BAE Racing

OFFICIAL STATEMENT – BAE RACING TEAM

The race has concluded, and we fully respect the decisions made by the Stewards and the Clerk of the Course (COC). However, as this incident has been brought into the public domain, we believe it is important to present the facts from our perspective.

* Car #77 was competing for P3 in class, with P4 close behind. Every second and every position mattered.
* While managing traffic from faster-class cars, Car #77 balanced two responsibilities: minimising time loss in its own class battle while safely facilitating overtaking opportunities.
* Approaching Turn 12, Car #77 had already yielded the racing line. Car #90 completed a clean overtake. Meanwhile, from Turn 11 onwards, Car #268 had committed to the correct racing line in preparation for an overtake while Car #77 continued to facilitate the pass. At that point, Car #91 made contact with the rear of Car #77 instead of completing the pass on the available racing line, forcing Car #77 off the circuit.
* From Turn 11 through Turn 14, Car #268 remained on the correct racing line and completed its overtake safely at Turn 14 without incident. During the same sequence, Car #91 had multiple opportunities to execute a safe overtake using the available racing line. Instead, exiting Turn 14, with Car #268 to the right and Car #91 to the left, Car #77 was left with no remaining racing room and was forced into the wall.
* The responsibility of a faster-class car when overtaking a slower-class car is clearly defined in the MTCC Sporting Regulations and reinforced during every official drivers’ briefing.

This statement is not intended to challenge the officials’ decision. We respect the Stewards, the COC, and the championship. At the same time, we have a responsibility to support our driver, protect our team’s integrity, and present our account when our actions are publicly questioned.

With this, we consider the matter closed and remain committed to competing with professionalism, respect, and sportsmanship.

RV6 R660 ball bearing drop in turbo

Honda civic type r FL5 upgrade

*PWR radiator track spec
*PWR oil cooler
*Spoon thermostat
*HKS intercooler with piping
*PRL intake + titanium inlet pipe
*RV6 downpipe + front pipe
*HPT cooling plate

🏁 Sepang MTCC 2026 – We’re Ready! 🏁

Team BAE Racing is fully prepared and excited for the upcoming MTCC race at Sepang 🔥

Ahead of the race weekend, we would like to express our sincere gratitude to our main sponsor, Empire88 Entertainment, our Official Title Sponsor. Your unwavering support allows us to focus entirely on our preparation and ensure the car is in peak condition for this important event.

This is more than just a race — it’s an opportunity for us to prove ourselves on track 💪
We’re ready to give it everything and push for the best possible result for BAE Racing.

📍 Sepang International Circuit
📆24 – 26 April 2026

Stay tuned and support us! 🔥

🏁 TGR Season 9 – Round 1 Recap

Round 1 of TGR Season 9 has come to an end, and it was a great start for BAE Racing. The team showed strong teamwork, good preparation, and solid ex*****on throughout the race weekend.

We’re proud to share that Car #13, driven by Justin Toh, achieved an impressive P1 finish with an excellent performance on track. Car #32, driven by , also showed strong consistency and determination, finishing the race and contributing to the team’s success.

This result would not have been possible without the support of our valued partners.

Special thanks to:
• E.S Yang Motor Sdn Bhd – for the trust and opportunity
• Sokudo Racing Team – for the great teamwork and support
• All our partners and crew – for their hard work behind the scenes

We would also like to thank our drivers, Justin ( #13) and Chin ( #32), for their effort and performance in securing P1 for Round 1.

This is just the beginning, and we look forward to coming back even stronger in the next round 💪

TOYOTA GAZOO RACING
ROUND 4
SEASON 8
FINAL ROUND

Final Reduction Gear
Ratio 4.50
For Honda Type R FK8 FL5

RM4800 ready stock

More information call or whatsapp 012-2688586

📍BAE RACING
No33, jalan serendah 26/39, seksyen 26, kawasan perindustrian hicom, 40400 shah alam, selangor

⏳Operating hours - 10am-7pm (sunday closed)

🚗 Join Our Team – Mechanics & Racing Crew Wanted!

Passionate about cars and racing? We’re hiring Foreman, Intermediate Mechanics & Trainees, plus Racing Team Support Crew! Competitive pay, benefits & a chance to work in motorsports!

Salary from RM 3,000 - RM 10,000 excluding bonus with EPF and Socso

📍 Shah Alam | 📞 Bee Soon
+6012-229 2814 or Banny: +6012-268 8586

ATS L*D FOR HONDA JAZZ GK5 / FK8 / FL5 / SWIFT ZC32 ZC33 IS AVAILABLE

ATS (Active Traction Service) L*D (Limited Slip Differential) distribution refers to how their high-performance clutch-type differentials distribute torque between wheels, offering various types like Metal, Carbon, and Carbon Hybrid to balance aggressive locking (for racing/drifting) with smooth, quiet operation (for street use) by adjusting internal disc configurations (e.g., 12, 16, 20 discs) and materials, allowing for custom settings like 1.5-way or 2-way locking, crucial for optimal traction and handling in performance driving.

Call for more details 012-2688586

📍BAE RACING
No33, jalan serendah 26/39, seksyen 26, kawasan perindustrian hicom, 40400 shah alam, selangor

⏳Operating hours - 10am-7pm (sunday closed)

HKS OIL COOLER KIT FK8 TYPE R

The K20C engine generates 320ps with 2.0 displacement; therefore, the vehicle is equipped with a water-cooled oil cooler to stabilize the extreme high engine output. However, under circuit driving, the temperature of both oil and water rise sharply because adequate heat radiation cannot be obtained, and fail safe mode becomes activated.
Adding HKS air cooling type oil cooler kit provides high heat exchange efficiency to suppress the temperature rise not only of the oil but also the water. HKS oil cooler kit includes a special aluminum air guide.

RM3800 ready stock 🔥 🔥

Call for more details 012-2688586

📍BAE RACING
No33, jalan serendah 26/39, seksyen 26, kawasan perindustrian hicom, 40400 shah alam, selangor

⏳Operating hours - 10am-7pm (sunday closed)