELECTRIC HEATER

8. CONSTRUCTION OF AUTOMATIC DARK ACTIVATED LED FLASHER

9. CONSTRUCTION OF AUTOMATIC CHANGE-OVER WITH DOUBLE INPUT INDICATOR

10. CONSTRUCTION OF ELECTRONIC VOICE SCRAMBLER FOR ENCRYPTED AND SECURED VOICE COMMUNICATION

11. CONSTRUCTION OF AUTOMATIC ROAD TRAFFIC SIGN FLASHER FOR ROAD ACCIDENT AND SAFETY MANAGEMENT

12. CONSTRUCTION OF FIRE ALARM DETECTOR SYSTEM WITH BACK-UP POWER

13. CONSTRUCTION OF INFRARED (IR) VOICE TRANSMITTER AND RECEIVER SYSTEM

14. CONSTRUCTION OF REMOTE CONTROLLED FAN REGULATOR SYSTEM

15. CONSTRUCTION OF TOUCH SENSOR AS ALTERNATIVE TO SWITCHING DEVICES

16. CONSTRUCTION OF ULTRASONIC PEST REPELLER FOR PEST CONTROL AND MANAGEMENT

17. CONSTRUCTION OF FIVE DIGIT DISPLAY TOLL GATE MONITOR

18. CONSTRUCTION OF LIGHTNING AND STATIC ELECTRICITY DETECTOR

19. CONSTRUCTION OF MULTI INPUT SURVEILLANCE SECURITY SYSTEM

20. CONSTRUCTION OF A FIVE WAY INTRUDER DETECTOR SYSTEM USING INFRARED TECHNOLOGY

21. CONSTRUCTION OF A TRANSFORMER-LESS AUTOMATIC EMERGENCY LIGHT

22. CONSTRUCTION OF A SOLAR POWERED TRAFFIC CONTROLLER SYSTEM

23. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC CHANGEOVER SWITCH WITH DOUBLE INPUT ALARM

24. DESIGN AND CONSTRUCTION OF A CMOS GATE IC TESTER

25. DESIGN AND CONSTRUCTION OF AN AUTOMATIC WATER PUMP CONTROLLER

26. DESIGN AND CONSTRUCTION OF A DIGITAL MOTOR SPEED CONTROL SYSTEM

27. DESIGN AND CONSTRUCTION OF MICROCONTROLLER BASED MOVING MESSAGE DISPLAY

28. DESIGN AND CONSTRUCTION OF AN IMPROVED MICROCONTROLLER BASED VEHICLE ENGINE TEMPERATURE MONITORING AND MEASUREMENT SYSTEM

