Lingtec
Share
We provide a wide range of equipment for:
• Non-Destructive Testing (NDT)
• Material Testing
• LINGTEC Instruments Sdn. Bhd.
(Company No. 201701008787 / 1222952-P) was established in 2017 and expanded with branches in Singapore and the Philippines in 2022.
This weld looks perfectly fine... until Magnetic Particle Inspection (MPI) reveals what the naked eye cannot see.
MPI uses magnetic fields and fine particles to detect surface and near-surface discontinuities that may compromise weld integrity, safety, and long-term asset reliability.
From pipe welds and girth welds to heat-affected zones (HAZ), MPI remains one of the most trusted NDT methods for identifying critical defects before they become costly failures.
Because in inspection, the most important defects are often the ones you can't see.
▶️ Watch the inspection process in action.
03/06/2026
Making Ultrasonic Inspection Smarter with Sonatest Wave
Designed to streamline every stage of the inspection process, the Sonatest Wave combines advanced ultrasonic testing capabilities with an intuitive user experience.
From setup and data acquisition to analysis and reporting, Wave helps inspectors work more efficiently while delivering accurate, reliable results.
Whether you're focused on productivity, precision, or ease of use, Sonatest Wave provides a practical solution for today's inspection challenges.
📈 Improve workflow efficiency
🎯 Achieve reliable inspection results
⚡ Simplify operations with an intuitive interface
Contact LINGTEC to learn more about the Sonatest Wave and how it can enhance your NDT inspections.
29/05/2026
Regional Public Holiday Notice (May–June 2026)
Please be informed that LINGTEC offices across different countries will observe the following public holidays:
LINGTEC Malaysia
31 May (Sunday): Wesak Day
1 June (Monday): Yang di-Pertuan Agong’s Birthday
2 June (Tuesday): Replacement Holiday for Wesak Day
LINGTEC Indonesia
1 June (Monday): Pancasila Day
LINGTEC Thailand
3 June (Wednesday): Queen’s Birthday
Kindly note that operations, responses, and logistics support may be affected during these dates, and will resume on the next working day in each respective country.
For urgent matters, please contact your respective account representative.
— Lingtec Group
28/05/2026
Take your structural inspection to the next level with the Elcometer 331 — a powerful all-in-one solution for concrete analysis and reinforcement assessment.
Designed for civil engineering and structural inspection applications, the Elcometer 331 combines:
▪ Rebar Location Detection
▪ Concrete Cover Measurement
▪ Corrosion Potential Analysis
all in a single portable instrument.
From bridges and buildings to critical infrastructure projects, the Elcometer 331 helps inspectors make faster, more confident decisions with accurate and reliable data.
▪ Fast & precise readings
▪ Rugged IP65 design
▪ Advanced data storage & reporting
▪ Ideal for QA/QC and structural assessment
Make better decisions. Ensure safety. Deliver quality.
Contact us today for more information or product enquiries.
26/05/2026
At LINGTEC, we believe it’s the small moments that make a workplace feel like a family 🎂 Today, we celebrated our May birthday team members with a simple cake session, laughter, and time together as one team.
We appreciate every member of our team and the positive energy they bring to the workplace every day. Creating a supportive, caring, and enjoyable working environment is always part of our culture.
Happy Birthday to all our May babies! Wishing you happiness, good health, and continued success ahead 🎉
26/05/2026
🌙 Hari Raya Haji Holiday Notice 🌙
Please be informed that LINGTEC Malaysia, Singapore, Philippines, and Indonesia offices will be closed on Wednesday, 27 May 2026 in conjunction with Hari Raya Haji.
Business operations will resume as usual on Thursday, 28 May 2026.
Wishing all our customers, partners, and friends a blessed Hari Raya Haji filled with peace, happiness, and meaningful moments with your loved ones.
Selamat Hari Raya Haji & Eid Mubarak from all of us at LINGTEC.
Heat treatment verification plays a critical role in ensuring product quality and reliability. Traditionally, destructive testing methods such as cutting, sample preparation, and pin-testing have been widely used — but these processes are time-consuming, labor-intensive, and impractical for large-scale sorting applications.
Today Eddy Current Testing (ET) has become the preferred solution for fast, reliable, and efficient inspection, both in laboratories and 100% inline production environments.
With decades of innovation, continues to set the benchmark in user-friendliness, accuracy, and preventive quality assurance. Their advanced technologies — iPMFT, iSHA, and iTAS — enable precise classificatory testing and sorting while helping manufacturers detect a wide range of flaws before they become costly issues.
From laboratory analysis to automated inline inspection, ibg solutions are trusted worldwide as the gold standard in preventive NDT qu
21/05/2026
One thing we always hear from QC teams is “Measurement itself is not the hard part… it’s the repetitive process every single day”
Especially when production volume gets higher - checking one by one, repeating the same measurement, ensuring every operator gets consistent results, and rushing against delivery timelines at the same time.
That’s why systems like the IM Series are becoming more common in manufacturing environments now. Instead of spending time aligning parts manually or repeating the same setup over and over again, the system allows users to simply place the parts and run the measurement automatically.
What we personally like about this system:
▪ Fast measurement process
▪ Auto position & orientation detection
▪ Multiple parts can be measured simultaneously
▪ User-friendly interface for daily operation
▪ Consistent measurement results between operators
For production and QC teams, small improvements in inspection time can actually make a huge difference to overall workflow and productivity. Technology keeps moving forward — and QC inspection is evolving together with it 😊
13/05/2026
📢 Holiday Notice – PT LINGTEC Instruments Indonesia Closure
Please be informed that our Indonesia office will be closed on 14–15 May 2026 in conjunction with the Ascension Day of Jesus Christ public holiday in Indonesia.
Business operations will resume as normal on 18 May 2026 (Monday).
We appreciate your understanding and apologise for any inconvenience caused. For urgent matters, please contact our respective team members directly.
Thank you and wishing everyone a pleasant holiday.
11/05/2026
Looking for a reliable and advanced light meter for your inspection work?
Introducing the Labino Apollo 3.1 — engineered to deliver precision, flexibility, and confidence in every measurement.
Designed for MPI, FPI, and radiographic testing applications, the Apollo 3.1 helps inspectors achieve accurate and compliant inspection results with ease.
Featuring UV-A, visible light (lux), and luminance measurement capabilities, along with a wireless Bluetooth sensor for safer and more convenient operation, it is the ideal solution for professionals who demand high performance and reliability in NDT inspections.
• UV-A, Lux & Luminance Measurement
• Ideal for RT Viewing Screens
• Wireless Bluetooth Sensor
• ISO 3059 Compliant
• Designed for Accurate & Reliable NDT Inspections
Upgrade your inspection accuracy with confidence.
Contact LINGTEC Instruments today for more information.
Click here to claim your Sponsored Listing.
Category
Contact the business
Telephone
Website
Address
No. 2, Jalan Hillpark Niaga 9/1
Puncak Alam
42300
Opening Hours
| Monday | 08:30 - 17:30 |
| Tuesday | 08:30 - 17:30 |
| Wednesday | 08:30 - 17:30 |
| Thursday | 08:30 - 17:30 |
| Friday | 08:30 - 17:30 |