Dukubu
Share
Designing and manufacturing user-friendly and high quality small automation, robotics and consumer electronics products.
3D printing and modelling. Hurray!
MB Dukubu was founded 26 March 2012. After almost 10 years in industry we had accumulated much knowledge and got many ideas, and decided to go for our own little company that would work in the fields of small-automation and robotics producing nice-useful-quality and inexpencive products for everyone. Have you ever thought of gadgets before accessible only to professionals in your daily life? Or th
26/10/2021
6-DOF Jointed Holders Installed At New Hollister Plant.
6-DOF jointed holders installed at new Hollister plant 4 of our 6-DOF jointed holders were installed at new Hollister plant in Kaunas. They are used to guide Siemens LR150 wireless level sensors to their positions on ICB tanks.
22/05/2021
About our Ultimaker project !
Projektas: Ultimaker 3D spausdintuvas - modifikacija. Interviu su Dukubu įmone. – 3D klasė Kalbiname Tadą, kad sužinotume kas slypi po šiuo projektu, kaip gimė idėja ir koks jų požiūris į 3D spausdinimo situaciją Lietuvoje.
“World knows desktop 3-D printing, desktop milling, desktop lasering, desktop casting – all sorts of small-scale manufacturing but where is desktop finishing?”
We are proud to announce our product D-CFM, which is an effective automated adjustable rpm (0-260) desktop centrifugal finishing machine. It is used for rough to fine (depending on used medium), dry and wet part surface finishing after parts were milled, 3d-printed, cut, drilled, sawed, etc.
D-CFM can finish plastic, metal, wooden part surfaces and give these surfaces state-of-the-art look ready for products on the shop-shelf.
All development tasks and engineering done by our team. Fully assembled and tested in DUKUBU premises.
This device was developed using Ultimaker 2 and Ultimaker 3 printers and is fully functional.
29/01/2021
Norime pristatyti savo naują kūrinį: Ultimaker 3D spausdintuvo remake'ą. Su šiuo spausdintuvu galima spausdinti detales iki 84 cm aukščio. Jeigu domina tokio spausdintuvo įsigyjimas, tokio dydžio detalių spausdinimas ar turite kitų idėjų, kreipkitės į mus!
We are happy to announce: our remake of Ultimaker 2 3D printer enables large dimension 3D manufacturing (230x210x840). If you need extra large printed parts, would like to have such a printer or have some good ideas, do not hesitate to contact us. Thank you Ultimaker!
22/01/2021
Apsauginės kaukės laikiklis, 5 vnt. kaina Šimtai tūkstančių prekių internetinėje parduotuvėje pigu.lt: kvepalai, buitinė technika, baldai ir kt. Prekybos centras internete - viskas vienoje vietoje!
30/12/2020
Džiaugiamės galėdami prisidėti prie šaunių šventinių projektų ir sprendimų, kurie suteikia gražią ir šventinę nuotaiką kiekvienam. Bendradarbiaudami su UAB EVOMEDIA (www.evomedia.lt) ir dizainere Ona Janulevičiene ([email protected]), padėjome įgyvendinti verslo dovanų projektą. Esame visada pasiruošę padėti įgyvendinti jūsų idėjas. Gražių visiems švenčių!!!
We are happy to be a part of such a great holiday project and create a festive mood for everyone. In collaboration with UAB EVOMEDIA www.evomedia.lt and great designer Ona Janulevičienė ([email protected]) we helped to develop business gift project. We are always ready to help implement your ideas. Happy holidays !!!
24/11/2020
Siūlome įsigyti kaukių laikiklius, kurie atitraukia kaukę nuo nosies ir lūpų. Tokiu būdu daug lengviau šnekėti ir padeda aktyviai judėti netgi su kauke. Ypač aktualu tiems, kas kaukes nešioja beveik visą darbo dieną. Išbandyta asmeniškai, tarp draugų ir šeimos narių. Patirtis labai teigiama. Lazeriuojame iš PET plastiko, tinkamo medicininėms reikmėms. Daukartinis naudojimas. Parduodame po 5 vnt. Kaip tik visai šeimai ar draugų ratui. Jau galima įsigyti mūsų elektroninėje parduotuvėje: https://eshop.dukubu.lt/index.php?route=product/product&path=59&product_id=56
30/10/2020
We worked hard to design a robust curtain roll up-down test/calibration system. All main parts were 3D printed and first unit installed at Tova manufacturing facility.
We worked hard to design a robust curtain roll up-down test/calibration system. All main parts were 3D printed and first unit installed at Tova manufacturing facility.
26/08/2020
Fully functioning new concept horizontal axis wind turbine (50 W nominal at 12 m/s winds, 50-100 VDC depending on winding wiring), printable with 200x200x200 mm volume 3D printers.
Advanced Horizontal Axis Wind Turbine (50W, 50V) Fully functioning new concept horizontal axis wind turbine (50 W nominal at 12 m/s winds, 50-100 VDC depending on winding wiring), printable with 200x200x200 mm volume 3D printers: - Includes assembly manual, intuitive assembly, takes 24-48 working hours to make depending on your 3d printer capabili...
27/05/2020
HORIZONTAL AXIS WIND TURBINE (25W, 24V). If you wish to print and assemble one you are welcome to download.
Horizontal Axis Wind Turbine (25W, 24V) Fully functioning horizontal axis wind turbine (25 W nominal, 50 W max, 24V): - Includes assembly manual, intuitive assembly. - 3D-Print all parts yourself with PC (black, white), cover with UV&water lacquer. - All numbers are calculation-based, turbine is designed for compact spaces, outside-tested...
26/05/2020
You can get STL files if you wish to print this device by yourself.
D-Nespresso Capsule Cleaner It is a known fact – most Nespresso and other producers’ coffee capsules finally appear in our waste-bins. We designed a tool “D-Nespresso-CC” (Nespresso Capsule Cleaner) that makes it easy to clean Nespresso coffee capsules at home. This coffee can be used in the garden, and aluminum recycl...
Click here to claim your Sponsored Listing.
Category
Contact the business
Website
Address
Panerių Gatvė 14
Vilnius
LT-01312
Opening Hours
| Monday | 08:00 - 17:00 |
| Tuesday | 08:00 - 17:00 |
| Wednesday | 08:00 - 17:00 |
| Thursday | 08:00 - 17:00 |
| Friday | 08:00 - 17:00 |