29. DESIGN AND CONSTRUCTION OF A HOME AUTOMATION SYSTEM USING MOBILE PHONE

30. DESIGN AND CONSTRUCTION OF AN AUTOMATIC 12V LEAD ACID BATTERY CHARGER

31. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED METAL DETECTOR WITH ALARM AND LIGHT EMISSION

32. DESIGN AND CONSTRUCTION OF A 2KVA INVERTER WITH BATTERY CHARGER

33. DESIGN AND CONSTRUCTION OF A 5KVA PWM SINE WAVE INVERTER

34. DESIGN AND CONSTRUCTION OF A LIGHT CONTROLLED POWER SUPPLY WITH AUTOMATIC BACK-UP CAPABILITY

35. DESIGN AND CONSTRUCTION OF A DIGITAL ELECTRONIC SAFE WITH PROGRAMMABLE PASSWORD

36. DESIGN AND CONSTRUCTION OF A SOUND LEVEL INDICATOR SYSTEM

37. IMPLEMENTATION OF AN AUTOMATIC LIQUID LEVEL CONTROL SYSTEM

38. DESIGN AND CONSTRUCTION OF AN AUTOMATIC STREET LIGHTING CONTROL

39. DESIGN AND CONSTRUCTION OF A 200W AUDIO POWER AMPLIFIER SYSTEM

40. DESIGN AND CONSTRUCTION OF A 100W PUBLIC ADDRESS SYSTEM

41. CONSTRUCTION OF AN AUTOMATIC POPCORN MAKING MACHINE

42. DESIGN AND CONSTRUCTION OF A VARIABLE SPEED BI-DIRECTIONAL DC MOTOR CONTROL SYSTEM

43. DESIGN AND CONSTRUCTION OF AN AUTOMATIC WASHBASIN TAP CONTROLLER

44. CONSTRUCTION OF DIGITAL FUEL PRICE INDICATOR

45. CONSTRUCTION OF A HEARING AID SYSTEM

46. CONSTRUCTION OF AN INFRARED SECURITY SYSTEM

47. CONSTRUCTION OF AN IR REMOTE EXTENDER SYSTEM

48. CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC THREE PHASE CHANGEOVER

49. CONSTRUCTION OF A MICROCONTROLLER BASED ELECTRONIC DOOR LOCK

50. CONSTRUCTION OF PROGRAMMABLE CODE LOCK

51. CONSTRUCTION OF MICROCONTROLLER BASED GAS LEAKAGE DETECTION SYSTEM

52. CONSTRUCTION OF A 1KVA AUTOMATIC VOLTAGE REGULATOR (STABILIZER)

53. CONSTRUCTION OF A SOLAR BATTERY CHARGER SYSTEM

54. WIRING SCHEME FOR A NEWLY CONSTRUCTED RESIDENTIAL BUILDING

55. CONSTRUCTION OF AN AUTOMATIC SOLAR POWER STREET LIGHTING

56. CONSTRUCTION OF 3-PHASE AUTOMATIC CHANGER WITH SURGE PROTECTION AND LINE INDICATOR

57. CONSTRUCTION OF 1500WATTS TRIAC CONTROLLED, TRANSFORMERLESS STEPDOWN 220/110V

58. CONSTRUCTION OF WIRED AND WIRELESS PUBLIC ADDRESS SYSTEM

59. CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC CHANGEOVER SELECTOR

60. DESIGN AND CONSTRUCTION OF A DIGITAL VOLTMETER

61. DESIGN AND CONSTRUCTION OF A THREE-PHASE APPLIANCE PROTECTOR

62. DESIGN AND CONSTRUCTION OF A 12V CAR BATTERY TO 230VAC POWER INVERTER

63. DESIGN AND CONSTRUCTION OF 600VA DC TO AC POWER INVERTER WITH AUTOMATIC LOAD TRANSFER

64. DESIGN AND CONSTRUCTION OF AN ACTIVE INFRARED MOTION DETECTOR FOR HOUSE SECURITY SYSTEM

65. DESIGN AND CONSTRUCTION OF AN AUTOMATIC MAIN FAILURE (AMF) SYSTEM

66. Research on Transformer Overloading and Assessment of Loss-of-Life for Liquid-Filled Transformers

67. DESIGN AND CONSTRUCTION OF A SPEED CONTROL OF DC MOTOR BY USING PWM TECHNIQUE

70. CONSTRUCTION OF A MICROCONTROLLER BASED DIGITAL FUEL DISPENSER WITH VOLUME AND PRICE DISPLAY

71. CONSTRUCTION OF AN EDITABLE DIGITAL CLOCK AND CALENDAR

72. CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATED IRRIGATION SYSTEM

73. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED VOICE-ACTIVATED DEVICE

74. CONSTRUCTION OF A MICROCONTROLLER BASED TEMPERATURE CONTROLLED ELECTRIC HEATER

77. CONSTRUCTION OF REMOTE CONTROLLED FAN REGULATOR SYSTEM WITH ONBOARD SWITCH

78. DESIGN AND CONSTRUCTION OF A 0.5KVA BATTERY FED DC-AC CONVERTER WITH AUTOMATIC VOLTAGE REGULATION

79. DESIGN AND IMPLEMENTATION OF AUTOMATIC PLANT WATERING SYSTEM WITH PUMP

80. CONSTRUCTION OF A MICROCONTROLLER BASED COMMODITY PRICE DISPLAY BOARD

81. DESIGN AND CONSTRUCTION OF AN AUTOMATED DOOR

82. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED DIGITAL VOLTMETER WITH LIQUID CRYSTAL DISPLAY

83. CONSTRUCTION OF MICROCONTROLLER BASED 3-PHASE 200A AUTOMATIC CHANGEOVER WITH TRI-INPUT INDICATOR

84. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED 5KVA AC AUTOMATIC VOLTAGE REGULATOR (STABILIZER)

85. DESIGN AND CONSTRUCTION OF A VEHICLE REVERSE WARNING ALARM

86. DESIGN AND CONSTRUCTION OF A PIPELINE MONITORING AND SURVEILLANCE SYSTEM USING IOT TECHNOLOGY

87. DESIGN AND CONSTRUCTION OF A TRANSFORMERLESS POWER SUPPLY SYSTEM

88. DESIGN AND IMPLEMENTATION OF A LI-FI TECHNOLOGY SYSTEM FOR COMMUNICATION